Discover XQ-Power Servos in Our eBay Store!
Shop NowDigital Servos (3,687)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Feetech | FT835BL | Hobby | 8.4V 555.6 oz-in40.01 kg-cm3.9 N-m | 8.4V 0.13 s/60°480.0 deg/s80.0 RPM | (add) | 2.72 oz77.2 g | 1.58×0.79×1.43 in 40.0×20.0×36.4 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | 4–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 8.22 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT846BL | Hobby | 7.4V 555.6 oz-in40.01 kg-cm3.9 N-m | 7.4V 0.15 s/60°397.4 deg/s66.2 RPM | (add) | 3.23 oz91.5 g | 1.58×0.79×1.50 in 40.0×20.0×38.0 mm | — | Standard | (add) | Brushless | (add) | Steel | (add) | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | 4–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 6.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT850M | Hobby | 8.4V 764.0 oz-in55.01 kg-cm5.4 N-m |
8.4V 0.10 s/60°612.2 deg/s102.0 RPM 8.4V 0.10 s/60°612.2 deg/s102.0 RPM |
(add) | 2.54 oz72.0 g | 1.57×0.79×1.43 in 40.0×20.0×36.4 mm | — | Standard | (add) | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 14.41 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT860B | Hobby | 8.4V 972.3 oz-in70.01 kg-cm6.9 N-m |
8.4V 0.09 s/60°697.7 deg/s116.3 RPM 8.4V 0.09 s/60°697.7 deg/s116.3 RPM |
(add) | 2.96 oz84.0 g | 1.57×0.79×1.57 in 40.0×20.0×39.9 mm | — | Standard | (add) | Brushless | (add) | Steel | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–9 V | (add) | (add) | (add) | (add) | (add) | (add) | 300 mm11.81 in | China | 20.90 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT870B | Hobby | 8.4V 1,041.8 oz-in75.01 kg-cm7.4 N-m |
8.4V 0.14 s/60°422.5 deg/s70.4 RPM 8.4V 0.14 s/60°422.5 deg/s70.4 RPM |
(add) | 2.78 oz78.8 g | 1.57×0.79×1.54 in 40.0×20.0×39.0 mm | — | Standard | (add) | Brushless | (add) | Titanium | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–9 V | (add) | (add) | (add) | (add) | (add) | (add) | 300 mm11.81 in | China | 13.56 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 26.000 A26,000 mA | — | — | ||
| Feetech | FT9025M | Hobby | 4.8V 118.1 oz-in8.50 kg-cm0.8 N-m | 4.8V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 1.24 oz35.2 g | 1.42×0.59×1.15 in 36.0×15.0×29.2 mm | — | Mini | (add) | Coreless | (add) | Steel | (add) | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | (add) | (add) | 3–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 1.68 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT90B | Hobby |
6.0V 20.8 oz-in1.50 kg-cm0.1 N-m 4.8V 18.1 oz-in1.30 kg-cm0.1 N-m 3.0V 13.9 oz-in1.00 kg-cm0.1 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM 3.0V 0.16 s/60°375.0 deg/s62.5 RPM |
0.4–0.7 A400–700 mA | 0.37 oz10.5 g | 0.89×0.48×0.88 in 22.5×12.1×22.4 mm | — | Micro | Plastic | Brushed | (add) | Plastic | 21 | Bushing | Digital | (add) | 180° | 180 | (add) | 500–2500 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 3–6 V | (add) | (add) | -20–70°C-4.0–158.0°F | (add) | (add) | (add) | (add) | China | 0.16–0.43 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT90R | Hobby |
6.0V 20.8 oz-in1.50 kg-cm0.1 N-m 4.8V 18.1 oz-in1.30 kg-cm0.1 N-m 3.0V 13.9 oz-in1.00 kg-cm0.1 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM 3.0V 0.16 s/60°375.0 deg/s62.5 RPM |
0.4–0.55 A400–550 mA | 0.32 oz9.0 g | 0.90×0.48×1.04 in 22.9×12.1×26.5 mm | — | Micro | (add) | Brushed | (add) | Plastic | 21 | Bushing | Digital | Bidirectional | 360° | (add) | (add) | 700–2300 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 3–6 V | (add) | (add) | -15–70°C5.0–158.0°F | (add) | (add) | JR (Universal) | (add) | China | 0.16–0.48 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT955B | Hobby | 8.4V 694.5 oz-in50.01 kg-cm4.9 N-m |
8.4V 0.12 s/60°504.2 deg/s84.0 RPM 8.4V 0.12 s/60°504.2 deg/s84.0 RPM |
(add) | 3.35 oz95.1 g | 1.72×0.88×1.57 in 43.7×22.3×39.8 mm | — | Large | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 10.79 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT965B | Hobby | 8.4V 277.8 oz-in20.00 kg-cm2.0 N-m |
