Discover XQ-Power Servos in Our eBay Store!
Shop NowKST Servos (85)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| KST | SV905-12 | Hobby |
13.0V 236.0 oz-in16.99 kg-cm1.7 N-m 12.0V 222.1 oz-in15.99 kg-cm1.6 N-m 8.4V 180.4 oz-in12.99 kg-cm1.3 N-m |
13.0V 0.04 s/60°1,500.0 deg/s250.0 RPM 12.0V 0.05 s/60°1,333.3 deg/s222.2 RPM 8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 2.47 oz70.0 g | 1.59×0.79×1.50 in 40.4×20.0×38.0 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | (add) | (add) | PWM | (add) | 8–13 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.56–10.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | SV915-12 | Hobby |
13.0V 416.4 oz-in29.98 kg-cm2.9 N-m 12.0V 388.6 oz-in27.99 kg-cm2.7 N-m 8.4V 333.1 oz-in23.99 kg-cm2.4 N-m |
13.0V 0.07 s/60°857.1 deg/s142.9 RPM 12.0V 0.08 s/60°750.0 deg/s125.0 RPM 8.4V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.47 oz70.0 g | 1.59×0.79×1.50 in 40.4×20.0×38.0 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | (add) | (add) | PWM | (add) | 8–13 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 6.16–11.00 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X06 | Hobby |
8.4V 25.0 oz-in1.80 kg-cm0.2 N-m 6.0V 20.8 oz-in1.50 kg-cm0.1 N-m 3.8V 11.1 oz-in0.80 kg-cm0.1 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM 3.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.21 oz6.0 g | 0.79×0.28×0.65 in 20.0×7.0×16.6 mm | — | Nano | (add) | Coreless | (add) | Steel | (add) | Single Bearing | Digital | (add) | 120° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 3.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.17–0.66 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X06H | Hobby |
8.4V 25.0 oz-in1.80 kg-cm0.2 N-m 6.0V 20.8 oz-in1.50 kg-cm0.1 N-m 3.8V 11.1 oz-in0.80 kg-cm0.1 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM 3.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.21 oz6.0 g | 0.79×0.28×0.65 in 20.0×7.0×16.6 mm | — | Nano | (add) | Coreless | (add) | Steel | (add) | Single Bearing | Digital | (add) | 120° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 3.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.17–0.66 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X06N | Hobby |
8.4V 25.0 oz-in1.80 kg-cm0.2 N-m 6.0V 20.8 oz-in1.50 kg-cm0.1 N-m 3.8V 11.1 oz-in0.80 kg-cm0.1 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM 3.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.21 oz6.0 g | 0.79×0.28×0.65 in 20.0×7.0×16.6 mm | — | Nano | (add) | Coreless | (add) | Steel | (add) | Single Bearing | Digital | (add) | 120° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 3.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.17–0.66 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X08 | Hobby |
8.4V 38.9 oz-in2.80 kg-cm0.3 N-m 6.0V 30.5 oz-in2.20 kg-cm0.2 N-m 3.8V 19.4 oz-in1.40 kg-cm0.1 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 3.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.28 oz8.0 g | 0.93×0.32×0.66 in 23.5×8.0×16.8 mm | — | Micro | (add) | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 3.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.20–0.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X08 Plus | Hobby |
8.4V 73.6 oz-in5.30 kg-cm0.5 N-m 7.4V 67.3 oz-in4.85 kg-cm0.5 N-m 6.0V 53.4 oz-in3.85 kg-cm0.4 N-m 3.8V 33.3 oz-in2.40 kg-cm0.2 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 3.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.32 oz9.0 g | 0.93×0.32×0.66 in 23.5×8.0×16.8 mm | — | Micro | (add) | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 3.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.34–1.51 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X08H | Hobby |
8.4V 38.9 oz-in2.80 kg-cm0.3 N-m 6.0V 30.5 oz-in2.20 kg-cm0.2 N-m 3.8V 19.4 oz-in1.40 kg-cm0.1 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 3.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.28 oz8.0 g | 0.93×0.32×0.66 in 23.5×8.0×16.8 mm | — | Micro | (add) | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 3.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.20–0.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X08H Plus | Hobby |
8.4V 73.6 oz-in5.30 kg-cm0.5 N-m 7.4V 67.2 oz-in4.84 kg-cm0.5 N-m 6.0V 52.7 oz-in3.80 kg-cm0.4 N-m 3.8V 33.3 oz-in2.40 kg-cm0.2 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 3.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.32 oz9.0 g | 0.93×0.32×0.66 in 23.5×8.0×16.8 mm | — | Micro | (add) | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 3.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.34–1.51 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X08N | Hobby |
8.4V 38.9 oz-in2.80 kg-cm0.3 N-m 6.0V 30.5 oz-in2.20 kg-cm0.2 N-m 3.8V 19.4 oz-in1.40 kg-cm0.1 N-m |
8.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM 3.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 0.28 oz8.0 g | 0.93×0.32×0.66 in 23.5×8.0×16.8 mm | — | Micro | (add) | Coreless | (add) | Aluminum | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 3.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.20–0.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X10 | Hobby |
