Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| KST | X08 Plus | Hobby |
8.4V 73.6 oz-in5.30 kg-cm0.5 N-m 7.4V 67.3 oz-in4.85 kg-cm0.5 N-m 6.0V 53.4 oz-in3.85 kg-cm0.4 N-m 3.8V 33.3 oz-in2.40 kg-cm0.2 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 3.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.32 oz9.0 g | 0.93×0.32×0.66 in 23.5×8.0×16.8 mm | — | Micro | Aluminum | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 900–2100 µs | 1520 µs | 2 µs | 333 Hz | Potentiometer | PWM | (add) | 3.8–8.4 V | DC | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | 205 mm8.07 in | China | 0.34–1.51 W | — | (add) | — | — | — | — | — | — | Position | (add) | Positional | (add) | — | — | ||
| KST | X08H | Hobby |
8.4V 38.9 oz-in2.80 kg-cm0.3 N-m 7.4V 37.5 oz-in2.70 kg-cm0.3 N-m 6.0V 30.6 oz-in2.20 kg-cm0.2 N-m 3.8V 19.5 oz-in1.40 kg-cm0.1 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 3.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.28 oz8.0 g | 0.93×0.32×0.66 in 23.5×8.0×16.8 mm | — | Micro | Aluminum | Coreless | (add) | Steel | 15 | Dual Bearings | Digital | (add) | 120° | (add) | 3.003 ms | 1000–2000 µs | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 3.8–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | 160 mm6.30 in | China | 0.20–0.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | 3.3–5V | ||
| KST | X08H Plus | Hobby |
8.4V 73.6 oz-in5.30 kg-cm0.5 N-m 7.4V 67.2 oz-in4.84 kg-cm0.5 N-m 6.0V 52.7 oz-in3.80 kg-cm0.4 N-m 3.8V 33.3 oz-in2.40 kg-cm0.2 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 3.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.32 oz9.0 g | 0.93×0.32×0.66 in 23.5×8.0×16.8 mm | — | Micro | Aluminum | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 1000–2000 µs | 1520 µs | 2 µs | (add) | Potentiometer | PWM | No | 3.8–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | 100 mm3.94 in | (add) | 0.34–1.51 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X08N | Hobby |
8.4V 38.9 oz-in2.80 kg-cm0.3 N-m 7.4V 37.5 oz-in2.70 kg-cm0.3 N-m 6.0V 30.5 oz-in2.20 kg-cm0.2 N-m 3.8V 19.4 oz-in1.40 kg-cm0.1 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 3.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.28 oz8.0 g | 0.93×0.32×0.66 in 23.5×8.0×16.8 mm | — | Micro | Aluminum | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | 1000–2000 µs | 1500 µs | 1 µs | 333 Hz | Potentiometer | PWM | Yes | 3.8–8.4 V | (add) | (add) | -5–65°C23.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 0.20–0.80 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X10 | Hobby |
8.4V 149.9 oz-in10.79 kg-cm1.1 N-m 7.4V 131.9 oz-in9.49 kg-cm0.9 N-m 6.0V 104.1 oz-in7.50 kg-cm0.7 N-m 4.8V 86.1 oz-in6.20 kg-cm0.6 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.99 oz28.0 g | 1.18×0.39×1.40 in 30.0×10.0×35.5 mm | — | Mini | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | (add) | 900–2100 µs | 1500 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 4.8–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | (add) | 0.99–2.77 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X10 Mini | Hobby |
8.4V 104.1 oz-in7.50 kg-cm0.7 N-m 7.4V 94.4 oz-in6.80 kg-cm0.7 N-m 6.0V 76.3 oz-in5.50 kg-cm0.5 N-m 4.8V 62.5 oz-in4.50 kg-cm0.4 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.81 oz23.0 g | 1.18×0.39×1.18 in 30.0×10.0×30.0 mm | — | Mini | Aluminum | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 100° | (add) | (add) | 900–2100 µs | 1500 µs | 2 µs | 333 Hz | Potentiometer | PWM | Yes | 4.8–8.4 V | 2S LiPo | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | 160 mm6.30 in | (add) | 0.72–1.92 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X10 Mini Pro | Hobby |
8.4V 111.0 oz-in8.00 kg-cm0.8 N-m 7.4V 99.9 oz-in7.20 kg-cm0.7 N-m 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m 4.8V 62.5 oz-in4.50 kg-cm0.4 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 0.71 oz20.0 g | 1.18×0.39×1.10 in 30.0×10.0×28.0 mm | — | Slim | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 120° | (add) | 3.003 ms | 900–2100 µs | 1520 µs | 2 µs | 333 Hz | Potentiometer | PWM | Yes | 4.8–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | 190 mm7.48 in | China | 0.89–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X10 Pro | Hobby |
