Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,573)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| KingMax Hobby | KM5513MD | Hobby |
6.0V 170.2 oz-in12.25 kg-cm1.2 N-m 4.8V 165.2 oz-in11.89 kg-cm1.2 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.20 s/60°300.0 deg/s50.0 RPM |
(add) | 1.96 oz55.6 g | 1.59×0.80×1.57 in 40.4×20.3×39.9 mm | — | Standard | Metal | Brushed | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | 180 | (add) | (add) | 1520 µs | 2 µs | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | -10–50°C14.0–122.0°F | None | (add) | JR (Universal) | 265 mm10.43 in | China | 1.53–1.75 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KingMax Hobby | KM5514MDHV | Hobby |
7.4V 183.4 oz-in13.20 kg-cm1.3 N-m 6.0V 161.1 oz-in11.60 kg-cm1.1 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 2.15 oz61.0 g | 1.59×0.80×1.42 in 40.4×20.3×36.1 mm | — | Standard | Aluminum | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | 180 | (add) | (add) | 1520 µs | 2 µs | 330 Hz | (add) | (add) | Yes | 6–7.4 V | (add) | (add) | -10–50°C14.0–122.0°F | None | (add) | JR (Universal) | 265 mm10.43 in | China | 2.71–3.77 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KingMax Hobby | KM5515MA | Hobby |
6.0V 212.8 oz-in15.32 kg-cm1.5 N-m 4.8V 197.2 oz-in14.20 kg-cm1.4 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.12 oz60.0 g | 1.59×0.80×1.57 in 40.4×20.3×39.9 mm | — | Standard | Aluminum | Brushed | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | 180 | (add) | (add) | 1520 µs | 4 µs | 50 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | -10–50°C14.0–122.0°F | None | (add) | JR (Universal) | 265 mm10.43 in | China | 2.03–2.46 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KingMax Hobby | KM5515MD | Hobby |
6.0V 228.5 oz-in16.45 kg-cm1.6 N-m 4.8V 192.9 oz-in13.89 kg-cm1.4 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.12 oz60.0 g | 1.59×0.80×1.58 in 40.4×20.3×40.1 mm | — | Standard | Aluminum | Brushed | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | 180 | (add) | (add) | 1520 µs | 2 µs | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | -10–50°C14.0–122.0°F | None | (add) | JR (Universal) | 265 mm10.43 in | China | 1.98–2.82 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KingMax Hobby | KM5520MA | Hobby |
6.0V 282.4 oz-in20.33 kg-cm2.0 N-m 4.8V 267.1 oz-in19.23 kg-cm1.9 N-m |
6.0V 0.17 s/60°352.9 deg/s58.8 RPM 4.8V 0.19 s/60°315.8 deg/s52.6 RPM |
(add) | 2.12 oz60.0 g | 1.59×0.80×1.57 in 40.4×20.3×39.9 mm | — | Standard | Aluminum | Brushed | (add) | Metal | 25 | Dual Bearings | Analog | (add) | (add) | 180 | (add) | (add) | 1520 µs | 4 µs | 50 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | -10–50°C14.0–122.0°F | None | (add) | JR (Universal) | 265 mm10.43 in | China | 2.60–3.07 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KingMax Hobby | KM5520MD | Hobby |
6.0V 281.3 oz-in20.25 kg-cm2.0 N-m 4.8V 248.1 oz-in17.86 kg-cm1.8 N-m |
6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.19 s/60°315.8 deg/s52.6 RPM |
(add) | 2.12 oz60.0 g | 1.59×0.80×1.57 in 40.4×20.3×39.9 mm | — | Standard | Aluminum | Brushed | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | 180 | (add) | (add) | 1520 µs | 2 µs | 330 Hz | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | -10–50°C14.0–122.0°F | None | (add) | JR (Universal) | 265 mm10.43 in | China | 2.41–3.25 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KingMax Hobby | KM5521MDHV | Hobby |
7.4V 295.9 oz-in21.30 kg-cm2.1 N-m 6.0V 257.0 oz-in18.50 kg-cm1.8 N-m |
7.4V 0.14 s/60°428.6 deg/s71.4 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 2.15 oz61.0 g | 1.59×0.80×1.42 in 40.4×20.3×36.1 mm | — | Standard | Aluminum | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | 180 | (add) | (add) | 1520 µs | 2 µs | 330 Hz | (add) | (add) | Yes | 6–7.4 V | (add) | (add) | -10–50°C14.0–122.0°F | None | (add) | JR (Universal) | 265 mm10.43 in | China | 2.97–3.91 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KingMax Hobby | KM5720MD | Hobby |
6.0V 138.9 oz-in10.00 kg-cm1.0 N-m 5.0V 277.8 oz-in20.00 kg-cm2.0 N-m |
6.0V 0.24 s/60°250.0 deg/s41.7 RPM 5.0V 0.29 s/60°206.9 deg/s34.5 RPM |
