Savöx SH0257MG

Search Amazon Search eBay

Compatible Hardware

Amazon eBay

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-26

Identity
Brand
Product Number	4710006990224
Category	Hobby
Discontinued	Yes
Performance
Torque	6.0V 30.60 oz-in 4.8V 25.00 oz-in Average
Speed	6.0V 0.09 sec/60° 4.8V 0.13 sec/60° Below Average
Running Current	6.0V 0.180 A 4.8V 0.150 A Average
Stall Current	1–1.2 AAverage
Physical
Weight	0.49 ozBelow Average
Dimensions	L 0.898 in W 0.472 in H 1.00 in
Case Material	Aluminum
Drivetrain
Motor Type	Brushed
Gears	Steel
Gear Spline/Teeth	21 T
Rotation Mode	Positional
Rotation/Support	Single Bearing
Control & Signal
Modulation	Digital
Direction	Clockwise
Rotational Range	90°
Mechanical Limit	220°
Pulse Width	700-2300 µs
Neutral Position	1500 µs
Dead Band	5 µs
Refresh Rate	333 Hz
Control System	PWM
Electrical & Environment
Operating Voltage	4.8–6 V
Idle Current	0.005 A
Connectivity
Connector	JR (Universal)
Wire Length	250 mm

Submit Missing Data Report an Error

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Compatible Hardware

Amazon eBay

*Based on known specs.

Class Comparison

Torque	Average Stronger than 42% of 349 Digital Micro servos at 4.8V
Speed	Below Average Faster than 31% of 347 Digital Micro servos at 4.8V
Weight	Below Average Lighter than 31% of 597 Digital Micro servos
Running Current	Average Lower draw than 56% of 60 Digital Micro servos at 4.8V
Stall Current	Average Lower draw than 43% of 188 Digital Micro servos

Performance Analysis

Shaft Power	0.36–0.63 W
Power Density	1.483 W/in³ More power-dense than 39% of 563 Digital Micro servos
Torque Density	1.7857 oz-in/g Stronger than 18% of 349 Digital Micro servos
Torque-to-Volume Ratio	58.96 oz-in/in³ Denser torque than 31% of 345 Digital Micro servos
Speed-to-Weight	0.54945 (1/sec·g) Faster than 27% of 347 Digital Micro servos
Speed-Torque Trade-off	3.25 Better balanced than 49% of 345 Digital Micro servos
Current-per-Torque Ratio	0.0480 A/oz-in More efficient than 31% of 98 Digital Micro servos
Idle-to-Running Current Ratio	0.033 Lower idle draw than 59% of 42 Digital Micro servos
No-Load vs Stall Current Spread	8.00 Narrower current spread than 45% of 45 Digital Micro servos
Torque Gain per Volt	18.67%/V More voltage-responsive (torque) than 63% of 290 Digital Micro servos
Speed Gain per Volt	37.05%/V More voltage-responsive (speed) than 98% of 295 Digital Micro servos
Voltage Range Width	1.2 V Wider voltage range than 25% of 496 Digital Micro servos
Dead-Band-to-Pulse-Width Ratio	0.0031 Finer dead band than 11% of 182 Digital Micro servos