Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (5,627)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Promodeler | DS270DLHV | Hobby |
8.4V 270.0 oz-in19.44 kg-cm1.9 N-m 7.4V 235.0 oz-in16.92 kg-cm1.7 N-m 6.6V 210.0 oz-in15.12 kg-cm1.5 N-m 6.0V 190.0 oz-in13.68 kg-cm1.3 N-m 4.8V 160.0 oz-in11.52 kg-cm1.1 N-m |
8.4V 0.12 s/60°491.8 deg/s82.0 RPM 7.4V 0.14 s/60°422.5 deg/s70.4 RPM 6.6V 0.16 s/60°387.1 deg/s64.5 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM 4.8V 0.18 s/60°337.1 deg/s56.2 RPM |
2.2–3.22 A2200–3220 mA | 2.19 oz62.0 g | 1.58×0.79×1.59 in 40.1×20.1×40.4 mm | — | Standard | Aluminum / Plastic | Brushed | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 800–2200 µs | 1520 µs | 3 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | MIL-STDS | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | 298.000 | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Promodeler | DS335CLHV | Hobby |
8.4V 335.0 oz-in24.12 kg-cm2.4 N-m 7.4V 290.0 oz-in20.88 kg-cm2.0 N-m 6.6V 265.0 oz-in19.08 kg-cm1.9 N-m 6.0V 225.0 oz-in16.20 kg-cm1.6 N-m 4.8V 185.0 oz-in13.32 kg-cm1.3 N-m |
8.4V 0.13 s/60°454.5 deg/s75.8 RPM 7.4V 0.14 s/60°416.7 deg/s69.4 RPM 6.6V 0.16 s/60°377.4 deg/s62.9 RPM 6.0V 0.17 s/60°357.1 deg/s59.5 RPM 4.8V 0.18 s/60°335.2 deg/s55.9 RPM |
2.42–3.6 A2420–3600 mA | 1.55 oz44.0 g | 1.40×0.59×1.17 in 35.6×15.0×29.7 mm | — | Mini | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | 200 | 3.03 ms | 800–2200 µs | 1520 µs | 3 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | (add) | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | 270.000 | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Promodeler | DS355CLHV | Hobby |
8.4V 355.0 oz-in25.56 kg-cm2.5 N-m 7.4V 315.0 oz-in22.68 kg-cm2.2 N-m 6.6V 295.0 oz-in21.24 kg-cm2.1 N-m 6.0V 270.0 oz-in19.44 kg-cm1.9 N-m 4.8V 230.0 oz-in16.56 kg-cm1.6 N-m |
8.4V 0.08 s/60°779.2 deg/s129.9 RPM 7.4V 0.09 s/60°689.7 deg/s114.9 RPM 6.6V 0.10 s/60°606.1 deg/s101.0 RPM 6.0V 0.11 s/60°555.6 deg/s92.6 RPM 4.8V 0.14 s/60°431.7 deg/s71.9 RPM |
2.42–3.6 A2420–3600 mA | 1.55 oz44.0 g | 1.40×0.59×1.17 in 35.6×15.0×29.7 mm | — | Mini | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 125° | 130 | (add) | 800–2200 µs | 1520 µs | 2 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | 2S LiPo | (add) | -10–50°C14.0–122.0°F | Water Resistant | MIL-STD-810G-Part 16 | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Promodeler | DS360DLHV | Hobby |
8.4V 360.0 oz-in25.92 kg-cm2.5 N-m 7.4V 330.0 oz-in23.76 kg-cm2.3 N-m 6.6V 290.0 oz-in20.88 kg-cm2.0 N-m 6.0V 270.0 oz-in19.44 kg-cm1.9 N-m 4.8V 250.0 oz-in18.00 kg-cm1.8 N-m |
8.4V 0.15 s/60°402.7 deg/s67.1 RPM 7.4V 0.16 s/60°365.9 deg/s61.0 RPM 6.6V 0.18 s/60°335.2 deg/s55.9 RPM 6.0V 0.20 s/60°304.6 deg/s50.8 RPM 4.8V 0.20 s/60°297.0 deg/s49.5 RPM |
2.35–3.35 A2350–3350 mA | 2.19 oz62.0 g | 1.58×0.79×1.59 in 40.1×20.1×40.4 mm | — | Standard | Aluminum | Brushed | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 125° | 180 | (add) | 800–2200 µs | 1520 µs | 3 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | MIL-STD | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Promodeler | DS405BLHV | Hobby |
8.4V 405.0 oz-in29.16 kg-cm2.9 N-m 7.4V 380.0 oz-in27.36 kg-cm2.7 N-m 6.6V 360.0 oz-in25.92 kg-cm2.5 N-m 6.0V 335.0 oz-in24.12 kg-cm2.4 N-m 4.8V 305.0 oz-in21.96 kg-cm2.2 N-m |
8.4V 0.05 s/60°1,200.0 deg/s200.0 RPM 7.4V 0.06 s/60°1,034.5 deg/s172.4 RPM 6.6V 0.07 s/60°869.6 deg/s144.9 RPM 6.0V 0.08 s/60°722.9 deg/s120.5 RPM 4.8V 0.10 s/60°606.1 deg/s101.0 RPM |
