Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| KST | MS3509 | Hobby |
7.4V 444.4 oz-in32.00 kg-cm3.1 N-m 6.0V 388.9 oz-in28.00 kg-cm2.7 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.75 oz78.0 g | 1.595×0.827×1.516 in 40.5×21.0×38.5 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 200° | (add) | (add) | 500–2500 µs | 1500 µs | (add) | (add) | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 4.79–5.87 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | 3.3–5.0V | ||
| KST | MS665 | Hobby |
8.4V 104.1 oz-in7.50 kg-cm0.7 N-m 7.4V 94.4 oz-in6.80 kg-cm0.7 N-m 6.0V 80.5 oz-in5.80 kg-cm0.6 N-m |
8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 7.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 2.43 oz69.0 g | 1.59×0.787×1.50 in 40.4×20.0×38.1 mm | — | Standard | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 560 Hz | Hall Effect | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 160 mm6.30 in | (add) | 2.98–4.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | MS825 | Hobby |
8.4V 485.8 oz-in34.98 kg-cm3.4 N-m 7.4V 416.4 oz-in29.98 kg-cm2.9 N-m 6.0V 347.0 oz-in24.99 kg-cm2.5 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.13 s/60°461.5 deg/s76.9 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.61 oz74.0 g | 1.591×0.787×1.496 in 40.4×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 200° | (add) | (add) | 500–2500 µs | 1520 µs | (add) | 333 Hz | Hall Effect | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | (add) | (add) | JR (Universal) | 330 mm12.99 in | China | 4.28–8.17 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5.0V | ||
| KST | SV3312-12 | Hobby |
13.0V 527.4 oz-in37.98 kg-cm3.7 N-m 12.0V 458.0 oz-in32.98 kg-cm3.2 N-m 8.4V 388.6 oz-in27.99 kg-cm2.7 N-m |
13.0V 0.10 s/60°600.0 deg/s100.0 RPM 12.0V 0.12 s/60°500.0 deg/s83.3 RPM 8.4V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.47 oz70.0 g | 1.591×0.787×1.496 in 40.4×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 120° | (add) | 3.003 ms | 1000–2000 µs | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 8–13 V | Direct | (add) | -20–65°C-4.0–149.0°F | (add) | (add) | JR (Universal) | (add) | China | 4.49–9.75 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | SV6010-12 | Hobby |
13.0V 971.6 oz-in69.96 kg-cm6.9 N-m 12.0V 832.8 oz-in59.97 kg-cm5.9 N-m 8.4V 694.0 oz-in49.97 kg-cm4.9 N-m |
13.0V 0.09 s/60°666.7 deg/s111.1 RPM 12.0V 0.10 s/60°600.0 deg/s100.0 RPM 8.4V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 2.65 oz75.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | 4-pole | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 200° | (add) | 3.003 ms | 1000–2000 µs | 1520 µs | (add) | 333 Hz | Hall Effect | PWM | Yes | 8–13 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | China | 9.87–19.96 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | SV905-12 | Hobby |
13.0V 236.0 oz-in16.99 kg-cm1.7 N-m 12.0V 222.1 oz-in15.99 kg-cm1.6 N-m 8.4V 180.4 oz-in12.99 kg-cm1.3 N-m |
13.0V 0.04 s/60°1,500.0 deg/s250.0 RPM 12.0V 0.05 s/60°1,333.3 deg/s222.2 RPM 8.4V 0.06 s/60°1,000.0 deg/s166.7 RPM |
(add) | 2.47 oz70.0 g | 1.591×0.787×1.496 in 40.4×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | 1.7857 ms | 450–1050 µs | 760 µs | (add) | 560 Hz | Potentiometer | PWM | Yes | 8–13 V | Direct | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 5.56–10.91 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | SV915-12 | Hobby |
13.0V 416.4 oz-in29.98 kg-cm2.9 N-m 12.0V 388.6 oz-in27.99 kg-cm2.7 N-m 8.4V 333.1 oz-in23.99 kg-cm2.4 N-m |
13.0V 0.07 s/60°857.1 deg/s142.9 RPM 12.0V 0.08 s/60°750.0 deg/s125.0 RPM 8.4V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.47 oz70.0 g | 1.591×0.787×1.496 in 40.4×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | 450–1050 µs | 760 µs | (add) | 560 Hz | Potentiometer | PWM | Yes | 8–13 V | Direct | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 6.16–11.00 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X20-1035 | Hobby |
8.4V 166.7 oz-in12.00 kg-cm1.2 N-m 7.4V 138.9 oz-in10.00 kg-cm1.0 N-m 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.54 oz72.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Mini | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | (add) | (add) | 1.7857 ms | 450–1050 µs | 760 µs | (add) | 560 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 5.78–10.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X20-12-M-835 | Hobby | 12.0V 666.2 oz-in47.97 kg-cm4.7 N-m | 12.0V 0.14 s/60°428.6 deg/s71.4 RPM | ≤3.25 A≤3250 mA | 2.82 oz80.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | 200° | (add) | 3.003 ms | 500–2500 µs | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 9–13 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 8.80 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X20-2208 | Hobby |
