Discover XQ-Power Servos in Our eBay Store!
Shop NowSearch Matches (2,636)
- Weight: Greater than 1.76 ounces (50 grams)
- Torque: Greater than 417 oz-in (30.03 kg-cm / 2.9 N-m) @ 48 volts
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Xcore | XDF-3 * | Hobby |
6.0V 194.4 oz-in14.00 kg-cm1.4 N-m 4.8V 152.8 oz-in11.00 kg-cm1.1 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.17 oz61.5 g | 1.614×0.787×1.398 in 41.0×20.0×35.5 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.88–3.00 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xcore | XDF-4 * | Hobby |
6.0V 236.1 oz-in17.00 kg-cm1.7 N-m 4.8V 187.5 oz-in13.50 kg-cm1.3 N-m |
6.0V 0.14 s/60°428.6 deg/s71.4 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.17 oz61.5 g | 1.614×0.787×1.398 in 41.0×20.0×35.5 mm | — | Standard | (add) | Coreless | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.93–3.12 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xcore | XDF-5 * | Hobby |
6.0V 159.7 oz-in11.50 kg-cm1.1 N-m 4.8V 125.0 oz-in9.00 kg-cm0.9 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.24 oz63.5 g | 1.614×0.787×1.535 in 41.0×20.0×39.0 mm | — | Standard | (add) | (add) | (add) | (add) | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.93–2.95 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xcore | XDF-6 * | Hobby |
6.0V 208.3 oz-in15.00 kg-cm1.5 N-m 4.8V 159.7 oz-in11.50 kg-cm1.1 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 2.24 oz63.5 g | 1.614×0.787×1.535 in 41.0×20.0×39.0 mm | — | Standard | (add) | (add) | (add) | (add) | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.97–3.21 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xcore | XDF-7 * | Hobby |
6.0V 243.0 oz-in17.50 kg-cm1.7 N-m 4.8V 194.4 oz-in14.00 kg-cm1.4 N-m |
6.0V 0.15 s/60°400.0 deg/s66.7 RPM 4.8V 0.18 s/60°333.3 deg/s55.6 RPM |
(add) | 2.29 oz65.0 g | 1.614×0.787×1.614 in 41.0×20.0×41.0 mm | — | Standard | (add) | (add) | (add) | (add) | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 2.00–3.00 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xcore | XDF-8 * | Hobby |
6.0V 298.6 oz-in21.50 kg-cm2.1 N-m 4.8V 236.1 oz-in17.00 kg-cm1.7 N-m |
6.0V 0.18 s/60°333.3 deg/s55.6 RPM 4.8V 0.22 s/60°272.7 deg/s45.5 RPM |
(add) | 2.29 oz65.0 g | 1.614×0.787×1.614 in 41.0×20.0×41.0 mm | — | Standard | (add) | (add) | (add) | Metal | 25 | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–8.4 V | LiPo | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1.98–3.07 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | AS-1661-HV | Hobby |
8.4V 1,083.4 oz-in78.01 kg-cm7.7 N-m 7.4V 1,014.0 oz-in73.01 kg-cm7.2 N-m 6.0V 882.0 oz-in63.51 kg-cm6.2 N-m |
8.4V 0.12 s/60°508.5 deg/s84.7 RPM 7.4V 0.13 s/60°454.5 deg/s75.8 RPM 6.0V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 3.00 oz85.0 g | 1.614×0.827×1.63 in 41.0×21.0×41.4 mm | — | Standard | Aluminum | Brushless | (add) | Stainless Steel | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | (add) | (add) | PWM | (add) | 4.7–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 10.19–16.98 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | AS-6501-HV | Hobby |
8.4V 349.2 oz-in25.14 kg-cm2.5 N-m 7.4V 305.2 oz-in21.97 kg-cm2.2 N-m |
8.4V 0.10 s/60°625.0 deg/s104.2 RPM 7.4V 0.14 s/60°431.7 deg/s71.9 RPM |
(add) | 2.50 oz71.0 g | 1.575×0.787×1.488 in 40.0×20.0×37.8 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | (add) | (add) | PWM | (add) | 4.8–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 4.06–6.73 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | AS-8601-HV | Hobby |