≤3000 A≤3000000 mA | 2.01 oz57.0 g | 1.58×0.80×1.58 in 40.0×20.3×40.1 mm | — | Standard | Plastic | Brushed | (add) | Metal | 25 | Dual Bearings | Digital | Counterclockwise | 90° | 180 | (add) | (add) | 1500 µs | 2 µs | 330 Hz | (add) | PWM | (add) | 5–6 V | (add) | (add) | -10–50°C14.0–122.0°F | Waterproof | (add) | JR (Universal) | 165 mm6.50 in | China | 1.07–1.77 W | — | — | — | — | — | — | — | — | — | (add) | (add) | 10.000 A10,000 mA | — | — | ||
| KO Propo | BSx2-one10 * | Hobby |
7.4V 150.0 oz-in10.80 kg-cm1.1 N-m 6.0V 111.1 oz-in8.00 kg-cm0.8 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.80 oz51.0 g | 1.59×0.83×1.02 in 40.5×21.0×26.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | (add) | Single Bearing | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | 6–7.4 V | LiPo / LiFe / Ni-MH | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 2.05–3.08 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | BSx2-Power * | Hobby |
7.4V 361.1 oz-in26.00 kg-cm2.6 N-m 6.0V 291.7 oz-in21.00 kg-cm2.1 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.24 oz63.5 g | 1.61×0.79×1.50 in 41.0×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 23 | Single Bearing | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | 6–7.4 V | LiPo / LiFe / Ni-MH | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 3.60–5.56 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | BSx2-Power-HC * | Hobby |
7.4V 361.1 oz-in26.00 kg-cm2.6 N-m 6.0V 291.7 oz-in21.00 kg-cm2.1 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.42 oz68.5 g | 1.61×0.79×1.48 in 41.0×20.0×37.5 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 23 | Single Bearing | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | 6–7.4 V | LiPo / LiFe / Ni-MH | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 3.60–5.56 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | BSx2-Response * | Hobby |
7.4V 251.4 oz-in18.10 kg-cm1.8 N-m 6.0V 213.9 oz-in15.40 kg-cm1.5 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM |
(add) | 2.20 oz62.4 g | 1.61×0.79×1.50 in 41.0×20.0×38.0 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 23 | Single Bearing | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | 6–7.4 V | LiPo / LiFe / Ni-MH | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 4.94–5.17 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | BSx2-Response-HC * | Hobby |
7.4V 361.1 oz-in26.00 kg-cm2.6 N-m 6.0V 291.7 oz-in21.00 kg-cm2.1 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.20 oz62.4 g | 1.61×0.79×1.48 in 41.0×20.0×37.5 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 23 | Single Bearing | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Yes | 6–7.4 V | LiPo / LiFe / Ni-MH | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 3.60–5.56 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | BSx3-one10-Grasper * | Hobby |
7.4V 150.0 oz-in10.80 kg-cm1.1 N-m 6.0V 111.1 oz-in8.00 kg-cm0.8 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.80 oz51.0 g | 1.59×0.83×1.02 in 40.5×21.0×26.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | HCS / PWM | Yes | 6–7.4 V | LiPo / LiFe / Ni-MH | (add) | (add) | (add) | (add) | (add) | (add) | Japan | 2.05–3.08 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | BSx4S-Grasper | Hobby |
7.4V 633.4 oz-in45.61 kg-cm4.5 N-m 6.0V 518.1 oz-in37.31 kg-cm3.7 N-m |
7.4V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.72 oz77.0 g | 1.59×0.79×1.48 in 40.4×20.0×37.5 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 23 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 6–7.4 V | LiPo / LiFe / Ni-MH | (add) | (add) | (add) | (add) | (add) | 230 mm9.06 in | Japan | 6.39–9.76 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | BSx4S-one10 * | Hobby |
7.4V 222.2 oz-in16.00 kg-cm1.6 N-m 6.0V 168.1 oz-in12.10 kg-cm1.2 N-m |
