Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-28Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | (add) |
| Category | Hobby |
| Performance | |
| Torque |
5.0V
44.70 oz-in
3.22 kg-cm
0.3 N-m
4.8V
43.10 oz-in
3.10 kg-cm
0.3 N-m
|
| Speed |
5.0V
0.12 sec/60°
500.0 deg/s
83.3 RPM
4.8V
0.12 sec/60°
500.0 deg/s
83.3 RPM
|
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 0.66–0.69 W |
| Physical | |
| Weight | 0.34 oz9.5 g |
| Dimensions |
L 0.89 in W 0.39 in H 0.93 in L 22.6 mm W 9.9 mm H 23.6 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | Coreless |
| Motor Drive | (add) |
| Gears | Metal |
| Gear Spline/Teeth | 25 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | Dual Bearings |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Digital |
| Direction | (add) |
| Rotational Range | 60° |
| Mechanical Limit | (add) |
| Pulse Cycle | (add) |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | JR (Universal) estimate |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (2)
-
Bob Lee
April 18, 2011Application(s): Collective 450 heli
Comments: Bought 3 from HK, tested them before fitment, 1 failed and the other 2 were fine. All had quality control tags on them. Who will trust a servo like this. NOT ME ! Would have crashed my heli if I had used them.
chamlo
January 7, 2011Application(s): Rudder & Elevator on 25oz 3D plane
Comments: Attempted installation on a 25oz 3D plane tail. Servos would flutter the control surfaces violently trying to hold a position. Apparently control surfaces of a certain size (large) are a problem for this servo. Will attemp an application on a plane with smaller control surfaces.