Discover XQ-Power Servos in Our eBay Store!

Shop Now
TowerPro MG92B
Mini

TowerPro MG92B

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-09-04
Identity
Brand TowerPro
Product Number MG92B
Category Hobby
Performance
Torque
6.0V 48.61 oz-in
5.0V 43.05 oz-in
Speed
6.0V 0.08 sec/60°
5.0V 0.13 sec/60°
Running Current (add)
Stall Current ≤0.85 A
Shaft Power 0.61–1.12 W
Physical
Weight 0.49 oz
Dimensions L 0.90 in
W 0.47 in
H 1.22 in
Case Material Aluminum / Plastic
Drivetrain
Motor Type (add)
Motor Drive (add)
Gears Aluminum
Gear Spline/Teeth 25 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Backlash (add)
Control & Signal
Modulation Digital
Direction (add)
Rotational Range 160°
Mechanical Limit 160°
Pulse Cycle 1 ms
Pulse Width 500-2400 µs
Neutral Position 1500 µs
Dead Band 1 µs
Refresh Rate (add)
Angle Sensor (add)
Control System PWM
Programmable No
Signal Voltage (add)
Electrical & Environment
Operating Voltage 5–6.6 V
Power Source (add)
Regulator Type (add)
Temperature 0–55 °C
Water Rating (add)
Certification CE | ROHS
Idle Current (add)
Connectivity
Connector JR (Universal)
Wire Length 250 mm
Origin
Country of Origin Taiwan

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Notes

This servo also comes in a 360° continuous version.

Similar Active Servos

Reviews (1)

  • CGEE

    October 19, 2016

    Application(s): 48" 3d planes

    Comments: I have these on 3 planes so far, 48" extreme flight and wattaplane 3d planes. I use esc that puts out 6v, these servos are very fast and strong, the specs are higher than hitec hs65mg at 25% of the cost- no brainer.

Submit a review of TowerPro MG92B