8.4V 149.9 oz-in10.79 kg-cm1.1 N-m 7.4V 131.9 oz-in9.49 kg-cm0.9 N-m 6.0V 104.1 oz-in7.50 kg-cm0.7 N-m 4.8V 86.1 oz-in6.20 kg-cm0.6 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.99 oz28.0 g | 1.18×0.39×1.40 in 30.0×10.0×35.5 mm | — | Slim | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 100° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.99–2.77 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X10 Mini | Hobby |
8.4V 104.1 oz-in7.50 kg-cm0.7 N-m 7.4V 94.4 oz-in6.80 kg-cm0.7 N-m 6.0V 76.3 oz-in5.50 kg-cm0.5 N-m 4.8V 62.5 oz-in4.50 kg-cm0.4 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.81 oz23.0 g | 1.18×0.39×1.18 in 30.0×10.0×30.0 mm | — | Slim | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 100° | (add) | (add) | 900–2100 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.72–1.92 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X10 Mini Pro | Hobby |
8.4V 111.0 oz-in8.00 kg-cm0.8 N-m 7.4V 99.9 oz-in7.20 kg-cm0.7 N-m 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m 4.8V 62.5 oz-in4.50 kg-cm0.4 N-m |
8.4V 0.08 s/60°750.0 deg/s125.0 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 0.81 oz23.0 g | 1.18×0.39×1.16 in 30.0×10.0×29.5 mm | — | Slim | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.89–2.57 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X10 Pro | Hobby |
8.4V 159.6 oz-in11.49 kg-cm1.1 N-m 7.4V 145.7 oz-in10.49 kg-cm1.0 N-m 6.0V 118.0 oz-in8.50 kg-cm0.8 N-m 4.8V 90.2 oz-in6.50 kg-cm0.6 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.88 oz25.0 g | 1.18×0.39×1.32 in 30.0×10.0×33.5 mm | — | Slim | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.04–2.95 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X10-710 | Hobby |
8.4V 104.1 oz-in7.50 kg-cm0.7 N-m 7.4V 94.4 oz-in6.80 kg-cm0.7 N-m 6.0V 76.3 oz-in5.50 kg-cm0.5 N-m 4.8V 62.5 oz-in4.50 kg-cm0.4 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.99 oz28.0 g | 1.18×0.39×1.40 in 30.0×10.0×35.5 mm | — | Slim | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 100° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.72–1.92 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X12-508 | Hobby |
8.4V 86.1 oz-in6.20 kg-cm0.6 N-m 7.4V 72.2 oz-in5.20 kg-cm0.5 N-m 6.0V 58.3 oz-in4.20 kg-cm0.4 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 0.71 oz20.0 g | 0.91×0.47×1.08 in 23.0×12.0×27.5 mm | — | Micro | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | 100° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.20–2.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X12-708 | Hobby |
8.4V 129.1 oz-in9.29 kg-cm0.9 N-m 7.4V 119.4 oz-in8.60 kg-cm0.8 N-m 6.0V 87.5 oz-in6.30 kg-cm0.6 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 0.75 oz21.3 g | 0.91×0.47×1.08 in 23.0×12.0×27.5 mm | — | Micro | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 100° | (add) | (add) | (add) | 1520 µs | 1 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.80–3.41 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X15-1208 | Hobby |
8.4V 187.4 oz-in13.49 kg-cm1.3 N-m 7.4V 166.6 oz-in11.99 kg-cm1.2 N-m 6.0V 136.0 oz-in9.80 kg-cm1.0 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.41 oz40.0 g | 1.40×0.59×1.28 in 35.5×15.0×32.5 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | 100° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.52–4.95 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X15-1809 | Hobby |
8.4V 333.1 oz-in23.99 kg-cm2.4 N-m 7.4V 305.4 oz-in21.99 kg-cm2.2 N-m 6.0V 249.8 oz-in17.99 kg-cm1.8 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.15 oz61.0 g | 1.57×0.79×1.52 in 40.0×20.0×38.5 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.13–8.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X15-755X | Hobby |
8.4V 141.6 oz-in10.19 kg-cm1.0 N-m 7.4V 124.9 oz-in9.00 kg-cm0.9 N-m 6.0V 99.9 oz-in7.20 kg-cm0.7 N-m |
8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 7.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 1.41 oz40.0 g | 1.40×0.59×1.28 in 35.5×15.0×32.5 mm | — | Standard | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.08–6.54 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X15-855X | Hobby |
8.4V 208.2 oz-in14.99 kg-cm1.5 N-m 7.4V 180.4 oz-in12.99 kg-cm1.3 N-m 6.0V 138.8 oz-in9.99 kg-cm1.0 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 1.59 oz45.0 g | 1.40×0.59×1.40 in 35.5×15.0×35.5 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 3.67–7.70 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X15-908 | Hobby |
8.4V 127.7 oz-in9.20 kg-cm0.9 N-m 7.4V 111.0 oz-in8.00 kg-cm0.8 N-m 6.0V 90.2 oz-in6.50 kg-cm0.6 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.41 oz40.0 g | 1.40×0.59×1.28 in 35.5×15.0×32.5 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | 100° | (add) | (add) | (add) | 1500 µs | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.67–3.37 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X20-1035 | Hobby |