8.4V 159.6 oz-in11.49 kg-cm1.1 N-m 7.4V 145.7 oz-in10.49 kg-cm1.0 N-m 6.0V 118.0 oz-in8.50 kg-cm0.8 N-m 4.8V 90.2 oz-in6.50 kg-cm0.6 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.88 oz25.0 g | 1.18×0.39×1.32 in 30.0×10.0×33.5 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 120° | (add) | 3.003 ms | 900–2100 µs | 1500 µs | 2 µs | 333 Hz | Potentiometer | PWM | Yes | 4.8–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 1.04–2.95 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X10-710 | Hobby |
8.4V 104.1 oz-in7.50 kg-cm0.7 N-m 7.4V 94.4 oz-in6.80 kg-cm0.7 N-m 6.0V 76.3 oz-in5.50 kg-cm0.5 N-m 4.8V 62.5 oz-in4.50 kg-cm0.4 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.81 oz23.0 g | 1.18×0.39×1.17 in 30.0×10.0×29.6 mm | — | Mini | Aluminum | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 100° | (add) | (add) | 900–2100 µs | 1500 µs | 2 µs | (add) | Potentiometer | PWM | Yes | 4.8–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | (add) | 0.72–1.92 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X12-508 | Hobby |
8.4V 86.1 oz-in6.20 kg-cm0.6 N-m 7.4V 72.2 oz-in5.20 kg-cm0.5 N-m 6.0V 58.3 oz-in4.20 kg-cm0.4 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 0.71 oz20.0 g | 0.91×0.47×1.08 in 23.0×12.0×27.5 mm | — | Mini | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | Bidirectional | 100° | 100 | 3.003 ms | 900–2100 µs | 1500 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | 2S LiPo | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 1.20–2.27 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X12-708 | Hobby |
8.4V 129.1 oz-in9.29 kg-cm0.9 N-m 7.4V 119.4 oz-in8.60 kg-cm0.8 N-m 6.0V 87.5 oz-in6.30 kg-cm0.6 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 0.71 oz20.0 g | 0.91×0.47×1.08 in 23.0×12.0×27.5 mm | — | Micro | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | 3.003 ms | 900–2100 µs | 1520 µs | 1 µs | 333 Hz | Potentiometer | PWM | Yes | 4.8–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | (add) | (add) | JR (Universal) | 210 mm8.27 in | (add) | 1.80–3.41 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X15-1208 | Hobby |
8.4V 187.4 oz-in13.49 kg-cm1.3 N-m 7.4V 166.6 oz-in11.99 kg-cm1.2 N-m 6.0V 136.0 oz-in9.80 kg-cm1.0 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.41 oz40.0 g | 1.40×0.59×1.28 in 35.5×15.0×32.5 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | 3.003 ms | 900–2100 µs | (add) | 2 µs | (add) | Potentiometer | PWM | (add) | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 2.52–4.95 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X15-1809 | Hobby |
8.4V 339.9 oz-in24.47 kg-cm2.4 N-m 7.4V 311.6 oz-in22.43 kg-cm2.2 N-m 6.0V 254.9 oz-in18.35 kg-cm1.8 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 1.59 oz45.0 g | 1.40×0.59×1.40 in 35.5×15.0×35.5 mm | — | Mini | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | 3.003 ms | 900–2100 µs | 1520 µs | 2 µs | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 5.24–8.98 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X15-755X | Hobby |
8.4V 141.6 oz-in10.19 kg-cm1.0 N-m 7.4V 124.9 oz-in9.00 kg-cm0.9 N-m 6.0V 99.9 oz-in7.20 kg-cm0.7 N-m |
8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 1.41 oz40.0 g | 1.40×0.59×1.28 in 35.5×15.0×32.5 mm | — | Standard | Aluminum | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 100° | (add) | 1.7857 ms | 450–1050 µs | (add) | (add) | 560 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 3.08–6.54 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X15-855X | Hobby |
8.4V 208.2 oz-in14.99 kg-cm1.5 N-m 7.4V 180.4 oz-in12.99 kg-cm1.3 N-m 6.0V 138.8 oz-in9.99 kg-cm1.0 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 1.59 oz45.0 g | 1.40×0.59×1.40 in 35.5×15.0×35.5 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | 1.7857 ms | 450–1050 µs | 760 µs | (add) | 560 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 3.67–7.70 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X15-908 | Hobby |
8.4V 127.7 oz-in9.20 kg-cm0.9 N-m 7.4V 111.0 oz-in8.00 kg-cm0.8 N-m 6.0V 90.2 oz-in6.50 kg-cm0.6 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.41 oz40.0 g | 1.40×0.59×1.28 in 35.5×15.0×32.5 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | 3.003 ms | 900–2100 µs | 1500 µs | (add) | (add) | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | (add) | (add) | JR (Universal) | 300 mm11.81 in | (add) | 1.67–3.37 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X20-1035 | Hobby |
