Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-28Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand | ![]() |
| Product Number | FUTM0415 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
4.8V39.00 oz-in2.81 kg-cm0.3 N-m |
| Speed |
4.8V0.15 sec/60°400.0 deg/s66.7 RPM |
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 0.48 W |
| Physical | |
| Weight | 0.60 oz17.0 g |
| Dimensions |
L 1.10 in W 0.51 in H 1.18 in L 27.9 mm W 13.0 mm H 30.0 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | (add) |
| Motor Drive | (add) |
| Gears | Plastic |
| Gear Spline/Teeth | 21 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | (add) |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Analog |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | (add) |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | (add) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (2)
-
SlayerDan
August 2, 2011Application(s): 2 Great Planes Edge 540T EP all 4 servos on each plane
Comments: out of 8 servos 3 of them were bad right out of the box. 2 of them never even got install on the first plane. The next 2 servos bought for this plane did work. On the second plane all servos were installed and working. During the pre-flight checklist at the field I found that the right aileron servo had a bad tooth at the middle of the throw. I do not know how long they last but from what I can see so far I am not happy. The 2 planes were built almost a year apart. I would have used a different servo but because Great Planes requires the torque and size of this servo I am stuck.
Gavin
August 11, 2010Application(s): I fly them in a 4 foot span 3D model, electric powered using an AXI 2820/10 achieving 200 Watts per pound!
Comments: Robust and reliable servos that have flown solid for 3 1/2 years. One servo had a pot go bad, but was still working. They are good, but could be a little faster. Excellent value for money.
