Discover XQ-Power Servos in Our eBay Store!

Shop Now
INO-Lab HG-D202MG
Micro Discontinued

INO-Lab HG-D202MG

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-07-28
Identity
Brand INO-Lab
Product Number (add)
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 36.10 oz-in
4.8V 27.80 oz-in
Speed
6.0V 0.14 sec/60°
4.8V 0.16 sec/60°
Running Current (add)
Stall Current (add)
Shaft Power 0.32–0.48 W
Physical
Weight 0.34 oz
Dimensions L 0.91 in
W 0.45 in
H 0.98 in
Case Material (add)
Drivetrain
Motor Type (add)
Motor Drive (add)
Gears Metal
Gear Spline/Teeth (add)
Rotation Mode (add)
Rotation/Support Dual Bearings
Backlash (add)
Control & Signal
Modulation Digital
Direction (add)
Rotational Range (add)
Mechanical Limit (add)
Pulse Cycle (add)
Pulse Width (add)
Neutral Position (add)
Dead Band (add)
Refresh Rate (add)
Angle Sensor (add)
Control System (add)
Programmable (add)
Signal Voltage (add)
Electrical & Environment
Operating Voltage (add)
Power Source (add)
Regulator Type (add)
Temperature (add)
Water Rating (add)
Certification (add)
Idle Current (add)
Connectivity
Connector JR (Universal) estimate
Wire Length (add)
Origin
Country of Origin (add)

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Similar Active Servos

Reviews (2)

  • David Wilcock

    September 9, 2016

    Application(s): 45" wingspan Sukhoi electric aerobatic plane, using approximately 5 volts provided by a voltage regulator.

    Comments: No failures, adequate power and exact positioning and centering.

  • Ivan

    May 22, 2012

    Application(s): Be carefull: it seems this servo doesn't support 6V current. I have them on 450 cyclic with 6v UBEC and two of them failed soon. The rest works OK. Also the only 4.8V is shown in specification on the packaging.

    Comments: Incorrect specofotation

Submit a review of INO-Lab HG-D202MG