8.4V 530.6 oz-in38.21 kg-cm3.7 N-m 7.4V 467.4 oz-in33.66 kg-cm3.3 N-m 6.0V 378.6 oz-in27.27 kg-cm2.7 N-m |
8.4V 0.10 s/60°600.0 deg/s100.0 RPM 7.4V 0.11 s/60°545.5 deg/s90.9 RPM 6.0V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 2.81 oz79.8 g | 1.575×1.594×0.787 in 40.0×40.5×20.0 mm | — | Standard | Aluminum / Plastic | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | (add) | (add) | PWM | (add) | 4.7–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 5.00–9.81 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | GS-3302T-HV | Hobby |
8.4V 233.4 oz-in16.80 kg-cm1.6 N-m 7.4V 205.6 oz-in14.80 kg-cm1.5 N-m 6.0V 166.7 oz-in12.00 kg-cm1.2 N-m |
8.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 7.4V 0.05 s/60°1,333.3 deg/s222.2 RPM 6.0V 0.06 s/60°1,071.4 deg/s178.6 RPM |
(add) | 2.47 oz70.0 g | 1.575×1.488×0.787 in 40.0×37.8×20.0 mm | — | Standard | Aluminum / Plastic | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 800 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 5.50–10.79 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | GS-5401-HV | Hobby |
8.4V 277.7 oz-in20.00 kg-cm2.0 N-m 7.4V 255.5 oz-in18.40 kg-cm1.8 N-m 6.0V 224.9 oz-in16.19 kg-cm1.6 N-m |
8.4V 0.07 s/60°821.9 deg/s137.0 RPM 7.4V 0.08 s/60°800.0 deg/s133.3 RPM 6.0V 0.08 s/60°714.3 deg/s119.0 RPM |
(add) | 2.12 oz60.0 g | 1.63×0.823×1.339 in 41.4×20.9×34.0 mm | — | Low Profile | Aluminum | Brushless | (add) | Stainless Steel | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 250–2000 µs | 1520 µs | (add) | 1000 Hz | (add) | PWM | (add) | 5–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 4.95–7.03 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | GS-6401-HV | Hobby |
8.4V 416.7 oz-in30.01 kg-cm2.9 N-m 7.4V 367.1 oz-in26.43 kg-cm2.6 N-m 6.0V 297.7 oz-in21.43 kg-cm2.1 N-m |
8.4V 0.06 s/60°967.7 deg/s161.3 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°697.7 deg/s116.3 RPM |
(add) | 2.47 oz70.0 g | 1.575×0.787×1.488 in 40.0×20.0×37.8 mm | — | Standard | Aluminum / Plastic | Brushless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 400 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | Waterproof | (add) | (add) | (add) | USA | 6.40–12.43 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | HS-2202T-HV | Hobby |
8.4V 105.0 oz-in7.56 kg-cm0.7 N-m 7.4V 102.7 oz-in7.40 kg-cm0.7 N-m 6.0V 83.3 oz-in6.00 kg-cm0.6 N-m |
8.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 7.4V 0.04 s/60°1,578.9 deg/s263.2 RPM 6.0V 0.05 s/60°1,276.6 deg/s212.8 RPM |
(add) | 2.60 oz73.6 g | 1.575×0.787×1.488 in 40.0×20.0×37.8 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 333 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 3.28–5.55 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | HS-2203-HV | Hobby |
8.4V 84.0 oz-in6.05 kg-cm0.6 N-m 7.4V 74.0 oz-in5.33 kg-cm0.5 N-m 6.0V 60.0 oz-in4.32 kg-cm0.4 N-m |
8.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 2.18 oz61.9 g | 1.575×1.488×0.787 in 40.0×37.8×20.0 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 2.22–4.44 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | HS-2204T-HV | Hobby |
8.4V 105.0 oz-in7.56 kg-cm0.7 N-m 7.4V 92.5 oz-in6.66 kg-cm0.7 N-m |
8.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM |
≥6 A≥6000 mA | 2.52 oz71.5 g | 1.575×0.787×1.594 in 40.0×20.0×40.5 mm | — | Standard | Aluminum | Brushless | (add) | Stainless Steel | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 1000 Hz | (add) | PWM | (add) | 7.4–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 4.28–5.55 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | HS-6402-HV | Hobby |
8.4V 416.7 oz-in30.01 kg-cm2.9 N-m 7.4V 367.1 oz-in26.43 kg-cm2.6 N-m 6.0V 297.7 oz-in21.43 kg-cm2.1 N-m |
