Discover XQ-Power Servos in Our eBay Store!
Shop NowDigital Servos (3,700)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Trinity | HT-1980 | Hobby |
8.4V 264.0 oz-in19.01 kg-cm1.9 N-m 7.4V 250.0 oz-in18.00 kg-cm1.8 N-m 6.0V 222.0 oz-in15.99 kg-cm1.6 N-m |
8.4V 0.07 s/60°821.9 deg/s137.0 RPM 7.4V 0.08 s/60°722.9 deg/s120.5 RPM 6.0V 0.10 s/60°631.6 deg/s105.3 RPM |
(add) | 2.19 oz62.0 g | 1.61×0.80×1.04 in 40.8×20.2×26.5 mm | — | Low Profile | Aluminum | Brushless | (add) | Titanium / Steel | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | -15–65.5556°C5.0–150.0°F | (add) | (add) | (add) | 100 mm3.94 in | (add) | 4.32–6.69 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | 620DMG+HS | Hobby | 6.0V 147.2 oz-in10.60 kg-cm1.0 N-m | 4.8V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 1.83 oz52.0 g | 1.59×0.79×1.65 in 40.5×20.0×42.0 mm | — | Standard | (add) | Brushed | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | BLS950 * | Hobby |
6.0V 159.7 oz-in11.50 kg-cm1.1 N-m 4.8V 127.8 oz-in9.20 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.97 oz55.8 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | 1520 µs | 8 µs | 333 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.69–2.46 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | BLS980 * | Hobby |
6.0V 43.1 oz-in3.10 kg-cm0.3 N-m 4.8V 34.7 oz-in2.50 kg-cm0.2 N-m |
6.0V 0.03 s/60°2,000.0 deg/s333.3 RPM 4.8V 0.04 s/60°1,500.0 deg/s250.0 RPM |
≤2.3 A≤2300 mA | 2.48 oz70.3 g | 1.58×0.79×1.58 in 40.0×20.0×40.0 mm | — | Standard | (add) | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 4 ms | (add) | 760 µs | 4 µs | 560 Hz | (add) | (add) | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.60–2.65 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | DMC809 | Hobby |
6.0V 52.7 oz-in3.80 kg-cm0.4 N-m 4.8V 41.6 oz-in3.00 kg-cm0.3 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 0.69 oz19.5 g | 1.24×0.47×1.26 in 31.5×12.0×32.1 mm | — | Mini | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.96–1.39 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | DS480 * | Hobby | 4.8V 25.7 oz-in1.85 kg-cm0.2 N-m | 4.8V 0.07 s/60°882.4 deg/s147.1 RPM | (add) | 0.34 oz9.5 g | 0.89×0.39×0.93 in 22.5×10.0×23.5 mm | — | Micro | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 2 µs | 333 Hz | (add) | (add) | (add) | 4.8–5 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | (add) | 0.70 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | HV-300 * | Hobby |
12.0V 533.3 oz-in38.40 kg-cm3.8 N-m 8.4V 373.6 oz-in26.90 kg-cm2.6 N-m |
12.0V 0.13 s/60°461.5 deg/s76.9 RPM 8.4V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.79 oz79.0 g | 1.58×0.79×1.77 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | (add) | 1 µs | (add) | (add) | (add) | (add) | 8.4–12 V | (add) | (add) | -10–60°C14.0–140.0°F | (add) | (add) | JR (Universal) | 150 mm5.91 in | (add) | 3.84–7.58 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | HV-380 * | Hobby |
12.0V 144.4 oz-in10.40 kg-cm1.0 N-m 8.4V 101.4 oz-in7.30 kg-cm0.7 N-m |
12.0V 0.03 s/60°2,000.0 deg/s333.3 RPM 8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.79 oz79.0 g | 1.58×0.79×1.77 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 12 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.69–8.90 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | HV-767 * | Hobby |
7.4V 430.5 oz-in31.00 kg-cm3.0 N-m 6.0V 347.2 oz-in25.00 kg-cm2.5 N-m |
7.4V 0.12 s/60°508.5 deg/s84.7 RPM 6.0V 0.15 s/60°413.8 deg/s69.0 RPM |
(add) | 2.75 oz77.9 g | 1.58×0.79×1.77 in 40.0×20.0×45.0 mm | — | Standard | (add) | Coreless | (add) | Titanium | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 8 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 4.43–6.75 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | MG90S | Hobby |
6.0V 30.5 oz-in2.20 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.63 oz18.0 g | 0.90×0.48×1.12 in 22.9×12.2×28.4 mm | — | Mini | (add) | Brushless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.46–0.71 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TG9D | Hobby |
6.0V 33.0 oz-in2.38 kg-cm0.2 N-m 4.8V 29.3 oz-in2.11 kg-cm0.2 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.32 oz9.0 g | 0.88×0.49×0.91 in 22.4×12.5×23.0 mm | — | Micro | (add) | Brushed | (add) | Plastic | (add) | Bushing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.54–0.68 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-0025 | Hobby |
6.0V 11.1 oz-in0.80 kg-cm0.1 N-m 4.8V 9.7 oz-in0.70 kg-cm0.1 N-m |
6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 0.09 oz2.5 g | 0.77×0.32×0.64 in 19.6×8.2×16.3 mm | — | Micro | (add) | (add) | (add) | Plastic | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.22–0.29 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-2216MG * | Hobby | 4.8V 43.1 oz-in3.10 kg-cm0.3 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.57 oz16.2 g | (add) | — | Unknown | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.5–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.50 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-225MG | Hobby |
