JR DS8911HV

Search Amazon Search eBay

Compatible Hardware

Amazon eBay

*Based on known specs.

Technical Specifications

Last Updated: 2026-07-10

Identity

Brand Product Number Category

Performance

Torque Speed Stall Current Output Power Radial Load Running Current Shaft Power

Physical

Weight Dimensions Shape Shaft Size Case Material

Drivetrain

Motor Type Motor Drive Gears Gear Ratio Gear Spline/Teeth Rotation/Support Rotation Mode Backlash

Control & Signal

Modulation Direction Rotational Range Mechanical Limit Pulse Cycle Pulse Width Neutral Position Dead Band Refresh Rate Angle Sensor Control System Programmable Resolution MCU Operating Modes Signal Voltage

Electrical & Environment

Operating Voltage Power Source Regulator Type Temperature Water Rating Certification Idle Current

Connectivity

Connector Wire Length Baud Rate

Origin

Country of Origin

Preferences are saved automatically.

Weight

Dimensions

Torque

Speed

Current

Temp

Wire

Identity
Brand
Product Number	JRPS8911HV
Category	Hobby
Discontinued	Yes
Performance
Torque	7.4V470.00 oz-in
Speed	7.4V0.12 sec/60°
Running Current	(add)
Stall Current	(add)
Shaft Power	7.24 W
Physical
Weight	2.50 oz
Dimensions	L 1.58 in W 0.82 in H 1.56 in
Case Material	(add)
Drivetrain
Motor Type	Coreless
Motor Drive	(add)
Gears	Metal
Gear Spline/Teeth	(add)
Rotation Mode	(add)
Rotation/Support	Dual Bearings
Backlash	(add)
Control & Signal
Modulation	Digital
Direction	(add)
Rotational Range	180°
Mechanical Limit	(add)
Pulse Cycle	50 ms
Pulse Width	800-2200 µs
Neutral Position	(add)
Dead Band	1 µs
Refresh Rate	(add)
Angle Sensor	(add)
Control System	PWM
Programmable	(add)
Signal Voltage	(add)
Electrical & Environment
Operating Voltage	7.4–7.4 V
Power Source	(add)
Regulator Type	(add)
Temperature	(add)
Water Rating	(add)
Certification	(add)
Idle Current	(add)
Connectivity
Connector	JR (Universal)
Wire Length	(add)
Origin
Country of Origin	(add)

MORE SPECS

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.