Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-10
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Category | Hobby |
| Performance | |
| Torque |
6.0V
208.31 oz-in
15.00 kg-cm
1.5 N-m
4.8V
180.54 oz-in
13.00 kg-cm
1.3 N-m
Top 10%
|
| Speed |
6.0V
0.13 sec/60°
461.5 deg/s
76.9 RPM
4.8V
0.17 sec/60°
352.9 deg/s
58.8 RPM
Average
|
| Physical | |
| Weight | 2.79 oz79.0 gBottom 10% |
| Dimensions |
L 1.57 in W 0.75 in H 1.69 in L 39.9 mm W 19.0 mm H 42.9 mm |
| Drivetrain | |
| Motor Type | Coreless |
| Gears | Metal |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Analog |
| Control System | PWM |
| Electrical & Environment | |
| Operating Voltage | 4.8–7.2 V |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Top 10% Stronger than 91% of 198 Analog Standard servos at 4.8V |
| Speed | Average Faster than 62% of 195 Analog Standard servos at 4.8V |
| Weight | Bottom 10% Lighter than 0% of 447 Analog Standard servos |
Performance Analysis
| Shaft Power | 1.96–2.96 W |
| Power Density | 1.489 W/in³ More power-dense than 94% of 432 Analog Standard servos |
| Torque Density | 2.2853 oz-in/g Stronger than 77% of 198 Analog Standard servos |
| Torque-to-Volume Ratio | 90.72 oz-in/in³ Denser torque than 92% of 198 Analog Standard servos |
| Speed-to-Weight | 0.07446 (1/sec·g) Faster than 8% of 195 Analog Standard servos |
| Speed-Torque Trade-off | 30.70 Better balanced than 86% of 195 Analog Standard servos |
| Voltage Range Width | 2.4 V Wider voltage range than 93% of 239 Analog Standard servos |
Similar Active Servos
Reviews (1)
Includes 1 review aggregated from around the web.
There are few reviews for this servo on the web. Reddit users report erratic or strange behavior when controlling MG995 servos from ESP32 and Arduino boards, with many such problems traced to power supply and grounding setups.
Be the first to review!