7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.80 oz51.0 g | 1.59×0.83×1.02 in 40.5×21.0×26.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | (add) | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | Yes | 6–7.4 V | LiPo / LiFe / Ni-MH | (add) | (add) | (add) | (add) | Futaba J | 180 mm7.09 in | Japan | 2.83–4.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | KOPM1100 * | Hobby | 7.2V 97.0 oz-in6.98 kg-cm0.7 N-m | 7.2V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 2.10 oz59.5 g | 1.50×0.83×1.60 in 38.1×21.1×40.6 mm | — | Standard | (add) | (add) | (add) | (add) | 23 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.99 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | KOPM1101 * | Hobby | 6.0V 91.0 oz-in6.55 kg-cm0.6 N-m | 6.0V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 2.10 oz59.5 g | 1.50×0.80×1.60 in 38.1×20.3×40.6 mm | — | Standard | (add) | (add) | (add) | (add) | 23 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.10 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | KOPM1104 * | Hobby | 6.0V 104.5 oz-in7.52 kg-cm0.7 N-m | 6.0V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 2.10 oz59.5 g | 1.50×0.80×1.60 in 38.1×20.3×40.6 mm | — | Standard | (add) | (add) | (add) | (add) | 23 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.49 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | KOPM1115 * | Hobby | 7.2V 100.4 oz-in7.23 kg-cm0.7 N-m | 7.2V 0.05 s/60°1,200.0 deg/s200.0 RPM | (add) | 1.80 oz51.0 g | 1.50×0.80×1.60 in 38.1×20.3×40.6 mm | — | Standard | (add) | (add) | (add) | (add) | 23 | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 3.71 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | PDS-2123 FET * | Hobby | 7.2V 131.9 oz-in9.50 kg-cm0.9 N-m | 7.2V 0.06 s/60°1,000.0 deg/s166.7 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.50 in 40.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | Metal | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.06 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | PDS-2143 FET * | Hobby | 6.0V 111.1 oz-in8.00 kg-cm0.8 N-m | 6.0V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 1.92 oz54.5 g | 1.61×0.79×1.50 in 40.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | (add) | 23 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | PDS-2144 FET * | Hobby | 6.0V 180.5 oz-in13.00 kg-cm1.3 N-m | 6.0V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 1.92 oz54.5 g | 1.61×0.79×1.50 in 40.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | (add) | 23 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | PDS-2343 FET * | Hobby | 6.0V 111.1 oz-in8.00 kg-cm0.8 N-m | 6.0V 0.08 s/60°750.0 deg/s125.0 RPM | (add) | 1.92 oz54.5 g | 1.61×0.79×1.50 in 40.9×20.1×38.1 mm | — | Standard | (add) | Coreless | (add) | Hybrid | 23 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| KO Propo | PDS-2344 FET * | Hobby | 6.0V 180.5 oz-in13.00 kg-cm1.3 N-m | 6.0V 0.13 s/60°461.5 deg/s76.9 RPM | (add) | 1.92 oz54.5 g | 1.61×0.79×1.50 in 40.9×20.1×38.1 mm | — | Standard | (add) | (add) | (add) | (add) | 23 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.57 W | — | — | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: KingMax Hobby
Stall Current: (add)
Shaft Power: 1.53–1.75 W
Weight: 1.96 oz55.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.57 in 40.4×20.3×39.9 mm
Case Material: Metal
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: None
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KingMax Hobby
Stall Current: (add)
Shaft Power: 2.71–3.77 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.42 in 40.4×20.3×36.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: None
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KingMax Hobby
Stall Current: (add)
Shaft Power: 2.03–2.46 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.57 in 40.4×20.3×39.9 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: None
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KingMax Hobby
Stall Current: (add)
Shaft Power: 1.98–2.82 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.58 in 40.4×20.3×40.1 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: None
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KingMax Hobby
Stall Current: (add)
Shaft Power: 2.60–3.07 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.57 in 40.4×20.3×39.9 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 4 µs
Refresh Rate: 50 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: None
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KingMax Hobby
Stall Current: (add)
Shaft Power: 2.41–3.25 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.57 in 40.4×20.3×39.9 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: None
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KingMax Hobby
Stall Current: (add)
