Reely S3003-MG

Search Amazon Search eBay

Compatible Hardware

Amazon eBay

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-23

Identity
Brand
Product Number	2234101-62
Category	Hobby
Performance
Torque	7.4V 62.49 oz-in 6.0V 55.55 oz-in Below Average
Speed	7.4V 0.13 sec/60° 6.0V 0.15 sec/60° Above Average
Running Current	7.4V 0.300 A 6.0V 0.200 A Average
Stall Current	1.3–1.5 AAverage
Physical
Weight	1.83 ozAverage
Dimensions	L 1.594 in W 0.787 in H 1.496 in
Case Material	Metal
Drivetrain
Motor Type	Cored
Gears	Metal
Gear Spline/Teeth	25 T
Rotation/Support	Dual Bearings
Control & Signal
Modulation	Analog
Direction	Counterclockwise
Rotational Range	90°
Pulse Width	1000-2000 µs
Neutral Position	1500 µs
Dead Band	4 µs
Control System	PWM
Electrical & Environment
Operating Voltage	6–7.4 V
Temperature	-10–50 °C
Idle Current	0.020 A
Connectivity
Connector	JR (Universal)
Wire Length	300 mm
Origin
Country of Origin	Germany

Submit Missing Data Report an Error

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Compatible Hardware

Amazon eBay

*Based on known specs.

Class Comparison

Torque	Below Average Stronger than 34% of 198 Analog Standard servos at 6.0V
Speed	Above Average Faster than 79% of 195 Analog Standard servos at 6.0V
Weight	Average Lighter than 36% of 447 Analog Standard servos
Running Current	Average Lower draw than 46% of 49 Analog Standard servos at 6.0V
Stall Current	Average Lower draw than 47% of 63 Analog Standard servos

Performance Analysis

Shaft Power	0.68–0.89 W
Power Density	0.474 W/in³ More power-dense than 38% of 432 Analog Standard servos
Torque Density	1.0683 oz-in/g Stronger than 19% of 198 Analog Standard servos
Torque-to-Volume Ratio	29.60 oz-in/in³ Denser torque than 30% of 198 Analog Standard servos
Speed-to-Weight	0.12821 (1/sec·g) Faster than 72% of 195 Analog Standard servos
Speed-Torque Trade-off	8.33 Better balanced than 19% of 195 Analog Standard servos
Current-per-Torque Ratio	0.0270 A/oz-in More efficient than 11% of 54 Analog Standard servos
Idle-to-Running Current Ratio	0.100 Lower idle draw than 14% of 38 Analog Standard servos
No-Load vs Stall Current Spread	7.50 Narrower current spread than 38% of 35 Analog Standard servos
Torque Gain per Volt	8.92%/V More voltage-responsive (torque) than 24% of 156 Analog Standard servos
Speed Gain per Volt	10.98%/V More voltage-responsive (speed) than 27% of 156 Analog Standard servos
Voltage Range Width	1.4 V Wider voltage range than 79% of 239 Analog Standard servos
Dead-Band-to-Pulse-Width Ratio	0.0040 Finer dead band than 56% of 56 Analog Standard servos