Discover XQ-Power Servos in Our eBay Store!

Shop Now
TowerPro SG-50
Micro

TowerPro SG-50

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-10-27
Identity
Brand TowerPro
Product Number SG-50
Category Hobby
Performance
Torque
4.8V8.33 oz-inBottom 10%
Speed
6.0V 0.08 sec/60°
4.8V 0.10 sec/60° Above Average
Physical
Weight 0.18 ozTop 10%
Dimensions L 0.846 in
W 0.461 in
H 0.988 in
Drivetrain
Motor Type Coreless
Gears Nylon
Gear Spline/Teeth 21 T estimate
Rotation/Support Bushing
Control & Signal
Modulation Digital
Pulse Cycle 20 ms
Dead Band 1 µs
Control System PWM
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature 0–55 °C
Certification CE | ROHS
Connectivity
Connector JR (Universal)
Wire Length 150 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBottom 10%
Stronger than 5% of 363 Digital Micro servos at 4.8V
SpeedAbove Average
Faster than 68% of 361 Digital Micro servos at 4.8V
WeightTop 10%
Lighter than 91% of 665 Digital Micro servos

Performance Analysis

Shaft Power 0.15 W
Power Density0.400 W/in³
More power-dense than 1% of 625 Digital Micro servos
Torque Density1.6660 oz-in/g
Stronger than 15% of 363 Digital Micro servos
Torque-to-Volume Ratio21.62 oz-in/in³
Denser torque than 2% of 359 Digital Micro servos
Speed-to-Weight2.00000 (1/sec·g)
Faster than 93% of 361 Digital Micro servos
Speed-Torque Trade-off0.83
Better balanced than 5% of 358 Digital Micro servos
Speed Gain per Volt20.83%/V
More voltage-responsive (speed) than 66% of 305 Digital Micro servos
Voltage Range Width1.2 V
Wider voltage range than 34% of 553 Digital Micro servos

Similar Active Servos

Reviews (2)

  • no name

    January 28, 2014

    Application(s): kinematics control

    Comments: Few weeks ago i bought 3 of these, for some reason one has a range of 180deg and the other two only 170deg. I suspect they are not all assembled with the same accuracy.

    For my purpose these servos where ok (cheap and good usable)

    Though next time I'll try the metal version.

    The good servo sounds smoother then the other two.

  • pegas

    September 14, 2012

    Application(s): just for tests

    Comments: actual weight (with cable): 6.78g
    full motion: +/-54 degrees
    centering: +/-0.25 degrees
    trim step: ~0.5 degrees

Submit a review of TowerPro SG-50