8.4V 347.0 oz-in24.99 kg-cm2.5 N-m 7.4V 305.4 oz-in21.99 kg-cm2.2 N-m 6.0V 249.8 oz-in17.99 kg-cm1.8 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.09 s/60°666.7 deg/s111.1 RPM |
(add) | 2.54 oz72.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | 100° | (add) | (add) | 900–2100 µs | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 5.13–9.17 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X20-3005 | Hobby |
8.4V 444.2 oz-in31.98 kg-cm3.1 N-m 7.4V 416.4 oz-in29.98 kg-cm2.9 N-m 6.0V 333.1 oz-in23.99 kg-cm2.4 N-m |
8.4V 0.05 s/60°1,276.6 deg/s212.8 RPM 7.4V 0.05 s/60°1,153.8 deg/s192.3 RPM 6.0V 0.07 s/60°895.5 deg/s149.3 RPM |
(add) | 2.47 oz70.0 g | 1.595×0.787×1.496 in 40.5×20.0×38.0 mm | — | Standard | Aluminum | 4-pole | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | 3.003 ms | (add) | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | IP65 | (add) | JR (Universal) | (add) | (add) | 9.19–17.47 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KST | X20-3012 * | Hobby |
8.4V 485.8 oz-in34.98 kg-cm3.4 N-m 7.4V 416.4 oz-in29.98 kg-cm2.9 N-m 6.0V 347.0 oz-in24.99 kg-cm2.5 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.54 oz72.0 g | 1.595×0.787×1.496 in 40.5×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | 100 | 3.003 ms | 900–2100 µs | 1500 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 4.28–8.17 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X20-4208 | Hobby |
8.4V 638.5 oz-in45.98 kg-cm4.5 N-m 7.4V 583.0 oz-in41.98 kg-cm4.1 N-m 6.0V 527.4 oz-in37.98 kg-cm3.7 N-m |
8.4V 0.07 s/60°857.1 deg/s142.9 RPM 7.4V 0.08 s/60°750.0 deg/s125.0 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
8.8–12.6 A8800–12600 mA | 2.82 oz80.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | 4-pole | (add) | Steel | 25 | 6 | Digital | (add) | 200° | (add) | 3.003 ms | 1000–2000 µs | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | IP65 | (add) | JR (Universal) | (add) | China | 9.75–16.87 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X20-7.4-M-805 | Hobby |
8.4V 166.6 oz-in11.99 kg-cm1.2 N-m 7.4V 152.7 oz-in10.99 kg-cm1.1 N-m 6.0V 124.9 oz-in9.00 kg-cm0.9 N-m |
8.4V 0.03 s/60°2,000.0 deg/s333.3 RPM 7.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 6.0V 0.04 s/60°1,500.0 deg/s250.0 RPM |
(add) | 2.65 oz75.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | (add) | 6 | Digital | (add) | (add) | (add) | 1.7857 ms | 450–1050 µs | 760 µs | (add) | 560 Hz | Hall Effect | PWM | Yes | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 5.77–10.27 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | 0.500° | 3.3–5V | ||
| KST | X20-7.4-M-820 | Hobby | 7.4V 416.4 oz-in29.98 kg-cm2.9 N-m | 7.4V 0.09 s/60°666.7 deg/s111.1 RPM | ≤4.95 A≤4950 mA | 2.65 oz75.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | 200° | (add) | 3.003 ms | 500–2500 µs | 1500 µs | (add) | 333 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 8.55 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5.0V | ||
| KST | X20-7.4-M-830 | Hobby | 7.4V 538.1 oz-in38.75 kg-cm3.8 N-m | 7.4V 0.13 s/60°461.5 deg/s76.9 RPM | ≤4.95 A≤4950 mA | 2.82 oz80.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | 200° | (add) | 3.003 ms | 500–2500 µs | 1500 µs | (add) | 333 Hz | Hall Effect | PWM | (add) | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 7.65 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| KST | X20-7.4-M-835 | Hobby | 7.4V 555.2 oz-in39.98 kg-cm3.9 N-m | 7.4V 0.13 s/60°461.5 deg/s76.9 RPM | ≤4.95 A≤4950 mA | 2.82 oz80.0 g | 1.575×0.787×1.575 in 40.0×20.0×40.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | 6 | Digital | (add) | 200° | 200 | 3.003 ms | 500–2500 µs | 1500 µs | (add) | 333 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | -10–65°C14.0–149.0°F | (add) | (add) | JR (Universal) | (add) | China | 7.90 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X20-7512 | Hobby |
8.4V 1,138.2 oz-in81.96 kg-cm8.0 N-m 7.4V 1,041.0 oz-in74.96 kg-cm7.4 N-m 6.0V 902.2 oz-in64.97 kg-cm6.4 N-m |
8.4V 0.11 s/60°545.5 deg/s90.9 RPM 7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
8.8–12.3 A8800–12300 mA | 2.47 oz70.0 g | 1.591×0.787×1.496 in 40.4×20.0×38.0 mm | — | Standard | Aluminum | 4-pole | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | 3.003 ms | 900–2100 µs | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | IP65 | (add) | JR (Universal) | (add) | (add) | 11.92–19.13 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| KST | X20-8.4-50 | Hobby |
8.4V 624.6 oz-in44.98 kg-cm4.4 N-m 7.4V 583.0 oz-in41.98 kg-cm4.1 N-m 6.0V 527.4 oz-in37.98 kg-cm3.7 N-m |