2.53–3.8 A2530–3800 mA | 1.87 oz53.0 g | 1.42×0.59×1.30 in 36.1×15.0×33.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 125° | 170 | (add) | 800–2200 µs | 1520 µs | 3 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | 2S LiPo | (add) | -10–50°C14.0–122.0°F | (add) | (add) | JR (Universal) | 279 mm11.00 in | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Promodeler | DS415BLHV | Hobby |
8.4V 415.0 oz-in29.88 kg-cm2.9 N-m 7.4V 375.0 oz-in27.00 kg-cm2.6 N-m 6.6V 345.0 oz-in24.84 kg-cm2.4 N-m 6.0V 290.0 oz-in20.88 kg-cm2.0 N-m 4.8V 245.0 oz-in17.64 kg-cm1.7 N-m |
8.4V 0.05 s/60°1,153.8 deg/s192.3 RPM 7.4V 0.06 s/60°983.6 deg/s163.9 RPM 6.6V 0.07 s/60°909.1 deg/s151.5 RPM 6.0V 0.08 s/60°759.5 deg/s126.6 RPM 4.8V 0.10 s/60°631.6 deg/s105.3 RPM |
4.65–7.15 A4650–7150 mA | 2.12 oz60.0 g | 1.58×0.79×1.51 in 40.1×20.1×38.4 mm | — | Mini | Nylon / Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 125° | 220 | (add) | 800–2200 µs | 1520 µs | 2 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Promodeler | DS465BLHV | Hobby |
8.4V 465.0 oz-in33.48 kg-cm3.3 N-m 7.4V 445.0 oz-in32.04 kg-cm3.1 N-m 6.6V 410.0 oz-in29.52 kg-cm2.9 N-m 6.0V 340.0 oz-in24.48 kg-cm2.4 N-m 4.8V 310.0 oz-in22.32 kg-cm2.2 N-m |
8.4V 0.10 s/60°588.2 deg/s98.0 RPM 7.4V 0.11 s/60°550.5 deg/s91.7 RPM 6.6V 0.12 s/60°491.8 deg/s82.0 RPM 6.0V 0.13 s/60°461.5 deg/s76.9 RPM 4.8V 0.15 s/60°392.2 deg/s65.4 RPM |
3.1–5.25 A3100–5250 mA | 2.57 oz73.0 g | 1.57×0.79×1.18 in 39.9×20.1×30.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 15 | Dual Bearings | Digital | (add) | 180° | 360 | (add) | 800–2200 µs | 1520 µs | 3 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Promodeler | DS490BLHV | Hobby |
8.4V 490.0 oz-in35.28 kg-cm3.5 N-m 7.4V 470.0 oz-in33.84 kg-cm3.3 N-m 6.6V 435.0 oz-in31.32 kg-cm3.1 N-m 6.0V 370.0 oz-in26.64 kg-cm2.6 N-m 4.8V 325.0 oz-in23.40 kg-cm2.3 N-m |
8.4V 0.08 s/60°769.2 deg/s128.2 RPM 7.4V 0.08 s/60°722.9 deg/s120.5 RPM 6.6V 0.10 s/60°594.1 deg/s99.0 RPM 6.0V 0.11 s/60°531.0 deg/s88.5 RPM 4.8V 0.13 s/60°454.5 deg/s75.8 RPM |
3.3–5.5 A3300–5500 mA | 2.57 oz73.0 g | 1.57×0.79×1.18 in 39.9×20.1×30.0 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 15 | Dual Bearings | Digital | (add) | 125° | 360 | (add) | 800–2200 µs | 1520 µs | 3 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Promodeler | DS505BLHV | Hobby |
8.4V 505.0 oz-in36.36 kg-cm3.6 N-m 7.4V 480.0 oz-in34.56 kg-cm3.4 N-m 6.6V 450.0 oz-in32.40 kg-cm3.2 N-m 6.0V 380.0 oz-in27.36 kg-cm2.7 N-m 4.8V 330.0 oz-in23.76 kg-cm2.3 N-m |
8.4V 0.09 s/60°638.3 deg/s106.4 RPM 7.4V 0.11 s/60°555.6 deg/s92.6 RPM 6.6V 0.12 s/60°500.0 deg/s83.3 RPM 6.0V 0.14 s/60°444.4 deg/s74.1 RPM 4.8V 0.16 s/60°379.7 deg/s63.3 RPM |
3.5–5.8 A3500–5800 mA | 2.96 oz84.0 g | 1.60×0.83×1.48 in 40.6×21.1×37.6 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 180° | 180 | (add) | 800–2200 µs | 1520 µs | 2 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Promodeler | DS630BLHV | Hobby |
8.4V 630.0 oz-in45.36 kg-cm4.4 N-m 7.4V 555.0 oz-in39.96 kg-cm3.9 N-m 6.6V 485.0 oz-in34.92 kg-cm3.4 N-m 6.0V 445.0 oz-in32.04 kg-cm3.1 N-m 4.8V 360.0 oz-in25.92 kg-cm2.5 N-m |
8.4V 0.10 s/60°618.6 deg/s103.1 RPM 7.4V 0.11 s/60°550.5 deg/s91.7 RPM 6.6V 0.12 s/60°491.8 deg/s82.0 RPM 6.0V 0.14 s/60°431.7 deg/s71.9 RPM 4.8V 0.17 s/60°357.1 deg/s59.5 RPM |
2.9–4.95 A2900–4950 mA | 2.96 oz84.0 g | 1.59×0.83×1.47 in 40.4×21.1×37.3 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 150° | 180 | (add) | 800–2200 µs | 1520 µs | 2 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | 2S LiPo | (add) | -10–50°C14.0–122.0°F | Water Resistant | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Promodeler | DS635BLHV | Hobby |