Shaft Power: 2.97–3.91 W
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.80×1.42 in 40.4×20.3×36.1 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: None
Certification: (add)
Connector: JR (Universal)
Wire Length: 265 mm10.43 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KingMax Hobby
Stall Current: ≤3000 A≤3000000 mA
Shaft Power: 1.07–1.77 W
Weight: 2.01 oz57.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.80×1.58 in 40.0×20.3×40.1 mm
Case Material: Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: Counterclockwise
Op. Range: 90°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Waterproof
Certification: (add)
Connector: JR (Universal)
Wire Length: 165 mm6.50 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 2.05–3.08 W
Weight: 1.80 oz51.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.02 in 40.5×21.0×26.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: LiPo / LiFe / Ni-MH
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 3.60–5.56 W
Weight: 2.24 oz63.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 41.0×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: LiPo / LiFe / Ni-MH
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 3.60–5.56 W
Weight: 2.42 oz68.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.48 in 41.0×20.0×37.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: LiPo / LiFe / Ni-MH
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 4.94–5.17 W
Weight: 2.20 oz62.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 41.0×20.0×38.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: LiPo / LiFe / Ni-MH
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 3.60–5.56 W
Weight: 2.20 oz62.4 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.48 in 41.0×20.0×37.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Single Bearing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: LiPo / LiFe / Ni-MH
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 2.05–3.08 W
Weight: 1.80 oz51.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.02 in 40.5×21.0×26.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: HCS / PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: LiPo / LiFe / Ni-MH
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 6.39–9.76 W
Weight: 2.72 oz77.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.79×1.48 in 40.4×20.0×37.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: LiPo / LiFe / Ni-MH
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 230 mm9.06 in
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 2.83–4.57 W
Weight: 1.80 oz51.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.59×0.83×1.02 in 40.5×21.0×26.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: Yes
Op. Voltage: 6–7.4 V
Power Source: LiPo / LiFe / Ni-MH
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: 180 mm7.09 in
Country of Origin: Japan
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 2.99 W
Weight: 2.10 oz59.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.50×0.83×1.60 in 38.1×21.1×40.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 2.10 W
Weight: 2.10 oz59.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.50×0.80×1.60 in 38.1×20.3×40.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 1.49 W
Weight: 2.10 oz59.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.50×0.80×1.60 in 38.1×20.3×40.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 3.71 W
Weight: 1.80 oz51.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.50×0.80×1.60 in 38.1×20.3×40.6 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 4.06 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 2.57 W
Weight: 1.92 oz54.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 2.57 W
Weight: 1.92 oz54.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 2.57 W
Weight: 1.92 oz54.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.9×20.1×38.1 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Hybrid
Gear Spline/Teeth: 23
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: KO Propo
Stall Current: (add)
Shaft Power: 2.57 W
Weight: 1.92 oz54.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.50 in 40.9×20.1×38.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 23
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.