Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-28Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | (add) |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
28.00 oz-in
2.02 kg-cm
0.2 N-m
4.8V
22.00 oz-in
1.58 kg-cm
0.2 N-m
|
| Speed |
6.0V
0.11 sec/60°
545.5 deg/s
90.9 RPM
4.8V
0.13 sec/60°
461.5 deg/s
76.9 RPM
|
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 0.31–0.47 W |
| Physical | |
| Weight | 0.40 oz11.3 g |
| Dimensions |
L 0.97 in W 0.45 in H 0.91 in L 24.6 mm W 11.4 mm H 23.1 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | Brushed |
| Motor Drive | (add) |
| Gears | Metal |
| Gear Spline/Teeth | 25 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | Single Bearing |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Digital |
| Direction | (add) |
| Rotational Range | 120° |
| Mechanical Limit | (add) |
| Pulse Cycle | (add) |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (1)
-
distractor
December 13, 2011Application(s): Cyclic servos on a Trex 450 Sport
Comments: I am using these as cyclic on my 450 sport with BeastX.
They perform very well at 50hz and 1520us. Feel a bit faster than 0.11 sec at 6v and the gears are very cheap. Negative points for the grommet style mounting but definite positive points for the 25 tooth Futaba output spline. NO BUZZ either.