8.4V 635.0 oz-in45.72 kg-cm4.5 N-m 7.4V 555.0 oz-in39.96 kg-cm3.9 N-m 6.6V 515.0 oz-in37.08 kg-cm3.6 N-m 6.0V 485.0 oz-in34.92 kg-cm3.4 N-m 4.8V 415.0 oz-in29.88 kg-cm2.9 N-m |
8.4V 0.04 s/60°1,428.6 deg/s238.1 RPM 7.4V 0.05 s/60°1,132.1 deg/s188.7 RPM 6.6V 0.06 s/60°1,034.5 deg/s172.4 RPM 6.0V 0.07 s/60°882.4 deg/s147.1 RPM 4.8V 0.09 s/60°666.7 deg/s111.1 RPM |
6.5–10 A6500–10000 mA | 3.21 oz91.0 g | 1.58×0.79×1.54 in 40.1×20.1×39.1 mm | — | Standard | Aluminum | Brushless | (add) | Stainless Steel | 15 | Dual Bearings | Digital | (add) | 125° | 360 | (add) | 800–2200 µs | 1520 µs | 3 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Promodeler | DS75CLHV | Hobby |
8.4V 75.0 oz-in5.40 kg-cm0.5 N-m 7.4V 65.0 oz-in4.68 kg-cm0.5 N-m 6.6V 58.0 oz-in4.18 kg-cm0.4 N-m 6.0V 52.0 oz-in3.74 kg-cm0.4 N-m 4.8V 45.0 oz-in3.24 kg-cm0.3 N-m |
8.4V 0.08 s/60°759.5 deg/s126.6 RPM 7.4V 0.09 s/60°652.2 deg/s108.7 RPM 6.6V 0.10 s/60°594.1 deg/s99.0 RPM 6.0V 0.13 s/60°454.5 deg/s75.8 RPM 4.8V 0.15 s/60°408.2 deg/s68.0 RPM |
0.8–1.11 A800–1110 mA | 0.56 oz16.0 g | 0.89×0.50×1.04 in 22.6×12.7×26.4 mm | — | Micro | Aluminum | Coreless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 150° | 180 | (add) | 800–2200 µs | 1520 µs | 2 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | 2S LiPo | (add) | -10–50°C14.0–122.0°F | Water Resistant | MIL-STD-810G Part 16 | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Promodeler | DS845BLHV | Hobby |
8.4V 845.0 oz-in60.85 kg-cm6.0 N-m 7.4V 740.0 oz-in53.29 kg-cm5.2 N-m 6.6V 655.0 oz-in47.17 kg-cm4.6 N-m 6.0V 625.0 oz-in45.00 kg-cm4.4 N-m 4.8V 485.0 oz-in34.92 kg-cm3.4 N-m |
8.4V 0.06 s/60°1,034.5 deg/s172.4 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.6V 0.08 s/60°769.2 deg/s128.2 RPM 6.0V 0.09 s/60°659.3 deg/s109.9 RPM 4.8V 0.11 s/60°540.5 deg/s90.1 RPM |
6.6–10.1 A6600–10100 mA | 3.21 oz91.0 g | 1.58×0.79×1.54 in 40.1×20.1×39.1 mm | — | Standard | Aluminum | Brushless | (add) | Stainless Steel | 15 | Dual Bearings | Digital | (add) | 125° | 360 | (add) | 800–2200 µs | 1520 µs | 3 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | MIL-STD-810G-Part 16 | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Standard | (add) | — | — | ||
| Promodeler | DS905BLWR | Hobby |
12.0V 905.0 oz-in65.17 kg-cm6.4 N-m 8.4V 755.0 oz-in54.37 kg-cm5.3 N-m 7.4V 625.0 oz-in45.00 kg-cm4.4 N-m 6.6V 505.0 oz-in36.36 kg-cm3.6 N-m 6.0V 425.0 oz-in30.60 kg-cm3.0 N-m |
12.0V 0.10 s/60°625.0 deg/s104.2 RPM 8.4V 0.13 s/60°451.1 deg/s75.2 RPM 7.4V 0.16 s/60°379.7 deg/s63.3 RPM 6.6V 0.17 s/60°359.3 deg/s59.9 RPM 6.0V 0.17 s/60°346.8 deg/s57.8 RPM |
3.5–8.4 A3500–8400 mA | 3.21 oz91.0 g | 1.57×0.79×1.61 in 39.9×20.1×40.9 mm | — | Standard | Aluminum | Brushless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | 125° | 125 | 3.03 ms | 800–2200 µs | 1500 µs | 2 µs | 330 Hz | Potentiometer | PWM | No | 6–12 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Promodeler | DS90DLHV | Hobby |
8.4V 90.0 oz-in6.48 kg-cm0.6 N-m 7.4V 82.0 oz-in5.90 kg-cm0.6 N-m 6.6V 68.0 oz-in4.90 kg-cm0.5 N-m 6.0V 62.0 oz-in4.46 kg-cm0.4 N-m 4.8V 57.0 oz-in4.10 kg-cm0.4 N-m |
8.4V 0.17 s/60°363.6 deg/s60.6 RPM 7.4V 0.17 s/60°348.8 deg/s58.1 RPM 6.6V 0.20 s/60°306.1 deg/s51.0 RPM 6.0V 0.21 s/60°288.5 deg/s48.1 RPM 4.8V 0.25 s/60°243.9 deg/s40.7 RPM |
2.2–3.2 A2200–3200 mA | 2.15 oz61.0 g | 1.58×0.79×1.59 in 40.1×20.1×40.4 mm | — | Standard | Aluminum | Brushed | (add) | Stainless Steel | 25 | Dual Bearings | Digital | (add) | 125° | 180 | (add) | 800–2200 µs | 1520 µs | 3 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Promodeler | DS930BLHV | Hobby |
