Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-10Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | HSD52001 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
34.70 oz-in
2.50 kg-cm
0.2 N-m
4.8V
26.40 oz-in
1.90 kg-cm
0.2 N-m
|
| Speed |
6.0V
0.07 sec/60°
857.1 deg/s
142.9 RPM
4.8V
0.09 sec/60°
666.7 deg/s
111.1 RPM
|
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 0.54–0.92 W |
| Physical | |
| Weight | 0.91 oz25.9 g |
| Dimensions |
L 1.43 in W 0.61 in H 1.19 in L 36.3 mm W 15.5 mm H 30.2 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | Coreless |
| Motor Drive | (add) |
| Gears | Plastic |
| Gear Spline/Teeth | (add) |
| Rotation Mode | (add) |
| Rotation/Support | (add) |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Digital |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | 3 ms |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | (add) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (2)
-
LasseK
October 3, 2015Application(s): Tail rotor servo for Align T-Rex 450 Pro FBL
Comments: Have 230 flights on it in my 450, so far without problems. It holds the tail very stable (I'm using an Align 3GX V3.0 as FBL controller). It has survived a number of bad crashes (did have to change gear set twice, but that's all). I have run it on 5.5V and 6V, it works well with both voltages.
rickmartin96
October 7, 2012Application(s): tail on 500 efl
Comments: this servo works pretty good, but does not like or function well with gov. set in esc. tried align and castle creations, tail will wag with either gov turned on, changed to ds650 and it is great now.