Discover XQ-Power Servos in Our eBay Store!
Shop NowRipmax Servos (25)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Ripmax | QZ101 | Hobby |
6.0V 43.2 oz-in3.11 kg-cm0.3 N-m 4.8V 35.3 oz-in2.54 kg-cm0.2 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 0.72 oz20.3 g | 0.91×0.47×1.06 in 23.1×11.9×26.9 mm | — | Micro | Metal | Brushed | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 0.82–1.33 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ102 | Hobby |
6.0V 34.7 oz-in2.50 kg-cm0.2 N-m 4.8V 30.6 oz-in2.20 kg-cm0.2 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.42 oz12.0 g | 0.91×0.47×1.00 in 23.1×11.9×25.4 mm | — | Micro | Plastic | Brushed | (add) | Steel | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 50 Hz | Potentiometer | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | 170 mm6.69 in | China | 0.47–0.64 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ103 | Hobby |
6.0V 58.3 oz-in4.20 kg-cm0.4 N-m 4.8V 44.5 oz-in3.20 kg-cm0.3 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 0.72 oz20.3 g | 0.91×0.47×1.09 in 23.1×11.9×27.7 mm | — | Micro | Aluminum | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | 170 mm6.69 in | China | 0.91–1.35 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ201 | Hobby |
6.0V 100.2 oz-in7.21 kg-cm0.7 N-m 4.8V 80.6 oz-in5.80 kg-cm0.6 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.92 oz26.2 g | 1.18×0.39×1.40 in 30.0×9.9×35.6 mm | — | Slim | Metal | Brushed | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 0.93–1.42 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ202 | Hobby |
6.0V 77.2 oz-in5.56 kg-cm0.5 N-m 4.8V 62.6 oz-in4.51 kg-cm0.4 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 0.81 oz23.1 g | 1.18×0.39×1.18 in 30.0×9.9×30.0 mm | — | Slim | Metal | Brushed | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 0.89–1.30 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ203 | Hobby |
6.0V 77.2 oz-in5.56 kg-cm0.5 N-m 4.8V 62.6 oz-in4.51 kg-cm0.4 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 0.79 oz22.5 g | 1.18×0.39×1.18 in 30.0×9.9×30.0 mm | — | Slim | Aluminum | Brushed | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 0.89–1.30 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ204 | Hobby |
6.0V 48.6 oz-in3.50 kg-cm0.3 N-m 4.8V 41.7 oz-in3.00 kg-cm0.3 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 0.62 oz17.5 g | 1.16×0.46×1.19 in 29.5×11.7×30.2 mm | — | Mini | Plastic | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 0.69–0.70 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ301 | Hobby | 4.8V 33.3 oz-in2.40 kg-cm0.2 N-m | 4.8V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 0.86 oz24.3 g | 1.42×0.59×1.28 in 36.1×15.0×32.5 mm | — | Standard | Plastic | Coreless | (add) | Plastic | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 4.8–4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 1.03 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ302 | Hobby |
6.0V 91.7 oz-in6.60 kg-cm0.6 N-m 4.8V 76.4 oz-in5.50 kg-cm0.5 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 0.93 oz26.3 g | 1.42×0.59×1.28 in 36.1×15.0×32.5 mm | — | Standard | Plastic | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 1.28–1.88 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ303 | Hobby |
8.4V 62.8 oz-in4.52 kg-cm0.4 N-m 4.8V 49.2 oz-in3.54 kg-cm0.3 N-m |
8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 4.8V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 0.93 oz26.3 g | 1.42×0.59×1.28 in 36.1×15.0×32.5 mm | — | Standard | Plastic | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 1.52–2.90 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ304 | Hobby |
7.4V 86.8 oz-in6.25 kg-cm0.6 N-m 6.0V 67.1 oz-in4.83 kg-cm0.5 N-m |
7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 1.20 oz34.1 g | 1.40×0.59×1.10 in 35.6×15.0×27.9 mm | — | Mini | Aluminum | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 2.29–2.48 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ401 | Hobby |
6.0V 132.4 oz-in9.53 kg-cm0.9 N-m 4.8V 119.2 oz-in8.58 kg-cm0.8 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.42 oz40.3 g | 1.61×0.80×1.04 in 40.9×20.3×26.4 mm | — | Low Profile | Metal / Plastic | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 2.00–2.72 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ501 | Hobby |
6.0V 129.9 oz-in9.35 kg-cm0.9 N-m 4.8V 120.2 oz-in8.65 kg-cm0.8 N-m |
6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.19 oz62.0 g | 1.59×0.80×1.50 in 40.4×20.3×38.1 mm | — | Standard | Plastic | Brushed | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 1.48–1.85 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ502 | Hobby |
