Discover XQ-Power Servos in Our eBay Store!

Shop Now
Mini

Hitec HS-7245MH

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-22
Identity
Brand Hitec
Product Number 37245S
Category Hobby
Performance
Torque
7.4V 89.00 oz-in
6.0V 72.00 oz-in
Speed
7.4V 0.11 sec/60°
6.0V 0.13 sec/60°
Running Current
7.4V 0.190 A
6.0V 0.150 A
Stall Current 1.3–1.6 AAverage
Physical
Weight 1.20 ozBelow Average
Dimensions L 1.28 in
W 0.66 in
H 1.29 in
Case Material Plastic
Drivetrain
Motor Type Coreless Brushed
Gears Metal
Gear Spline/Teeth 24 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Backlash 0.500°
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 175°
Mechanical Limit 121°
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 2 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 3.5–8.4 V
Temperature -20–60 °C
Water Rating IP4X
Idle Current 0.012 A
Connectivity
Connector JR (Universal)
Wire Length 240 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

WeightBelow Average
Lighter than 20% of 505 Digital Mini servos
Stall CurrentAverage
Lower draw than 57% of 94 Digital Mini servos

Performance Analysis

Shaft Power 1.02–1.50 W
Power Density1.373 W/in³
More power-dense than 37% of 482 Digital Mini servos
Torque Density2.1177 oz-in/g
Torque-to-Volume Ratio66.07 oz-in/in³
Speed-to-Weight0.22624 (1/sec·g)
Speed-Torque Trade-off9.36
Current-per-Torque Ratio0.0222 A/oz-in
Idle-to-Running Current Ratio0.080
No-Load vs Stall Current Spread10.67
Voltage Range Width4.9 V
4th-highest voltage range width of 405 Digital Mini servos
Backlash-to-Range Ratio0.00286
Tighter backlash than 86% of 43 Hitec servos
Dead-Band-to-Pulse-Width Ratio0.0017
Finer dead band than 53% of 104 Digital Mini servos

Similar Active Servos

Reviews (1)

Includes 1 review aggregated from around the web.

There are very few reviews for this servo on the web. One pattern-plane flyer reports using it for aileron duty on a 60 inch Extra with large control surfaces and calls the experience great. His one drawback is that the case is tall, so it does not fit narrow wings. No failures were reported.

Be the first to review!

Submit a review of Hitec HS-7245MH