Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-24
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | 36930S |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
7.4V
180.54 oz-in
13.00 kg-cm
1.3 N-m
6.0V
138.87 oz-in
10.00 kg-cm
1.0 N-m
4.8V
111.10 oz-in
8.00 kg-cm
0.8 N-m
Below Average
|
| Speed |
7.4V
0.07 sec/60°
857.1 deg/s
142.9 RPM
6.0V
0.09 sec/60°
705.9 deg/s
117.6 RPM
4.8V
0.11 sec/60°
571.4 deg/s
95.2 RPM
Above Average
|
| Running Current |
7.4V
0.500 A
500 mA
6.0V
0.400 A
400 mA
4.8V
0.300 A
300 mA
Average
|
| Stall Current | 3.2–5.2 A3200–5200 mABelow Average |
| Physical | |
| Weight | 2.33 oz66.0 gAverage |
| Dimensions |
L 1.57 in W 0.78 in H 1.46 in L 39.9 mm W 19.8 mm H 37.1 mm |
| Case Material | Plastic / Aluminum |
| Drivetrain | |
| Motor Type | Coreless Brushed |
| Motor Drive | MOS |
| Gears | Metal / Steel |
| Gear Spline/Teeth | 25 T |
| Rotation Mode | Positional |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Digital |
| Direction | Clockwise |
| Rotational Range | 151° |
| Pulse Width | 900-2100 µs |
| Neutral Position | 1500 µs |
| Dead Band | 1 µs |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Programmable | Yes |
| Signal Voltage | 3-5V |
| Electrical & Environment | |
| Operating Voltage | 4.8–7.4 V |
| Temperature | -20–60 °C-4–140 °F |
| Water Rating | Splashproof |
| Idle Current | 0.030 A30 mA |
| Connectivity | |
| Connector | JR (Universal) estimate |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Below Average Stronger than 21% of 1060 Digital Standard servos at 4.8V |
| Speed | Above Average Faster than 75% of 1045 Digital Standard servos at 4.8V |
| Weight | Average Lighter than 42% of 1880 Digital Standard servos |
| Running Current | Average Lower draw than 36% of 226 Digital Standard servos at 4.8V |
| Stall Current | Below Average Lower draw than 21% of 570 Digital Standard servos |
Performance Analysis
| Shaft Power | 1.96–4.77 W |
| Power Density | 2.667 W/in³ More power-dense than 55% of 1768 Digital Standard servos |
| Torque Density | 1.6833 oz-in/g Stronger than 14% of 1053 Digital Standard servos |
| Torque-to-Volume Ratio | 62.14 oz-in/in³ Denser torque than 21% of 1058 Digital Standard servos |
| Speed-to-Weight | 0.14430 (1/sec·g) Faster than 70% of 1038 Digital Standard servos |
| Speed-Torque Trade-off | 11.67 Better balanced than 16% of 1034 Digital Standard servos |
| Current-per-Torque Ratio | 0.0468 A/oz-in More efficient than 4% of 331 Digital Standard servos |
| Idle-to-Running Current Ratio | 0.100 Lower idle draw than 36% of 167 Digital Standard servos |
| No-Load vs Stall Current Spread | 17.33 Narrower current spread than 52% of 179 Digital Standard servos |
| Torque Gain per Volt | 24.04%/V More voltage-responsive (torque) than 91% of 873 Digital Standard servos |
| Speed Gain per Volt | 19.23%/V More voltage-responsive (speed) than 76% of 874 Digital Standard servos |
| Voltage Range Width | 2.6 V Wider voltage range than 66% of 1560 Digital Standard servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0008 Finer dead band than 88% of 504 Digital Standard servos |
Similar Active Servos
Reviews of Hitec D930SW
Be the first to review!