8.4V 930.0 oz-in66.97 kg-cm6.6 N-m 7.4V 835.0 oz-in60.13 kg-cm5.9 N-m 6.6V 785.0 oz-in56.53 kg-cm5.5 N-m 6.0V 710.0 oz-in51.13 kg-cm5.0 N-m 4.8V 570.0 oz-in41.04 kg-cm4.0 N-m |
8.4V 0.12 s/60°495.9 deg/s82.6 RPM 7.4V 0.13 s/60°465.1 deg/s77.5 RPM 6.6V 0.15 s/60°394.7 deg/s65.8 RPM 6.0V 0.17 s/60°357.1 deg/s59.5 RPM 4.8V 0.20 s/60°304.6 deg/s50.8 RPM |
4.71–6.7 A4710–6700 mA | 3.00 oz85.0 g | 1.57×0.79×1.54 in 39.9×20.1×39.1 mm | — | Standard | Aluminum | Brushless | (add) | Steel | 25 | Dual Bearings | Digital | (add) | 150° | 150 | (add) | 800–2200 µs | 1520 µs | 2 µs | 330 Hz | Potentiometer | PWM | No | 4.8–8.4 V | (add) | (add) | -10–50°C14.0–122.0°F | Water Resistant | (add) | JR (Universal) | (add) | (add) | — | Boxed | (add) | — | — | — | — | — | — | — | (add) | Positional | (add) | — | — | ||
| Protech | B1021 * | Hobby | 4.8V 4.2 oz-in0.30 kg-cm0.0 N-m | 4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 0.07 oz2.1 g | 0.79×0.24×0.24 in 20.1×6.1×6.1 mm | — | Nano | (add) | (add) | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.04 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Protech | B1044 * | Hobby | 4.8V 18.1 oz-in1.30 kg-cm0.1 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.16 oz4.4 g | 0.75×0.30×0.63 in 19.0×7.6×16.0 mm | — | Nano | (add) | (add) | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.33 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Protech | B1049 * | Hobby | 4.8V 21.2 oz-in1.53 kg-cm0.1 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.17 oz4.9 g | 0.79×0.31×0.64 in 20.1×7.9×16.3 mm | — | Micro | (add) | (add) | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.39 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Protech | B1054 * | Hobby | 6.0V 15.0 oz-in1.08 kg-cm0.1 N-m | 6.0V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.19 oz5.4 g | 0.79×0.31×0.69 in 20.1×7.9×17.5 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.28 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Protech | B106 * | Hobby | 6.0V 10.4 oz-in0.75 kg-cm0.1 N-m | 6.0V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.15 oz4.3 g | 0.69×0.26×0.70 in 17.5×6.6×17.8 mm | — | Nano | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 3–4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.19 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | |||
| Protech | B1062 * | Hobby | 4.8V 18.1 oz-in1.30 kg-cm0.1 N-m | 4.8V 0.10 s/60°600.0 deg/s100.0 RPM | (add) | 0.22 oz6.2 g | 0.87×0.39×0.69 in 22.1×9.9×17.5 mm | — | Micro | (add) | (add) | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.33 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Protech | B109 * | Hobby | 4.8V 21.2 oz-in1.53 kg-cm0.1 N-m | 4.8V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 0.32 oz9.0 g | 1.06×0.35×0.94 in 26.9×8.9×23.9 mm | — | Slim | (add) | (add) | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.25 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Protech | B112 * | Hobby | 4.8V 33.9 oz-in2.44 kg-cm0.2 N-m | 4.8V 0.14 s/60°428.6 deg/s71.4 RPM | (add) | 0.56 oz16.0 g | 1.16×0.55×0.98 in 29.5×14.0×24.9 mm | — | Mini | (add) | (add) | (add) | Plastic | (add) | Single Bearing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.45 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Protech | B150 * | Hobby | 4.8V 8.3 oz-in0.60 kg-cm0.1 N-m | 4.8V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | 0.18 oz5.0 g | 0.87×0.43×0.83 in 22.1×10.9×21.1 mm | — | Micro | (add) | (add) | (add) | Plastic | (add) | Bushing | Analog | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | PWM | (add) | 4.8 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.13 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Promodeler