8.4V 0.15 s/60°402.7 deg/s67.1 RPM 8.4V 0.15 s/60°402.7 deg/s67.1 RPM |
(add) | 3.35 oz95.1 g | 1.72×0.88×1.57 in 43.7×22.3×39.8 mm | — | Large | (add) | Brushless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 3.45 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FT985M | Hobby |
8.4V 1,319.6 oz-in95.02 kg-cm9.3 N-m 7.4V 1,180.7 oz-in85.02 kg-cm8.3 N-m |
7.4V 0.26 s/60°228.1 deg/s38.0 RPM 7.4V 0.26 s/60°228.1 deg/s38.0 RPM |
≤9.5 A≤9500 mA | 6.91 oz195.9 g | 2.32×1.14×2.17 in 59.0×29.0×55.0 mm | — | Giant | Plastic / Aluminum | Cored | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | 6–9 V | (add) | (add) | (add) | IP66 | (add) | (add) | (add) | China | 8.30 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 26.000 A26,000 mA | — | — | ||
| Feetech | FT995M | Hobby | 7.4V 312.5 oz-in22.50 kg-cm2.2 N-m |
7.4V 0.27 s/60°223.9 deg/s37.3 RPM 7.4V 0.27 s/60°223.9 deg/s37.3 RPM |
(add) | 6.61 oz187.5 g | 2.56×1.18×1.89 in 65.0×30.0×48.0 mm | — | Giant | (add) | Cored | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 2.16 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | FU8830 | Hobby |
7.4V 479.2 oz-in34.51 kg-cm3.4 N-m 6.0V 479.2 oz-in34.51 kg-cm3.4 N-m |
7.4V 0.08 s/60°722.9 deg/s120.5 RPM 7.4V 0.08 s/60°722.9 deg/s120.5 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 3.05 oz86.4 g | 1.57×0.79×1.54 in 40.0×20.0×39.0 mm | — | Standard | (add) | Brushless | (add) | Titanium | 25 | Single Bearing | Digital | (add) | 180° | (add) | (add) | 500–2500 µs | 1500 µs | 4 µs | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | 300 mm11.81 in | China | 10.68–11.08 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | 55.000 A55,000 mA | — | — | ||
| Feetech | HLS3606M | Robotics |
6.0V 83.3 oz-in6.00 kg-cm0.6 N-m 4.8V 66.7 oz-in4.80 kg-cm0.5 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
1.1–1.3 A1100–1300 mA | 0.80 oz22.7 g | 0.91×0.47×1.08 in 23.0×12.0×27.5 mm | (add) | Micro | Aluminum | Coreless | (add) | Copper / Steel | 25 | Single Bearing | Digital | Clockwise | 360° | (add) | (add) | (add) | (add) | (add) | 1000 Hz | Absolute Encoder | TTL-PID | Yes | 4.5–7.4 V | External | Direct | -20–60°C-4.0–140.0°F | (add) | ROHS | EMC | Custom | 150 mm5.91 in | China | 1.12–1.71 W | Boxed | 4.9 mm | 4,096 p/r | 205.000 | 38.4 Kbps–1 Mbps | (add) | (add) | (add) | Position, Velocity, Current | 0.150 A @ 6.0V150 mA @ 6.0V | Multi-Turn | 0.020 A20 mA | (add) | 3.3-5V | ||
| Feetech | HLS3612M | Hobby | 7.4V 208.4 oz-in15.00 kg-cm1.5 N-m | 7.4V 0.15 s/60°408.2 deg/s68.0 RPM | (add) | 1.35 oz38.2 g | 1.42×0.59×1.15 in 36.0×15.0×29.2 mm | — | Mini | (add) | Coreless | (add) | Steel | (add) | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 2.62 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | HLS3620M | Hobby | 8.4V 354.2 oz-in25.51 kg-cm2.5 N-m | 8.4V 0.14 s/60°444.4 deg/s74.1 RPM | (add) | 2.18 oz61.7 g | 1.58×0.80×1.58 in 40.2×20.2×40.0 mm | — | Standard | (add) | Cored | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.85 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | HLS3625M | Hobby | 7.4V 347.3 oz-in25.00 kg-cm2.5 N-m | 7.4V 0.19 s/60°312.5 deg/s52.1 RPM | (add) | 1.94 oz55.0 g | 1.78×0.97×1.38 in 45.2×24.7×35.0 mm | — | Standard | (add) | Cored | (add) | Metal | (add) | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 3.34 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | HLS3640M | Hobby | 7.4V 555.6 oz-in40.01 kg-cm3.9 N-m | 7.4V 0.22 s/60°272.7 deg/s45.5 RPM | (add) | 3.14 oz89.0 g | 1.58×0.82×1.70 in 40.0×20.7×43.1 mm | — | Standard | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.67 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | HLS3925M | Hobby | 12.0V 347.3 oz-in25.00 kg-cm2.5 N-m | 12.0V 0.18 s/60°329.7 deg/s54.9 RPM | (add) | 2.18 oz61.7 g | 1.58×0.80×1.58 in 40.2×20.2×40.0 mm | — | Standard | (add) | Cored | (add) | Metal | (add) | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 3.53 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | HLS3930M | Hobby | 12.0V 486.2 oz-in35.01 kg-cm3.4 N-m | 12.0V 0.22 s/60°270.3 deg/s45.0 RPM | (add) | 2.49 oz70.5 g | 1.78×0.97×1.38 in 45.2×24.7×35.0 mm | — | Standard | (add) | Cored | (add) | Steel | (add) | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 4.05 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | HLS3935M | Hobby | 12.0V 486.2 oz-in35.01 kg-cm3.4 N-m | 12.0V 0.12 s/60°512.8 deg/s85.5 RPM | (add) | 3.00 oz85.0 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | (add) | Coreless | (add) | Steel | (add) | Dual Bearings | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 7.68 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | HLS3950M | Hobby | 12.0V 694.5 oz-in50.01 kg-cm4.9 N-m | 12.0V 0.13 s/60°451.1 deg/s75.2 RPM | (add) | 2.63 oz74.5 g | 1.78×0.97×1.38 in 45.2×24.7×35.1 mm | — | Standard | (add) | Coreless | (add) | Steel | (add) | Single Bearing | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 9.66 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | HLS3955M | Hobby | 12.0V 764.0 oz-in55.01 kg-cm5.4 N-m | 12.0V 0.18 s/60°329.7 deg/s54.9 RPM | (add) | 3.00 oz85.0 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | (add) | Coreless | (add) | Steel | (add) | Single Bearing | Digital | (add) | 180° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | China | 7.76 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | SCS46-C001 | Hobby | 7.4V 562.6 oz-in40.51 kg-cm4.0 N-m |
7.4V 0.22 s/60°272.7 deg/s45.5 RPM 7.4V 0.22 s/60°272.7 deg/s45.5 RPM |
≤4.4 A≤4400 mA | 3.14 oz89.0 g | 1.57×0.79×1.69 in 40.0×20.0×43.1 mm | — | Standard | (add) | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | TTL / SBUS | (add) | 6–7.4 V | (add) | (add) | (add) | (add) | (add) | (add) | 150 mm5.91 in | China | 4.73 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Feetech | SCS46-C005 | Hobby |
7.4V 562.6 oz-in40.51 kg-cm4.0 N-m 6.0V 562.6 oz-in40.51 kg-cm4.0 N-m |
7.4V 0.21 s/60°285.7 deg/s47.6 RPM 7.4V 0.21 s/60°285.7 deg/s47.6 RPM 6.0V 0.21 s/60°285.7 deg/s47.6 RPM 6.0V 0.21 s/60°285.7 deg/s47.6 RPM |
(add) | 3.10 oz88.0 g | 1.57×0.79×1.69 in 39.9×20.1×42.9 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | 360° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.95 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Feetech
Stall Current: (add)
Shaft Power: 8.22 W
Weight: 2.72 oz77.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.43 in 40.0×20.0×36.4 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 6.80 W
Weight: 3.23 oz91.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.50 in 40.0×20.0×38.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 14.41 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.43 in 40.0×20.0×36.4 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 20.90 W
Weight: 2.96 oz84.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.57 in 40.0×20.0×39.9 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 13.56 W
Weight: 2.78 oz78.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 1.68 W
Weight: 1.24 oz35.2 g
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.59×1.15 in 36.0×15.0×29.2 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 3–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 0.4–0.7 A400–700 mA
Shaft Power: 0.16–0.43 W
Weight: 0.37 oz10.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.89×0.48×0.88 in 22.5×12.1×22.4 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 21
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–70°C-4.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 0.4–0.55 A400–550 mA
Shaft Power: 0.16–0.48 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.90×0.48×1.04 in 22.9×12.1×26.5 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 21
Rotation: Bushing
Modulation: Digital
Direction: Bidirectional
