Discover XQ-Power Servos in Our eBay Store!

Shop Now
J&T Bearing 600.08
Unknown

J&T Bearing 600.08

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-07-10
Identity
Brand J&T Bearing
Product Number JT600.08
Category Hobby
Performance
Torque
8.4V 600.00 oz-in
7.4V 542.00 oz-in
6.0V 472.00 oz-in
Speed
8.4V 0.08 sec/60°
7.4V 0.09 sec/60°
6.0V 0.10 sec/60°
Running Current (add)
Stall Current (add)
Physical
Weight 2.93 oz
Dimensions (add)
Case Material (add)
Drivetrain
Motor Type Brushless
Motor Drive (add)
Gears Stainless Steel
Gear Spline/Teeth (add)
Shaft Size (add)
Rotation Mode (add)
Rotation/Support (add)
Backlash (add)
Control & Signal
Modulation (add)
Direction (add)
Rotational Range (add)
Mechanical Limit (add)
Pulse Cycle (add)
Pulse Width (add)
Neutral Position 1520 µs
Dead Band (add)
Refresh Rate 333 Hz
Angle Sensor (add)
Control System (add)
Programmable (add)
Signal Voltage (add)
Electrical & Environment
Operating Voltage 6–8.4 V
Power Source (add)
Regulator Type (add)
Temperature -15–70 °C
Water Rating IP67
Certification (add)
Idle Current (add)
Connectivity
Connector (add)
Wire Length (add)
Origin
Country of Origin USA

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Performance Analysis

Shaft Power 8.73–13.87 W
Torque Density5.6868 oz-in/g
4th-highest torque density of 24 Unknown servos
Speed-to-Weight0.12048 (1/sec·g)
Faster than 36% of the 26 Unknown servos in the database
Speed-Torque Trade-off47.20
Better balanced than 73% of the 31 Unknown servos in the database
Torque Gain per Volt11.30%/V
More voltage-responsive (torque) than 23% of the 23 Unknown servos in the database
Speed Gain per Volt10.42%/V
More voltage-responsive (speed) than 25% of the 25 Unknown servos in the database
Voltage Range Width2.4 V
Wider voltage range than 48% of the 63 Unknown servos in the database

Similar Active Servos

Reviews of J&T Bearing 600.08

Be the first to review!

Submit a review of J&T Bearing 600.08