8.4V 0.06 s/60°967.7 deg/s161.3 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.09 s/60°697.7 deg/s116.3 RPM |
(add) | 2.54 oz72.0 g | 1.575×1.488×0.787 in 40.0×37.8×20.0 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 400 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | Waterproof | (add) | (add) | (add) | USA | 6.40–12.43 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | HS-6403-HV | Hobby |
8.4V 416.7 oz-in30.01 kg-cm2.9 N-m 7.4V 367.1 oz-in26.43 kg-cm2.6 N-m |
8.4V 0.06 s/60°967.7 deg/s161.3 RPM 7.4V 0.07 s/60°857.1 deg/s142.9 RPM |
≥6 A≥6000 mA | 2.58 oz73.2 g | 1.575×0.787×1.594 in 40.0×20.0×40.5 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1000 Hz | (add) | PWM | (add) | 7.4–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 9.70–12.43 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | PM-3402 | Hobby |
6.6V 229.2 oz-in16.50 kg-cm1.6 N-m 6.0V 208.4 oz-in15.00 kg-cm1.5 N-m 4.8V 166.7 oz-in12.00 kg-cm1.2 N-m |
6.6V 0.07 s/60°869.6 deg/s144.9 RPM 6.0V 0.07 s/60°857.1 deg/s142.9 RPM 4.8V 0.09 s/60°689.7 deg/s114.9 RPM |
(add) | 1.83 oz52.0 g | 1.606×0.795×1.055 in 40.8×20.2×26.8 mm | — | Low Profile | Aluminum | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–6.6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 3.54–6.14 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | SI-2201 | Hobby |
6.6V 101.8 oz-in7.33 kg-cm0.7 N-m 6.0V 92.5 oz-in6.66 kg-cm0.7 N-m 4.8V 74.0 oz-in5.33 kg-cm0.5 N-m |
6.6V 0.04 s/60°1,666.7 deg/s277.8 RPM 6.0V 0.04 s/60°1,500.0 deg/s250.0 RPM 4.8V 0.05 s/60°1,200.0 deg/s200.0 RPM |
(add) | 2.20 oz62.5 g | 1.575×1.488×0.787 in 40.0×37.8×20.0 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–6.6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 2.74–5.23 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | SI-2201-HV | Hobby |
8.4V 105.0 oz-in7.56 kg-cm0.7 N-m 7.4V 92.5 oz-in6.66 kg-cm0.7 N-m 6.0V 75.0 oz-in5.40 kg-cm0.5 N-m |
8.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,224.5 deg/s204.1 RPM |
(add) | 2.20 oz62.5 g | 1.575×0.787×1.488 in 40.0×20.0×37.8 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 2.83–5.55 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | SI-2202T-HV | Hobby |
8.4V 105.0 oz-in7.56 kg-cm0.7 N-m 7.4V 92.5 oz-in6.66 kg-cm0.7 N-m 6.0V 75.0 oz-in5.40 kg-cm0.5 N-m |
8.4V 0.04 s/60°1,714.3 deg/s285.7 RPM 7.4V 0.04 s/60°1,500.0 deg/s250.0 RPM 6.0V 0.05 s/60°1,224.5 deg/s204.1 RPM |
(add) | 2.20 oz62.5 g | 1.575×0.787×1.488 in 40.0×20.0×37.8 mm | — | Standard | Aluminum | Brushless | (add) | Aluminum | 25 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | 760 µs | (add) | 333 Hz | (add) | PWM | (add) | 6–8.4 V | LiPo | (add) | (add) | (add) | (add) | (add) | (add) | USA | 2.83–5.55 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | SI-4401-HV | Hobby |
8.4V 261.1 oz-in18.80 kg-cm1.8 N-m 7.4V 230.0 oz-in16.56 kg-cm1.6 N-m 6.0V 186.5 oz-in13.43 kg-cm1.3 N-m |
8.4V 0.08 s/60°759.5 deg/s126.6 RPM 7.4V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.11 s/60°540.5 deg/s90.1 RPM |
(add) | 2.20 oz62.5 g | 1.575×0.787×1.488 in 40.0×20.0×37.8 mm | — | Standard | Aluminum / Plastic | Brushless | (add) | Aluminum | 25 | Dual Bearings | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 6–8.4 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 3.11–6.11 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | SI-4431 | Hobby |
6.6V 267.4 oz-in19.25 kg-cm1.9 N-m 6.0V 243.1 oz-in17.50 kg-cm1.7 N-m 4.8V 194.5 oz-in14.00 kg-cm1.4 N-m |