8.4V 166.7 oz-in12.00 kg-cm1.2 N-m 7.4V 138.9 oz-in10.00 kg-cm1.0 N-m 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Mini | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | (add) | (add) | 1.7857 ms | 450–1050 µs | 760 µs | (add) | 560 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 5.78–10.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X20-12-M-835 | Hobby | 12.0V 666.2 oz-in47.97 kg-cm4.7 N-m | 12.0V 0.14 s/60°428.6 deg/s71.4 RPM | ≤3.25 A≤3250 mA | 2.82 oz80.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | 200° | (add) | 3.003 ms | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 9–13 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 8.80 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X20-1806 | Hobby |
8.4V 249.8 oz-in17.99 kg-cm1.8 N-m 7.4V 222.1 oz-in15.99 kg-cm1.6 N-m 6.0V 194.3 oz-in13.99 kg-cm1.4 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 1.76 oz50.0 g | 1.59×0.79×0.91 in 40.5×20.0×23.1 mm | — | Low Profile | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 200° | (add) | 3.003 ms | 900–2100 µs | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | IP65 | (add) | JR (Universal) | (add) | (add) | 4.49–7.70 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X20-2208 | Hobby |
8.4V 347.0 oz-in24.99 kg-cm2.5 N-m 7.4V 305.4 oz-in21.99 kg-cm2.2 N-m 6.0V 249.8 oz-in17.99 kg-cm1.8 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | 100° | (add) | (add) | 900–2100 µs | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 5.13–9.17 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X20-3005 | Hobby |
8.4V 444.2 oz-in31.98 kg-cm3.1 N-m 7.4V 416.4 oz-in29.98 kg-cm2.9 N-m 6.0V 333.1 oz-in23.99 kg-cm2.4 N-m |
8.4V 0.05 s/60°1,276.6 deg/s212.8 RPM 7.4V 0.05 s/60°1,153.8 deg/s192.3 RPM 6.0V 0.07 s/60°895.5 deg/s149.3 RPM |
(add) | 2.47 oz70.0 g | 1.59×0.79×1.50 in 40.5×20.0×38.0 mm | — | Standard | Aluminum | 4-pole | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | 3.003 ms | (add) | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | IP65 | (add) | JR (Universal) | (add) | (add) | 9.19–17.47 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X20-3012 * | Hobby |
8.4V 485.8 oz-in34.98 kg-cm3.4 N-m 7.4V 416.4 oz-in29.98 kg-cm2.9 N-m 6.0V 347.0 oz-in24.99 kg-cm2.5 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.54 oz72.0 g | 1.59×0.79×1.50 in 40.5×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | 100 | 3.003 ms | 900–2100 µs | 1500 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 4.28–8.17 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X20-4208 | Hobby |
8.4V 638.5 oz-in45.98 kg-cm4.5 N-m 7.4V 583.0 oz-in41.98 kg-cm4.1 N-m 6.0V 527.4 oz-in37.98 kg-cm3.7 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
7.6–12.6 A7600–12600 mA | 2.82 oz80.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | 200° | (add) | 3.003 ms | 1000–2000 µs | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | IP65 | (add) | JR (Universal) | (add) | China | 9.75–16.87 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X20-7.4-M-805 | Hobby |
8.4V 166.6 oz-in11.99 kg-cm1.2 N-m 7.4V 152.7 oz-in10.99 kg-cm1.1 N-m 6.0V 124.9 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.65 oz75.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | (add) | 6 | Digital | (add) | (add) | (add) | 1.7857 ms | 450–1050 µs | 760 µs | (add) | 560 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 5.77–10.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | 0.500° | 3-5V | ||
| KST | X20-7.4-M-820 | Hobby | 7.4V 416.4 oz-in29.98 kg-cm2.9 N-m | 7.4V 0.09 s/60°666.7 deg/s111.1 RPM | ≤4.95 A≤4950 mA | 2.65 oz75.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | 200° | (add) | 3.003 ms | 500–2500 µs | 1500 µs | (add) | 333 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 8.55 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
Make: KST
Stall Current: (add)
Shaft Power: 0.34–1.51 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.66 in 23.5×8.0×16.8 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: DC
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 205 mm8.07 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position
Make: KST
Stall Current: (add)
Shaft Power: 0.20–0.80 W
Weight: 0.28 oz8.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.66 in 23.5×8.0×16.8 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 1000–2000 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 160 mm6.30 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.34–1.51 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.66 in 23.5×8.0×16.8 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 100 mm3.94 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.20–0.80 W