6.0V 282.2 oz-in20.32 kg-cm2.0 N-m 4.8V 239.6 oz-in17.25 kg-cm1.7 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.19 oz62.0 g | 1.59×0.80×1.50 in 40.5×20.2×38.0 mm | — | Standard | Plastic | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | None | (add) | (add) | (add) | China | 2.77–3.73 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ504 | Hobby |
6.0V 192.1 oz-in13.83 kg-cm1.4 N-m 4.8V 160.2 oz-in11.53 kg-cm1.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.15 oz61.0 g | 1.59×0.80×1.44 in 40.4×20.3×36.6 mm | — | Standard | Plastic | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 2.47–3.55 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ507 | Hobby |
8.4V 156.3 oz-in11.25 kg-cm1.1 N-m 6.0V 121.5 oz-in8.75 kg-cm0.9 N-m |
8.4V 0.07 s/60°833.3 deg/s138.9 RPM 6.0V 0.10 s/60°631.6 deg/s105.3 RPM |
(add) | 2.09 oz59.3 g | 1.59×0.80×1.44 in 40.4×20.3×36.6 mm | — | Standard | Plastic | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 2.37–4.01 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ508 | Hobby |
8.4V 282.2 oz-in20.32 kg-cm2.0 N-m 6.0V 239.6 oz-in17.25 kg-cm1.7 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.09 oz59.3 g | 1.59×0.80×1.44 in 40.4×20.3×36.6 mm | — | Standard | Plastic | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 3.69–5.22 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ509 | Hobby |
8.4V 332.4 oz-in23.93 kg-cm2.3 N-m 6.0V 267.4 oz-in19.25 kg-cm1.9 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 6.0V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.54 oz72.0 g | 1.59×0.81×1.44 in 40.4×20.6×36.6 mm | — | Standard | Aluminum | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 330 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | Waterproof | (add) | (add) | (add) | England | 4.12–6.15 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ553 | Hobby |
7.2V 468.1 oz-in33.71 kg-cm3.3 N-m 6.0V 370.9 oz-in26.70 kg-cm2.6 N-m |
7.2V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.29 oz65.0 g | 1.59×0.81×1.57 in 40.4×20.6×39.9 mm | — | Standard | Plastic | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 1 µs | 330 Hz | (add) | (add) | (add) | 6–7.2 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 265 mm10.43 in | England | 5.27–7.87 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ701 | Hobby |
6.0V 416.7 oz-in30.01 kg-cm2.9 N-m 4.8V 333.4 oz-in24.00 kg-cm2.4 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.19 oz62.0 g | 1.59×0.81×1.59 in 40.4×20.6×40.4 mm | — | Standard | Aluminum / Plastic | (add) | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 3.85–5.50 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | QZ702HV | Hobby |
8.4V 416.7 oz-in30.01 kg-cm2.9 N-m 6.0V 333.4 oz-in24.00 kg-cm2.4 N-m |
8.4V 0.15 s/60°400.0 deg/s66.7 RPM 6.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.33 oz66.0 g | 1.59×0.81×1.59 in 40.4×20.6×40.4 mm | — | Standard | Aluminum / Plastic | (add) | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 3.63–5.14 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | SB09 | Hobby |
6.0V 22.2 oz-in1.60 kg-cm0.2 N-m 4.8V 16.7 oz-in1.20 kg-cm0.1 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.32 oz9.0 g | 1.26×0.47×1.44 in 32.0×11.9×36.6 mm | — | Mini | Plastic | Brushed | (add) | Nylon | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 50 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | England | 0.31–0.34 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | SD100 * | Hobby | 4.8V 15.3 oz-in1.10 kg-cm0.1 N-m | 4.8V 0.18 s/60°333.3 deg/s55.6 RPM | (add) | 0.17 oz4.7 g | 0.87×0.31×0.67 in 22.1×7.9×17.0 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.16 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | SD150 * | Hobby | 4.8V 20.8 oz-in1.50 kg-cm0.1 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.32 oz9.0 g | 0.96×0.36×1.14 in 24.4×9.1×29.0 mm | — | Slim | (add) | (add) | (add) | (add) | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.24 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Ripmax | SD200 * | Hobby | 4.8V 34.7 oz-in2.50 kg-cm0.2 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.56 oz16.0 g | 0.98×0.55×1.16 in 24.9×14.0×29.5 mm | — | Mini | (add) | (add) | (add) | (add) | (add) | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.46 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.82–1.33 W
Weight: 0.72 oz20.3 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.06 in 23.1×11.9×26.9 mm
Case Material: Metal