6.6V 0.07 s/60°857.1 deg/s142.9 RPM 6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 2.20 oz62.5 g | 1.575×0.787×1.488 in 40.0×20.0×37.8 mm | — | Standard | Aluminum | Brushless | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–6.6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 3.60–7.06 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | SI-4531 | Hobby |
6.6V 290.3 oz-in20.90 kg-cm2.0 N-m 6.0V 263.9 oz-in19.00 kg-cm1.9 N-m 4.8V 211.1 oz-in15.20 kg-cm1.5 N-m |
6.6V 0.09 s/60°666.7 deg/s111.1 RPM 6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 2.20 oz62.5 g | 1.575×1.488×0.787 in 40.0×37.8×20.0 mm | — | Standard | Aluminum / Plastic | Brushless | (add) | Metal | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–6.6 V | (add) | (add) | (add) | (add) | (add) | (add) | (add) | USA | 3.25–5.96 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Xpert RC | WR-4401 | Hobby |
6.6V 281.1 oz-in20.24 kg-cm2.0 N-m 6.0V 255.6 oz-in18.40 kg-cm1.8 N-m 4.8V 204.5 oz-in14.72 kg-cm1.4 N-m |
6.6V 0.08 s/60°779.2 deg/s129.9 RPM 6.0V 0.09 s/60°705.9 deg/s117.6 RPM 4.8V 0.11 s/60°566.0 deg/s94.3 RPM |
(add) | 2.48 oz70.3 g | 1.575×0.787×1.488 in 40.0×20.0×37.8 mm | — | Standard | Aluminum / Plastic | Brushless | (add) | Metal | (add) | Bushing | (add) | (add) | (add) | (add) | (add) | (add) | 1520 µs | (add) | 333 Hz | (add) | PWM | (add) | 4.8–6.6 V | (add) | (add) | (add) | IP67 | (add) | DuPont | (add) | USA | 3.57–6.75 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: Xcore
Stall Current: (add)
Shaft Power: 1.88–3.00 W
Weight: 2.17 oz61.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.614×0.787×1.398 in 41.0×20.0×35.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xcore
Stall Current: (add)
Shaft Power: 1.93–3.12 W
Weight: 2.17 oz61.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.614×0.787×1.398 in 41.0×20.0×35.5 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xcore
Stall Current: (add)
Shaft Power: 1.93–2.95 W
Weight: 2.24 oz63.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.614×0.787×1.535 in 41.0×20.0×39.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xcore
Stall Current: (add)
Shaft Power: 1.97–3.21 W
Weight: 2.24 oz63.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.614×0.787×1.535 in 41.0×20.0×39.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xcore
Stall Current: (add)
Shaft Power: 2.00–3.00 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.614×0.787×1.614 in 41.0×20.0×41.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xcore
Stall Current: (add)
Shaft Power: 1.98–3.07 W
Weight: 2.29 oz65.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.614×0.787×1.614 in 41.0×20.0×41.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: LiPo
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 10.19–16.98 W
Weight: 3.00 oz85.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.614×0.827×1.63 in 41.0×21.0×41.4 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.7–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 4.06–6.73 W
Weight: 2.50 oz71.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.488 in 40.0×20.0×37.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 5.00–9.81 W
Weight: 2.81 oz79.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×1.594×0.787 in 40.0×40.5×20.0 mm
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.7–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 5.50–10.79 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×1.488×0.787 in 40.0×37.8×20.0 mm
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 800 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 4.95–7.03 W
