Discover XQ-Power Servos in Our eBay Store!

Shop Now
KST CM3510MG
Standard

KST CM3510MG

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-23
Identity
Brand KST
Product Number KST-2401
Category Hobby
Performance
Torque
8.4V 485.80 oz-in
7.4V 416.40 oz-in
6.0V 347.00 oz-in
4.8V 277.60 oz-in Average
Speed
8.4V 0.10 sec/60°
7.4V 0.13 sec/60°
6.0V 0.15 sec/60°
4.8V 0.20 sec/60° Below Average
Stall Current 2.1–3.65 AAverage
Physical
Weight 2.47 ozBelow Average
Dimensions L 1.591 in
W 0.787 in
H 1.496 in
Case Material Aluminum
Drivetrain
Motor Type Coreless
Gears Steel
Gear Spline/Teeth 25 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Rotational Range 100°
Pulse Cycle 3.003 ms
Pulse Width 900-2100 µs
Neutral Position 1520 µs
Refresh Rate 333 Hz
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Electrical & Environment
Operating Voltage 4.8–8.4 V
Temperature -10–65 °C
Water Rating IP65
Connectivity
Connector JR (Universal) estimate
Origin
Country of Origin China

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAverage
Stronger than 62% of 1060 Digital Standard servos at 4.8V
SpeedBelow Average
Faster than 10% of 1045 Digital Standard servos at 4.8V
WeightBelow Average
Lighter than 35% of 1880 Digital Standard servos
Stall CurrentAverage
Lower draw than 41% of 570 Digital Standard servos

Performance Analysis

Shaft Power 2.57–8.98 W
Power Density4.794 W/in³
More power-dense than 77% of 1768 Digital Standard servos
Torque Density3.9657 oz-in/g
Stronger than 60% of 1053 Digital Standard servos
Torque-to-Volume Ratio148.15 oz-in/in³
Denser torque than 64% of 1058 Digital Standard servos
Speed-to-Weight0.07143 (1/sec·g)
Faster than 8% of 1038 Digital Standard servos
Speed-Torque Trade-off55.52
Better balanced than 82% of 1034 Digital Standard servos
Current-per-Torque Ratio0.0131 A/oz-in
More efficient than 58% of 331 Digital Standard servos
Torque Gain per Volt20.83%/V
More voltage-responsive (torque) than 83% of 873 Digital Standard servos
Speed Gain per Volt27.78%/V
More voltage-responsive (speed) than 97% of 874 Digital Standard servos
Voltage Range Width3.6 V
Wider voltage range than 84% of 1560 Digital Standard servos

Similar Active Servos

Reviews of KST CM3510MG

Be the first to review!

Submit a review of KST CM3510MG