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.47–0.64 W
Weight: 0.42 oz12.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.00 in 23.1×11.9×25.4 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 50 Hz
Angle Sensor: Potentiometer
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 170 mm6.69 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.91–1.35 W
Weight: 0.72 oz20.3 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.09 in 23.1×11.9×27.7 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 170 mm6.69 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.93–1.42 W
Weight: 0.92 oz26.2 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.40 in 30.0×9.9×35.6 mm
Case Material: Metal
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.89–1.30 W
Weight: 0.81 oz23.1 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.18 in 30.0×9.9×30.0 mm
Case Material: Metal
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.89–1.30 W
Weight: 0.79 oz22.5 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.18 in 30.0×9.9×30.0 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.69–0.70 W
Weight: 0.62 oz17.5 g
Size Class: Mini
Diameter: —
Dimensions: 1.16×0.46×1.19 in 29.5×11.7×30.2 mm
Case Material: Plastic
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 1.03 W
Weight: 0.86 oz24.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.42×0.59×1.28 in 36.1×15.0×32.5 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 1.28–1.88 W
Weight: 0.93 oz26.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.42×0.59×1.28 in 36.1×15.0×32.5 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 1.52–2.90 W
Weight: 0.93 oz26.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.42×0.59×1.28 in 36.1×15.0×32.5 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 2.29–2.48 W
Weight: 1.20 oz34.1 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.10 in 35.6×15.0×27.9 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 2.00–2.72 W
Weight: 1.42 oz40.3 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.80×1.04 in 40.9×20.3×26.4 mm
Case Material: Metal / Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 1.48–1.85 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.50 in 40.4×20.3×38.1 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 2.77–3.73 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.50 in 40.5×20.2×38.0 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: None
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 2.47–3.55 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.44 in 40.4×20.3×36.6 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 2.37–4.01 W
Weight: 2.09 oz59.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.44 in 40.4×20.3×36.6 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 3.69–5.22 W
Weight: 2.09 oz59.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.44 in 40.4×20.3×36.6 mm
Case Material: Plastic
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 4.12–6.15 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.44 in 40.4×20.6×36.6 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 5.27–7.87 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.57 in 40.4×20.6×39.9 mm
Case Material: Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–7.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 3.85–5.50 W
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.59 in 40.4×20.6×40.4 mm
Case Material: Aluminum / Plastic
Motor Type: (add)
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 3.63–5.14 W
Weight: 2.33 oz66.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.81×1.59 in 40.4×20.6×40.4 mm
Case Material: Aluminum / Plastic
Motor Type: (add)
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.31–0.34 W
Weight: 0.32 oz9.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.26×0.47×1.44 in 32.0×11.9×36.6 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Nylon
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 50 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: England
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.16 W
Weight: 0.17 oz4.7 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.31×0.67 in 22.1×7.9×17.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.24 W
Weight: 0.32 oz9.0 g
Size Class: Slim
Diameter: —
Dimensions: 0.96×0.36×1.14 in 24.4×9.1×29.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Ripmax
Stall Current: (add)
Shaft Power: 0.46 W
Weight: 0.56 oz16.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.98×0.55×1.16 in 24.9×14.0×29.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.