Weight: 2.12 oz60.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.63×0.823×1.339 in 41.4×20.9×34.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: 250–2000 µs
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 5–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 6.40–12.43 W
Weight: 2.47 oz70.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.488 in 40.0×20.0×37.8 mm
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 3.28–5.55 W
Weight: 2.60 oz73.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.488 in 40.0×20.0×37.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 2.22–4.44 W
Weight: 2.18 oz61.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×1.488×0.787 in 40.0×37.8×20.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: ≥6 A≥6000 mA
Shaft Power: 4.28–5.55 W
Weight: 2.52 oz71.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.594 in 40.0×20.0×40.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Stainless Steel
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 6.40–12.43 W
Weight: 2.54 oz72.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×1.488×0.787 in 40.0×37.8×20.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 400 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: ≥6 A≥6000 mA
Shaft Power: 9.70–12.43 W
Weight: 2.58 oz73.2 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.594 in 40.0×20.0×40.5 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: 1000 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 7.4–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 3.54–6.14 W
Weight: 1.83 oz52.0 g
Size Class: Low Profile
Diameter: —
Dimensions: 1.606×0.795×1.055 in 40.8×20.2×26.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 2.74–5.23 W
Weight: 2.20 oz62.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×1.488×0.787 in 40.0×37.8×20.0 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 2.83–5.55 W
Weight: 2.20 oz62.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.488 in 40.0×20.0×37.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 2.83–5.55 W
Weight: 2.20 oz62.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.488 in 40.0×20.0×37.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 760 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: LiPo
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 3.11–6.11 W
Weight: 2.20 oz62.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.488 in 40.0×20.0×37.8 mm
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Aluminum
Gear Spline/Teeth: 25
Rotation: Dual Bearings
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 6–8.4 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 3.60–7.06 W
Weight: 2.20 oz62.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.488 in 40.0×20.0×37.8 mm
Case Material: Aluminum
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 3.25–5.96 W
Weight: 2.20 oz62.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×1.488×0.787 in 40.0×37.8×20.0 mm
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Xpert RC
Stall Current: (add)
Shaft Power: 3.57–6.75 W
Weight: 2.48 oz70.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.575×0.787×1.488 in 40.0×20.0×37.8 mm
Case Material: Aluminum / Plastic
Motor Type: Brushless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Bushing
Modulation: (add)
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: 1520 µs
Dead Band: (add)
Refresh Rate: 333 Hz
Angle Sensor: (add)
Control System: PWM
Programmable: (add)
Op. Voltage: 4.8–6.6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: IP67
Certification: (add)
Connector: DuPont
Wire Length: (add)
Country of Origin: USA
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.