8.4V 0.15 s/60°400.0 deg/s66.7 RPM 7.4V 0.17 s/60°352.9 deg/s58.8 RPM 6.0V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 2.75 oz78.0 g | 1.595×0.827×1.654 in 40.5×21.0×42.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 100° | (add) | 3 ms | 900–2100 µs | 1520 µs | (add) | 333 Hz | Potentiometer | PWM | Yes | 6–8.4 V | (add) | (add) | -20–65°C-4.0–149.0°F | (add) | (add) | JR (Universal) | (add) | (add) | 4.88–7.70 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | 3.3–5V | ||
| Kyosho | KS4071-06W | Hobby |
6.0V 97.2 oz-in7.00 kg-cm0.7 N-m 5.0V 83.3 oz-in6.00 kg-cm0.6 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 5.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.12 oz60.0 g | 1.591×0.803×1.634 in 40.4×20.4×41.5 mm | — | Standard | (add) | (add) | (add) | (add) | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 5–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 220 mm8.66 in | Japan | 0.91–1.20 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kyosho | KS501SW * | Hobby | (add) | (add) | (add) | 5.02 oz142.4 g | 2.972×1.142×2.205 in 75.5×29.0×56.0 mm | — | Giant | (add) | (add) | (add) | Metal | (add) | (add) | (add) | (add) | 109° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | (add) | Japan | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kyosho | KS5031-09MW * | Hobby | 6.0V 125.0 oz-in9.00 kg-cm0.9 N-m | 6.0V 0.15 s/60°400.0 deg/s66.7 RPM | (add) | 2.03 oz57.5 g | 1.606×0.791×1.496 in 40.8×20.1×38.0 mm | — | Standard | Aluminum | (add) | (add) | Metal | 25 | (add) | (add) | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | Waterproof | (add) | (add) | (add) | (add) | 1.54 W | — | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Kyosho | KS5071-09MW | Hobby |
6.0V 138.9 oz-in10.00 kg-cm1.0 N-m 5.0V 125.0 oz-in9.00 kg-cm0.9 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 5.0V 0.17 s/60°352.9 deg/s58.8 RPM |
(add) | 2.12 oz60.0 g | 1.591×1.591×1.634 in 40.4×40.4×41.5 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 5–6 V | (add) | (add) | (add) | Waterproof | (add) | JR (Universal) | 220 mm8.66 in | (add) | 1.36–1.71 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Kyosho | KS9071-20SW * | Hobby | 6.0V 277.7 oz-in20.00 kg-cm2.0 N-m | 6.0V 0.21 s/60°285.7 deg/s47.6 RPM | (add) | 4.27 oz121.0 g | 2.382×1.209×2.362 in 60.5×30.7×60.0 mm | — | Giant | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Waterproof | (add) | (add) | (add) | (add) | 2.45 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Losi | S900S * | Hobby | 6.0V 416.7 oz-in30.01 kg-cm2.9 N-m | 6.0V 0.21 s/60°285.7 deg/s47.6 RPM | (add) | 7.05 oz200.0 g | 2.60×2.30×1.20 in 66.0×58.4×30.5 mm | — | Giant | Metal | Brushed | (add) | Metal | 15 | Dual Bearings | Digital | (add) | 120° | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | No | 6–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | USA | 3.67 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: KST
Stall Current: (add)
Shaft Power: 4.79–5.87 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.595×0.827×1.516 in 40.5×21.0×38.5 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 2.98–4.81 W
Weight: 2.43 oz69.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.787×1.50 in 40.4×20.0×38.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Hall Effect
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 160 mm6.30 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 4.28–8.17 W
Weight: 2.61 oz74.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.591×0.787×1.496 in 40.4×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Hall Effect
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 330 mm12.99 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 4.49–9.75 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.591×0.787×1.496 in 40.4×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 1000–2000 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 8–13 V
Power Source: Direct
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 9.87–19.96 W
Weight: 2.65 oz75.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 1000–2000 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Hall Effect
Control System: PWM
Programmable: Yes
Op. Voltage: 8–13 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.56–10.91 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.591×0.787×1.496 in 40.4×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 1.7857 ms
Pulse Width: 450–1050 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 8–13 V
Power Source: Direct
