Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-08-04Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand |  |
| Product Number | ACE8117 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
4.8V22.20 oz-in1.60 kg-cm0.2 N-m |
| Speed |
4.8V0.10 sec/60°600.0 deg/s100.0 RPM |
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 0.41 W |
| Physical | |
| Weight | 0.32 oz9.0 g |
| Dimensions |
L 0.87 in W 0.45 in H 0.93 in L 22.1 mm W 11.4 mm H 23.6 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | (add) |
| Motor Drive | (add) |
| Gears | Metal |
| Gear Spline/Teeth | 25 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | Single Bearing |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Analog |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | (add) |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | JR (Universal) estimate |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (1)
-
Jeff
March 21, 2013Application(s): mini titan e325 2.4G SC cyclic servos they came with the rtf
Comments: The performance seems ok for basic flying. They are not durable at all it's always the top gear that the teeth strip the rest of the gears always seem ok but I change them all when I rebuild the servos. It doesn't take much I had know blade strikes or hard crash I was hovering a few inches off of my living room floor and the gear stripped a section of teeth some how.