Discover XQ-Power Servos in Our eBay Store!

Shop Now
EMAX ES08MA 2
Micro

EMAX ES08MA 2

Compatible Hardware

*Based on known specs.

Technical Specifications

Last Updated: 2026-09-13
Identity
Brand EMAX
Product Number 0102003010
Category Hobby
Performance
Torque
6.0V 28.00 oz-in
4.8V 20.83 oz-in Above Average
Speed
6.0V 0.10 sec/60°
4.8V 0.12 sec/60° Average
Running Current
6.0V 0.250 A
4.8V 0.200 A Below Average
Stall Current 0.9–1.1 ABelow Average
Physical
Weight 0.42 ozBelow Average
Dimensions L 0.906 in
W 0.453 in
H 0.945 in
Case Material Plastic
Drivetrain
Motor Type Brushed
Gears Metal
Gear Spline/Teeth 15 T
Rotation Mode Positional
Rotation/Support Bushing
Control & Signal
Modulation Analog
Direction Counterclockwise
Rotational Range 95°
Mechanical Limit 360°
Pulse Width 600-2400 µs
Neutral Position 1500 µs
Dead Band 1 µs
Refresh Rate 333 Hz
Angle Sensor Potentiometer
Control System PWM
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -10–60 °C
Certification CE | ROHS
Idle Current 0.007 A
Connectivity
Connector JR (Universal)
Wire Length 250 mm
Origin
Country of Origin China

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAbove Average
Stronger than 67% of 131 Analog Micro servos at 4.8V
SpeedAverage
Faster than 48% of 130 Analog Micro servos at 4.8V
WeightBelow Average
Lighter than 11% of 335 Analog Micro servos
Running CurrentBelow Average
Lower draw than 34% of 33 Micro servos at 4.8V
Stall CurrentBelow Average
Lower draw than 24% of 38 Analog Micro servos

Performance Analysis

Shaft Power 0.32–0.52 W
Power Density1.335 W/in³
More power-dense than 86% of 320 Analog Micro servos
Torque Density1.7358 oz-in/g
Stronger than 20% of 131 Analog Micro servos
Torque-to-Volume Ratio53.71 oz-in/in³
Denser torque than 61% of 131 Analog Micro servos
Speed-to-Weight0.69444 (1/sec·g)
Faster than 16% of 130 Analog Micro servos
Speed-Torque Trade-off2.50
Better balanced than 67% of 130 Analog Micro servos
Current-per-Torque Ratio0.0528 A/oz-in
More efficient than 35% of 32 Analog Micro servos
Idle-to-Running Current Ratio0.035
Lower idle draw than 59% of 74 Hobby servos
No-Load vs Stall Current Spread5.50
Narrower current spread than 53% of 20 Micro servos
Torque Gain per Volt28.68%/V
More voltage-responsive (torque) than 93% of 72 Analog Micro servos
Speed Gain per Volt16.67%/V
More voltage-responsive (speed) than 61% of 71 Analog Micro servos
Voltage Range Width1.2 V
Wider voltage range than 45% of 137 Analog Micro servos
Dead-Band-to-Pulse-Width Ratio0.0006
1st-highest dead-band-to-pulse-width ratio of 28 Analog Micro servos

Notes

Specs are for the ES08MA 2 which is the newer version of the model. This servo also comes in a High Voltage version - ES08MA 2 HV - and a digital version - ES08MD 2.

Similar Active Servos

Reviews (2)

  • Raul

    July 11, 2016

    Application(s): DLG glider

    Comments: Theay are fast and strong, good centering for the price. for sport glider they are perfect.
    Better for the wing and rudder than the prof...

  • Felipe

    September 4, 2012

    Application(s): KDS 450 SV Cyclic Servos

    Comments: I'm using three of them on my heli's cyclic and as far as to now they perform smooth and well, even after a crash.

Submit a review of EMAX ES08MA 2