6.0V 48.6 oz-in3.50 kg-cm0.3 N-m 4.8V 41.6 oz-in3.00 kg-cm0.3 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.92 oz26.0 g | 1.22×0.63×1.22 in 31.0×16.0×31.0 mm | — | Mini | (add) | Brushed | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.55–0.75 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-375DMG * | Hobby |
6.0V 31.9 oz-in2.30 kg-cm0.2 N-m 4.8V 22.2 oz-in1.60 kg-cm0.2 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 0.40 oz11.4 g | 0.96×0.45×0.91 in 24.5×11.5×23.0 mm | — | Micro | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.32–0.54 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-390DMH | Hobby |
6.0V 75.0 oz-in5.40 kg-cm0.5 N-m 4.8V 63.9 oz-in4.60 kg-cm0.5 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.79 oz22.5 g | 1.14×0.51×1.18 in 29.0×13.0×30.0 mm | — | Mini | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 3 ms | (add) | 1520 µs | (add) | 200 Hz | (add) | (add) | (add) | 4.8–6.6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.84–1.26 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-4409MD | Hobby |
6.0V 131.2 oz-in9.45 kg-cm0.9 N-m 4.8V 120.1 oz-in8.65 kg-cm0.8 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 1.55 oz44.0 g | 1.61×0.80×1.16 in 41.0×20.3×29.5 mm | — | Low Profile | (add) | Brushless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | 2 µs | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.71–2.20 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-811 | Hobby |
6.0V 150.3 oz-in10.82 kg-cm1.1 N-m 4.8V 121.0 oz-in8.71 kg-cm0.9 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 1.06 oz30.0 g | 1.18×0.39×1.38 in 30.0×9.9×35.1 mm | — | Slim | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.49–2.32 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-813 | Hobby |
6.0V 165.0 oz-in11.88 kg-cm1.2 N-m 4.8V 143.0 oz-in10.29 kg-cm1.0 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.06 oz30.0 g | 1.18×0.39×1.38 in 30.0×10.0×35.0 mm | — | Slim | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.40–3.39 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-9150MG * | Hobby | 4.8V 219.4 oz-in15.80 kg-cm1.5 N-m | 4.8V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 2.12 oz60.0 g | 1.58×0.79×1.46 in 40.0×20.0×37.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.5–7.2 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.39 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-930 * | Hobby | 4.8V 50.0 oz-in3.60 kg-cm0.4 N-m | 6.0V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.92 oz26.0 g | 1.42×0.59×1.30 in 36.0×15.0×33.0 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-D56MG | Hobby |
6.0V 16.7 oz-in1.20 kg-cm0.1 N-m 4.8V 11.8 oz-in0.85 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.20 oz5.6 g | 0.78×0.32×0.83 in 19.8×8.2×21.2 mm | — | Micro | (add) | Coreless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8–7.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.16–0.31 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-DS530 * | Hobby |
6.0V 41.7 oz-in3.00 kg-cm0.3 N-m 4.8V 40.0 oz-in2.88 kg-cm0.3 N-m |
6.0V 0.09 s/60°638.3 deg/s106.4 RPM 4.8V 0.10 s/60°612.2 deg/s102.0 RPM |
(add) | 0.46 oz13.0 g | 0.91×0.47×0.98 in 23.0×12.0×25.0 mm | — | Micro | (add) | Brushed | (add) | Hybrid | (add) | Dual Bearings | Digital | (add) | (add) | (add) | 2 ms | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.75–0.82 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-MG90S | Hobby |
6.0V 30.6 oz-in2.20 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.47 oz13.4 g | 0.90×0.48×1.12 in 22.8×12.2×28.5 mm | — | Mini | (add) | Coreless | (add) | Metal | 21 | Single Bearing | Digital | (add) | 60° | (add) | (add) | (add) | (add) | 1 µs | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | ≤55°C≤131.0°F | (add) | (add) | JR (Universal) | 250 mm9.84 in | (add) | 0.46–0.71 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Turnigy | TGY-MG930 * | Hobby |
6.0V 62.5 oz-in4.50 kg-cm0.4 N-m 4.8V 50.0 oz-in3.60 kg-cm0.4 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 0.92 oz26.0 g | 1.42×0.60×1.13 in 36.0×15.2×28.7 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.66–1.05 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Trinity
Stall Current: (add)
Shaft Power: 4.32–6.69 W
Weight: 2.19 oz62.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.80×1.04 in 40.8×20.2×26.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium / Steel
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -15–65.5556°C5.0–150.0°F
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 100 mm3.94 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: —