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 700–2300 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–70°C5.0–158.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 10.79 W
Weight: 3.35 oz95.1 g
Size Class: Large
Diameter: —
Dimensions: 1.72×0.88×1.57 in 43.7×22.3×39.8 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 3.45 W
Weight: 3.35 oz95.1 g
Size Class: Large
Diameter: —
Dimensions: 1.72×0.88×1.57 in 43.7×22.3×39.8 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤9.5 A≤9500 mA
Shaft Power: 8.30 W
Weight: 6.91 oz195.9 g
Size Class: Giant
Diameter: —
Dimensions: 2.32×1.14×2.17 in 59.0×29.0×55.0 mm
Case Material: Plastic / Aluminum
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–9 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP66
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 2.16 W
Weight: 6.61 oz187.5 g
Size Class: Giant
Diameter: —
Dimensions: 2.56×1.18×1.89 in 65.0×30.0×48.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 10.68–11.08 W
Weight: 3.05 oz86.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 40.0×20.0×39.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: 4 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 300 mm11.81 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: 1.1–1.3 A1100–1300 mA
Shaft Power: 1.12–1.71 W
Weight: 0.80 oz22.7 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×1.08 in 23.0×12.0×27.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Copper / Steel
Gear Spline/Teeth: 25
Rotation: Single Bearing
Modulation: Digital
Direction: Clockwise
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: Absolute Encoder
Control System: TTL-PID
Programmable: Yes
Op. Voltage: 4.5–7.4 V
Power Source: External
Regulator Type: Direct
Temperature: -20–60°C-4.0–140.0°F
Water Rating: (add)
Certification: ROHS | EMC
Connector: Custom
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: Boxed
Shaft Size: 4.9 mm
Resolution: 4,096 p/r
Gear Ratio: 205.000
Baud Rate: 38.4 Kbps–1 Mbps
Output Power: —
Radial Load: —
MCU: —
Operating Modes: Position, Velocity, Current
Make: Feetech
Stall Current: (add)
Shaft Power: 2.62 W
Weight: 1.35 oz38.2 g
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.59×1.15 in 36.0×15.0×29.2 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 4.85 W
Weight: 2.18 oz61.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.80×1.58 in 40.2×20.2×40.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 3.34 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.78×0.97×1.38 in 45.2×24.7×35.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 4.67 W
Weight: 3.14 oz89.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.82×1.70 in 40.0×20.7×43.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 3.53 W
Weight: 2.18 oz61.7 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.80×1.58 in 40.2×20.2×40.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 4.05 W
Weight: 2.49 oz70.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.78×0.97×1.38 in 45.2×24.7×35.0 mm
Case Material: (add)
Motor Type: Cored
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 7.68 W
Weight: 3.00 oz85.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 9.66 W
Weight: 2.63 oz74.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.78×0.97×1.38 in 45.2×24.7×35.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 7.76 W
Weight: 3.00 oz85.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: ≤4.4 A≤4400 mA
Shaft Power: 4.73 W
Weight: 3.14 oz89.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.69 in 40.0×20.0×43.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: TTL / SBUS
Programmable: (add)
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 150 mm5.91 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Feetech
Stall Current: (add)
Shaft Power: 4.95 W
Weight: 3.10 oz88.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.69 in 39.9×20.1×42.9 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 360°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.