Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec D131MW
Slim

Hitec D131MW

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-10-23
Identity
Brand Hitec
Product Number 36131S
Category Hobby
Performance
Torque
7.4V 40.28 oz-in
6.0V 33.34 oz-in
4.8V 26.39 oz-in Bottom 10%
Speed
7.4V 0.11 sec/60°
6.0V 0.14 sec/60°
4.8V 0.17 sec/60° Below Average
Running Current
7.4V 0.110 A
6.0V 0.090 A
4.8V 0.075 A
Stall Current 0.7–0.9 AAbove Average
Physical
Weight 0.35 ozTop 10%
Dimensions L 0.87 in
W 0.34 in
H 0.91 in
Case Material Aluminum
Drivetrain
Motor Type Coreless
Gears Metal
Gear Spline/Teeth 25 T
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Rotational Range 175°
Dead Band 2 µs
Angle Sensor Potentiometer
Control System TTL / PWM
Programmable Yes
Electrical & Environment
Operating Voltage 4.8–7.4 V
Power Source 2S LiPo
Water Rating IP4X
Idle Current 0.030 A
Connectivity
Connector JR (Universal) estimate

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBottom 10%
Stronger than 0% of 40 Digital Slim servos at 4.8V
SpeedBelow Average
Faster than 23% of 41 Digital Slim servos at 4.8V
WeightTop 10%
Lighter than 93% of 83 Digital Slim servos
Stall CurrentAbove Average
Lower draw than 86% of 29 Digital Slim servos

Performance Analysis

Shaft Power 0.29–0.68 W
Power Density2.515 W/in³
More power-dense than 39% of 83 Digital Slim servos
Torque Density2.6929 oz-in/g
Stronger than 38% of 40 Digital Slim servos
Torque-to-Volume Ratio98.04 oz-in/in³
Denser torque than 23% of 40 Digital Slim servos
Speed-to-Weight0.60024 (1/sec·g)
Faster than 88% of 41 Digital Slim servos
Speed-Torque Trade-off4.49
Better balanced than 8% of 40 Digital Slim servos
Current-per-Torque Ratio0.0341 A/oz-in
More efficient than 23% of 81 Hitec servos
Idle-to-Running Current Ratio0.400
Lower idle draw than 0% of 61 Hitec servos
No-Load vs Stall Current Spread12.00
Narrower current spread than 18% of 56 Hitec servos
Torque Gain per Volt20.24%/V
More voltage-responsive (torque) than 84% of 33 Digital Slim servos
Speed Gain per Volt20.99%/V
More voltage-responsive (speed) than 79% of 34 Digital Slim servos
Voltage Range Width2.6 V
Wider voltage range than 49% of 75 Digital Slim servos

Similar Active Servos

Reviews of Hitec D131MW

Be the first to review!

Submit a review of Hitec D131MW