Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-23| Identity | |
| Brand |  |
| Product Number | 900-00008 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
38.00 oz-in
2.74 kg-cm
0.3 N-m
4.8V
30.00 oz-in
2.16 kg-cm
0.2 N-m
|
| Speed |
6.0V
0.20 sec/60°
300.0 deg/s
50.0 RPM
4.8V
0.25 sec/60°
240.0 deg/s
40.0 RPM
|
| Running Current |
6.0V0.140 A140 mA |
| Stall Current | 15–0.2 A15000–200 mATop 10% |
| Physical | |
| Weight | 1.50 oz42.5 gAbove Average |
| Dimensions |
L 2.20 in W 0.80 in H 1.60 in L 55.9 mm W 20.3 mm H 40.6 mm |
| Drivetrain | |
| Gears | Plastic |
| Gear Spline/Teeth | 25 T |
| Rotation Mode | Continuous |
| Control & Signal | |
| Direction | Bidirectional |
| Mechanical Limit | No Limit |
| Pulse Cycle | 20 ms |
| Pulse Width | 1300-1700 µs |
| Neutral Position | 1500 µs |
| Control System | PWM |
| Electrical & Environment | |
| Operating Voltage | 4–6 V |
| Temperature | -10–50 °C14–122 °F |
| Certification | RoHS |
| Idle Current | 0.015 A15 mA |
| Origin | |
| Country of Origin | USA |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Weight | Above Average Lighter than 90% of 2491 Standard servos |
| Stall Current | Top 10% Lower draw than 100% of 648 Standard servos |
Performance Analysis
| Shaft Power | 0.22–0.35 W |
| Power Density | 0.125 W/in³ More power-dense than 0% of 2363 Standard servos |
| Torque Density | 0.7059 oz-in/g |
| Torque-to-Volume Ratio | 10.65 oz-in/in³ |
| Speed-to-Weight | 0.09412 (1/sec·g) |
| Speed-Torque Trade-off | 7.50 |
| Current-per-Torque Ratio | 0.0067 A/oz-in |
| Idle-to-Running Current Ratio | 0.107 |
| No-Load vs Stall Current Spread | 1.43 |
| Voltage Range Width | 2.0 V Wider voltage range than 48% of 1867 Standard servos |
Similar Active Servos
Reviews (2)
Includes 2 reviews aggregated from around the web.
There are few reviews for this servo on the web. Amazon buyers say it works as it should, with a zero point that stays stable through temperature changes, and several short positive comments. One buyer found it a tad slow and the shaft hard to adapt to non-matching parts. A hobbyist on a forum had a buzzing, barely-moving servo after powering it at 6V from a regulator circuit, which was a power-setup question rather than a verdict.
Be the first to review!