Stall Current: 2.2–3.22 A2200–3220 mA
Shaft Power: —
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.59 in 40.1×20.1×40.4 mm
Case Material: Aluminum / Plastic
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: MIL-STDS
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 298.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 2.42–3.6 A2420–3600 mA
Shaft Power: —
Weight: 1.55 oz44.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.17 in 35.6×15.0×29.7 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 200
Pulse Cycle: 3.03 ms
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: 270.000
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 2.42–3.6 A2420–3600 mA
Shaft Power: —
Weight: 1.55 oz44.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.40×0.59×1.17 in 35.6×15.0×29.7 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 125°
Mech. Limit: 130
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: MIL-STD-810G-Part 16
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 2.35–3.35 A2350–3350 mA
Shaft Power: —
Weight: 2.19 oz62.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.59 in 40.1×20.1×40.4 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 125°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: MIL-STD
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 2.53–3.8 A2530–3800 mA
Shaft Power: —
Weight: 1.87 oz53.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.42×0.59×1.30 in 36.1×15.0×33.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 125°
Mech. Limit: 170
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 279 mm11.00 in
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 4.65–7.15 A4650–7150 mA
Shaft Power: —
Weight: 2.12 oz60.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.58×0.79×1.51 in 40.1×20.1×38.4 mm
Case Material: Nylon / Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 125°
Mech. Limit: 220
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 3.1–5.25 A3100–5250 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.18 in 39.9×20.1×30.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 360
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 3.3–5.5 A3300–5500 mA
Shaft Power: —
Weight: 2.57 oz73.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.18 in 39.9×20.1×30.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 125°
Mech. Limit: 360
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 3.5–5.8 A3500–5800 mA
Shaft Power: —
Weight: 2.96 oz84.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.60×0.83×1.48 in 40.6×21.1×37.6 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 180°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 2.9–4.95 A2900–4950 mA
Shaft Power: —
Weight: 2.96 oz84.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.83×1.47 in 40.4×21.1×37.3 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 150°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 6.5–10 A6500–10000 mA
Shaft Power: —
Weight: 3.21 oz91.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.54 in 40.1×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 125°
Mech. Limit: 360
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 0.8–1.11 A800–1110 mA
Shaft Power: —
Weight: 0.56 oz16.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.89×0.50×1.04 in 22.6×12.7×26.4 mm
Case Material: Aluminum
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 150°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: 2S LiPo
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: MIL-STD-810G Part 16
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 6.6–10.1 A6600–10100 mA
Shaft Power: —