Weight: 1.83 oz52.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.65 in 40.5×20.0×42.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.69–2.46 W
Weight: 1.97 oz55.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 8 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: ≤2.3 A≤2300 mA
Shaft Power: 1.60–2.65 W
Weight: 2.48 oz70.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.58 in 40.0×20.0×40.0 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 4 ms
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: 4 µs
Refresh Rate: 560 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.96–1.39 W
Weight: 0.69 oz19.5 g
Size Class: Mini
Diameter: —
Dimensions: 1.24×0.47×1.26 in 31.5×12.0×32.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.70 W
Weight: 0.34 oz9.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.89×0.39×0.93 in 22.5×10.0×23.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–5 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 3.84–7.58 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.77 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 8.4–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–60°C14.0–140.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 150 mm5.91 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 4.69–8.90 W
Weight: 2.79 oz79.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.77 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 12 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 4.43–6.75 W
Weight: 2.75 oz77.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.77 in 40.0×20.0×45.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Titanium
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 8 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.46–0.71 W
Weight: 0.63 oz18.0 g
Size Class: Mini
Diameter: —
Dimensions: 0.90×0.48×1.12 in 22.9×12.2×28.4 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.54–0.68 W
Weight: 0.32 oz9.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.88×0.49×0.91 in 22.4×12.5×23.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.22–0.29 W
Weight: 0.09 oz2.5 g
Size Class: Micro
Diameter: —
Dimensions: 0.77×0.32×0.64 in 19.6×8.2×16.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.50 W
Weight: 0.57 oz16.2 g
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.55–0.75 W
Weight: 0.92 oz26.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.22×0.63×1.22 in 31.0×16.0×31.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.32–0.54 W
Weight: 0.40 oz11.4 g
Size Class: Micro
Diameter: —
Dimensions: 0.96×0.45×0.91 in 24.5×11.5×23.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.84–1.26 W
Weight: 0.79 oz22.5 g
Size Class: Mini
Diameter: —
Dimensions: 1.14×0.51×1.18 in 29.0×13.0×30.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 200 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.71–2.20 W
Weight: 1.55 oz44.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.61×0.80×1.16 in 41.0×20.3×29.5 mm
Case Material: (add)
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 1.49–2.32 W
Weight: 1.06 oz30.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.38 in 30.0×9.9×35.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.40–3.39 W
Weight: 1.06 oz30.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.18×0.39×1.38 in 30.0×10.0×35.0 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 2.39 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.46 in 40.0×20.0×37.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.5–7.2 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: —
Weight: 0.92 oz26.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.42×0.59×1.30 in 36.0×15.0×33.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.16–0.31 W
Weight: 0.20 oz5.6 g
Size Class: Micro
Diameter: —
Dimensions: 0.78×0.32×0.83 in 19.8×8.2×21.2 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.75–0.82 W
Weight: 0.46 oz13.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.91×0.47×0.98 in 23.0×12.0×25.0 mm
Case Material: (add)
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 2 ms
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.46–0.71 W
Weight: 0.47 oz13.4 g
Size Class: Mini
Diameter: —
Dimensions: 0.90×0.48×1.12 in 22.8×12.2×28.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 21
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: 60°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: 1 µs
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: ≤55°C≤131.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 250 mm9.84 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Turnigy
Stall Current: (add)
Shaft Power: 0.66–1.05 W
Weight: 0.92 oz26.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.42×0.60×1.13 in 36.0×15.2×28.7 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.