8.4V 166.6 oz-in11.99 kg-cm1.2 N-m 7.4V 152.7 oz-in10.99 kg-cm1.1 N-m 6.0V 124.9 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 5.77–10.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X20-12-M-835 | Hobby | 12.0V 666.2 oz-in47.97 kg-cm4.7 N-m | 12.0V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 2.82 oz80.0 g | 1.57×0.79×1.57 in 40.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | 6 | Digital | (add) | 200° | (add) | (add) | (add) | 1520 µs | (add) | (add) | (add) | PWM | (add) | 9–13 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 8.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X20-1806 | Hobby |
8.4V 249.8 oz-in17.99 kg-cm1.8 N-m 7.4V 222.1 oz-in15.99 kg-cm1.6 N-m 6.0V 194.3 oz-in13.99 kg-cm1.4 N-m |
8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 1.76 oz50.0 g | 1.59×0.79×0.91 in 40.5×20.0×23.1 mm | — | Low Profile | (add) | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 200° | (add) | (add) | (add) | 1520 µs | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.49–7.70 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: KST
Stall Current: (add)
Shaft Power: 5.56–10.91 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.4×20.0×38.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 8–13 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 6.16–11.00 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.50 in 40.4×20.0×38.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 8–13 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.17–0.66 W
Weight: 0.21 oz6.0 g
Size Class: Nano
Diameter: —
Dimensions: 0.79×0.28×0.65 in 20.0×7.0×16.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.17–0.66 W
Weight: 0.21 oz6.0 g
Size Class: Nano
Diameter: —
Dimensions: 0.79×0.28×0.65 in 20.0×7.0×16.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.17–0.66 W
Weight: 0.21 oz6.0 g
Size Class: Nano
Diameter: —
Dimensions: 0.79×0.28×0.65 in 20.0×7.0×16.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.20–0.80 W
Weight: 0.28 oz8.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.66 in 23.5×8.0×16.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.34–1.51 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.66 in 23.5×8.0×16.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.20–0.80 W
Weight: 0.28 oz8.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.66 in 23.5×8.0×16.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.34–1.51 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.66 in 23.5×8.0×16.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.20–0.80 W
Weight: 0.28 oz8.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.93×0.32×0.66 in 23.5×8.0×16.8 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.99–2.77 W
Weight: 0.99 oz28.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.40 in 30.0×10.0×35.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.72–1.92 W
Weight: 0.81 oz23.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.18 in 30.0×10.0×30.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.89–2.57 W
Weight: 0.81 oz23.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.16 in 30.0×10.0×29.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 1.04–2.95 W
Weight: 0.88 oz25.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.32 in 30.0×10.0×33.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 0.72–1.92 W
Weight: 0.99 oz28.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.40 in 30.0×10.0×35.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 1.20–2.27 W
Weight: 0.71 oz20.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.0×12.0×27.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 1.80–3.41 W
Weight: 0.75 oz21.3 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.0×12.0×27.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 2.52–4.95 W
Weight: 1.41 oz40.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.40×0.59×1.28 in 35.5×15.0×32.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.13–8.80 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.52 in 40.0×20.0×38.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 3.08–6.54 W
Weight: 1.41 oz40.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.40×0.59×1.28 in 35.5×15.0×32.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 3.67–7.70 W
Weight: 1.59 oz45.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.40×0.59×1.40 in 35.5×15.0×35.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 1.67–3.37 W
Weight: 1.41 oz40.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.40×0.59×1.28 in 35.5×15.0×32.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.77–10.27 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 8.80 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 9–13 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 4.49–7.70 W
Weight: 1.76 oz50.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.79×0.91 in 40.5×20.0×23.1 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.