Weight: 3.21 oz91.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.54 in 40.1×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 15
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 125°
Mech. Limit: 360
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: MIL-STD-810G-Part 16
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 3.5–8.4 A3500–8400 mA
Shaft Power: —
Weight: 3.21 oz91.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.61 in 39.9×20.1×40.9 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 125°
Mech. Limit: 125
Pulse Cycle: 3.03 ms
Pulse Width: 800–2200 µs
Neutral Pos.: 1500 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 6–12 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 2.2–3.2 A2200–3200 mA
Shaft Power: —
Weight: 2.15 oz61.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.59 in 40.1×20.1×40.4 mm
Case Material: Aluminum
Motor Type: Brushed
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 125°
Mech. Limit: 180
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 3 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Promodeler
Stall Current: 4.71–6.7 A4710–6700 mA
Shaft Power: —
Weight: 3.00 oz85.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.57×0.79×1.54 in 39.9×20.1×39.1 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Steel
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: 150°
Mech. Limit: 150
Pulse Cycle: (add)
Pulse Width: 800–2200 µs
Neutral Pos.: 1520 µs
Dead Band: 2 µs
Refresh Rate: 330 Hz
Angle Sensor: Potentiometer
Control System: PWM
Programmable: No
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: -10–50°C14.0–122.0°F
Water Rating: Water Resistant
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: Boxed
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Protech
Stall Current: (add)
Shaft Power: 0.04 W
Weight: 0.07 oz2.1 g
Size Class: Nano
Diameter: —
Dimensions: 0.79×0.24×0.24 in 20.1×6.1×6.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Protech
Stall Current: (add)
Shaft Power: 0.33 W
Weight: 0.16 oz4.4 g
Size Class: Nano
Diameter: —
Dimensions: 0.75×0.30×0.63 in 19.0×7.6×16.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Protech
Stall Current: (add)
Shaft Power: 0.39 W
Weight: 0.17 oz4.9 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.31×0.64 in 20.1×7.9×16.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Protech
Stall Current: (add)
Shaft Power: 0.28 W
Weight: 0.19 oz5.4 g
Size Class: Micro
Diameter: —
Dimensions: 0.79×0.31×0.69 in 20.1×7.9×17.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Protech
Stall Current: (add)
Shaft Power: 0.19 W
Weight: 0.15 oz4.3 g
Size Class: Nano
Diameter: —
Dimensions: 0.69×0.26×0.70 in 17.5×6.6×17.8 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 3–4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Protech
Stall Current: (add)
Shaft Power: 0.33 W
Weight: 0.22 oz6.2 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.39×0.69 in 22.1×9.9×17.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Protech
Stall Current: (add)
Shaft Power: 0.25 W
Weight: 0.32 oz9.0 g
Size Class: Slim
Diameter: —
Dimensions: 1.06×0.35×0.94 in 26.9×8.9×23.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Protech
Stall Current: (add)
Shaft Power: 0.45 W
Weight: 0.56 oz16.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.16×0.55×0.98 in 29.5×14.0×24.9 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Protech
Stall Current: (add)
Shaft Power: 0.13 W
Weight: 0.18 oz5.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.43×0.83 in 22.1×10.9×21.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: Analog
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.