Weight: 0.28 oz8.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.66 in 23.5×8.0×16.8 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 1000–2000 µs
Neutral Pos.: 1500 µs
Dead Band: 1 µs
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -5–65°C23.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.99–2.77 W
Weight: 0.99 oz28.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.18×0.39×1.40 in 30.0×10.0×35.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.72–1.92 W
Weight: 0.81 oz23.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.18×0.39×1.18 in 30.0×10.0×30.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 160 mm6.30 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.89–2.57 W
Weight: 0.71 oz20.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.10 in 30.0×10.0×28.0 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 190 mm7.48 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 1.04–2.95 W
Weight: 0.88 oz25.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.18×0.39×1.32 in 30.0×10.0×33.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.72–1.92 W
Weight: 0.81 oz23.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.18×0.39×1.17 in 30.0×10.0×29.6 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 1.20–2.27 W
Weight: 0.71 oz20.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.0×12.0×27.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Bidirectional
Op. Range: 100°
Mech. Limit: 100
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 1.80–3.41 W
Weight: 0.71 oz20.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.0×12.0×27.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 210 mm8.27 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 2.52–4.95 W
Weight: 1.41 oz40.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.40×0.59×1.28 in 35.5×15.0×32.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: (add)
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.24–8.98 W
Weight: 1.59 oz45.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.40 in 35.5×15.0×35.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 3.08–6.54 W
Weight: 1.41 oz40.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.40×0.59×1.28 in 35.5×15.0×32.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 1.7857 ms
Pulse Width: 450–1050 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 3.67–7.70 W
Weight: 1.59 oz45.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.40×0.59×1.40 in 35.5×15.0×35.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 1.7857 ms
Pulse Width: 450–1050 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 1.67–3.37 W
Weight: 1.41 oz40.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.40×0.59×1.28 in 35.5×15.0×32.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 300 mm11.81 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.78–10.27 W
Weight: 2.54 oz72.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 1.7857 ms
Pulse Width: 450–1050 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: ≤3.25 A≤3250 mA
Shaft Power: 8.80 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 9–13 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 4.49–7.70 W
Weight: 1.76 oz50.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.79×0.91 in 40.5×20.0×23.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: IP65
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.13–9.17 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 9.19–17.47 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.5×20.0×38.0 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: IP65
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 4.28–8.17 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.5×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: 100
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: 7.6–12.6 A7600–12600 mA
Shaft Power: 9.75–16.87 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 1000–2000 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: IP65
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.77–10.27 W
Weight: 2.65 oz75.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 1.7857 ms
Pulse Width: 450–1050 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: ≤4.95 A≤4950 mA
Shaft Power: 8.55 W
Weight: 2.65 oz75.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.