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 6.16–11.00 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.591×0.787×1.496 in 40.4×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 450–1050 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 8–13 V
Power Source: Direct
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.78–10.27 W
Weight: 2.54 oz72.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 1.7857 ms
Pulse Width: 450–1050 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: ≤3.25 A≤3250 mA
Shaft Power: 8.80 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 9–13 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.13–9.17 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 900–2100 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 9.19–17.47 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.595×0.787×1.496 in 40.5×20.0×38.0 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: IP65
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 4.28–8.17 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.595×0.787×1.496 in 40.5×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: 100
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: 8.8–12.6 A8800–12600 mA
Shaft Power: 9.75–16.87 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 1000–2000 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: IP65
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 5.77–10.27 W
Weight: 2.65 oz75.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: (add)
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: 1.7857 ms
Pulse Width: 450–1050 µs
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 560 Hz
Angle Sensor: Hall Effect
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: ≤4.95 A≤4950 mA
Shaft Power: 8.55 W
Weight: 2.65 oz75.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: ≤4.95 A≤4950 mA
Shaft Power: 7.65 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Hall Effect
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: ≤4.95 A≤4950 mA
Shaft Power: 7.90 W
Weight: 2.82 oz80.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.575 in 40.0×20.0×40.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: 6
Modulation: Digital
Direction: (add)
Op. Range: 200°
Mech. Limit: 200
Pulse Cycle: 3.003 ms
Pulse Width: 500–2500 µs
Neutral Pos.: 1500 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–65°C14.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: 8.8–12.3 A8800–12300 mA
Shaft Power: 11.92–19.13 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.591×0.787×1.496 in 40.4×20.0×38.0 mm
Case Material: Aluminum
Motor Type: 4-pole
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 3.003 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: IP65
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KST
Stall Current: (add)
Shaft Power: 4.88–7.70 W
Weight: 2.75 oz78.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.595×0.827×1.654 in 40.5×21.0×42.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 100°
Mech. Limit: (add)
Pulse Cycle: 3 ms
Pulse Width: 900–2100 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: Yes
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -20–65°C-4.0–149.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kyosho
Stall Current: (add)
Shaft Power: 0.91–1.20 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.591×0.803×1.634 in 40.4×20.4×41.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 220 mm8.66 in
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kyosho
Stall Current: (add)
Shaft Power: —
Weight: 5.02 oz142.4 g
Size Class: Giant
Diameter: —
Dimensions: 2.972×1.142×2.205 in 75.5×29.0×56.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: 109°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kyosho
Stall Current: (add)
Shaft Power: 1.54 W
Weight: 2.03 oz57.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.606×0.791×1.496 in 40.8×20.1×38.0 mm
Case Material: Aluminum
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kyosho
Stall Current: (add)
Shaft Power: 1.36–1.71 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.591×1.591×1.634 in 40.4×40.4×41.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 220 mm8.66 in
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Kyosho
Stall Current: (add)
Shaft Power: 2.45 W
Weight: 4.27 oz121.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.382×1.209×2.362 in 60.5×30.7×60.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Losi
Stall Current: (add)
Shaft Power: 3.67 W
Weight: 7.05 oz200.0 g
Size Class: Giant
Diameter: —
Dimensions: 2.60×2.30×1.20 in 66.0×58.4×30.5 mm
Case Material: Metal
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 120°
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: No
Op. Voltage: 6–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.