Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-7965MG
Standard Discontinued

Hitec HS-7965MG

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-16
Identity
Brand Hitec
Product Number 37965S
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 139.00 oz-in
4.8V 111.00 oz-in Below Average
Speed
6.0V 0.10 sec/60°
4.8V 0.13 sec/60° Average
Running Current
4.8V0.400 ABelow Average
Stall Current 2.4–3 AAverage
Physical
Weight 2.19 ozAverage
Dimensions L 1.57 in
W 0.78 in
H 1.45 in
Drivetrain
Motor Type Coreless
Motor Drive FET
Gears Metal
Gear Spline/Teeth 24 T estimate
Shaft Size 5.8 mm
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 80°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 1 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -20–60 °C
Water Rating Water Resistant
Idle Current 0.009 A
Connectivity
Connector S
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 20% of 1060 Digital Standard servos at 4.8V
SpeedAverage
Faster than 59% of 1045 Digital Standard servos at 4.8V
WeightAverage
Lighter than 55% of 1880 Digital Standard servos
Running CurrentBelow Average
Lower draw than 25% of 226 Digital Standard servos at 4.8V
Stall CurrentAverage
Lower draw than 59% of 570 Digital Standard servos

Performance Analysis

Shaft Power 1.58–2.57 W
Power Density1.447 W/in³
More power-dense than 30% of 1768 Digital Standard servos
Torque Density1.7903 oz-in/g
Stronger than 17% of 1053 Digital Standard servos
Torque-to-Volume Ratio62.51 oz-in/in³
Denser torque than 22% of 1058 Digital Standard servos
Speed-to-Weight0.12407 (1/sec·g)
Faster than 57% of 1038 Digital Standard servos
Speed-Torque Trade-off14.43
Better balanced than 23% of 1034 Digital Standard servos
Current-per-Torque Ratio0.0270 A/oz-in
More efficient than 15% of 331 Digital Standard servos
Idle-to-Running Current Ratio0.023
Lower idle draw than 81% of 167 Digital Standard servos
No-Load vs Stall Current Spread7.50
Narrower current spread than 81% of 179 Digital Standard servos
Torque Gain per Volt21.02%/V
More voltage-responsive (torque) than 85% of 873 Digital Standard servos
Speed Gain per Volt25.01%/V
More voltage-responsive (speed) than 95% of 874 Digital Standard servos
Voltage Range Width1.2 V
Wider voltage range than 21% of 1560 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0008
Finer dead band than 90% of 504 Digital Standard servos

Similar Active Servos

Reviews of Hitec HS-7965MG

Be the first to review!

Submit a review of Hitec HS-7965MG