Discover XQ-Power Servos in Our eBay Store!
Shop NowDigital Servos (3,687)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Make | Model | Category | Torque | Speed | Stall Current |
Weight | Dimensions (L×W×H) |
Diameter | Size Class |
Case Material |
Motor Type |
Motor Drive |
Gear Material |
Gear Spline/ Teeth |
Rotation | Modulation | Direction | Op. Range |
Mech. Limit |
Pulse Cycle |
Pulse Width |
Neutral Pos. |
Dead Band |
Refresh Rate |
Angle Sensor |
Control System |
Programmable | Op. Voltage |
Power Source |
Regulator Type |
Temperature | Water Rating |
Certification | Connector | Wire Length |
Country of Origin |
Shaft Power |
Shape | Shaft Size |
Resolution | Gear Ratio |
Baud Rate |
Output Power |
Radial Load |
MCU | Operating Modes |
Running Current |
Rotation Mode |
Idle Current |
Backlash | Signal Voltage |
Compare | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| We may earn a commission from your purchase. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| INO-Lab | HG-D251MG * | Hobby |
6.0V 77.8 oz-in5.60 kg-cm0.5 N-m 4.8V 66.7 oz-in4.80 kg-cm0.5 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.15 s/60°400.0 deg/s66.7 RPM |
(add) | 0.85 oz24.0 g | 1.18×0.51×1.31 in 30.0×13.0×33.3 mm | — | Mini | (add) | Coreless | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.82–1.20 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D255HB * | Hobby | (add) | (add) | (add) | (add) | (add) | — | Unknown | (add) | (add) | (add) | Plastic | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D260HB * | Hobby |
6.0V 47.2 oz-in3.40 kg-cm0.3 N-m 4.8V 33.3 oz-in2.40 kg-cm0.2 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.59 oz16.9 g | 1.18×0.51×1.24 in 30.0×13.0×31.5 mm | — | Mini | (add) | 3-pole | (add) | Plastic | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.51–0.87 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D260MG * | Hobby |
6.0V 55.5 oz-in4.00 kg-cm0.4 N-m 4.8V 47.2 oz-in3.40 kg-cm0.3 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.16 s/60°375.0 deg/s62.5 RPM |
(add) | 0.74 oz21.1 g | 1.18×0.51×1.24 in 30.0×13.0×31.5 mm | — | Mini | (add) | (add) | (add) | Metal | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.55–0.86 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D261HB * | Hobby |
6.0V 50.0 oz-in3.60 kg-cm0.4 N-m 4.8V 33.3 oz-in2.40 kg-cm0.2 N-m |
6.0V 0.06 s/60°1,000.0 deg/s166.7 RPM 4.8V 0.07 s/60°857.1 deg/s142.9 RPM |
(add) | 0.73 oz20.7 g | 1.18×0.51×1.31 in 30.0×13.0×33.3 mm | — | Mini | (add) | Coreless | (add) | Plastic | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.88–1.54 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D262HB * | Hobby |
6.0V 29.2 oz-in2.10 kg-cm0.2 N-m 4.8V 25.0 oz-in1.80 kg-cm0.2 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 0.59 oz16.7 g | 1.18×0.51×1.24 in 30.0×13.0×31.5 mm | — | Mini | (add) | 3-pole | (add) | Plastic | (add) | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 0.46–0.67 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D650HB * | Hobby |
6.0V 106.9 oz-in7.70 kg-cm0.8 N-m 4.8V 98.6 oz-in7.10 kg-cm0.7 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 1.68 oz47.6 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | 3-pole | (add) | Plastic | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.40–1.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D650MG * | Hobby |
6.0V 106.9 oz-in7.70 kg-cm0.8 N-m 4.8V 98.6 oz-in7.10 kg-cm0.7 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.13 s/60°461.5 deg/s76.9 RPM |
(add) | 1.68 oz47.6 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | 3-pole | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.40–1.80 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D660HB * | Hobby | (add) | (add) | (add) | (add) | (add) | — | Unknown | (add) | (add) | (add) | Plastic | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D660MG * | Hobby |
6.0V 100.0 oz-in7.20 kg-cm0.7 N-m 4.8V 86.1 oz-in6.20 kg-cm0.6 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.69 oz47.9 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | 3-pole | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.45–2.05 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D750HB * | Hobby | (add) | (add) | (add) | (add) | (add) | — | Unknown | (add) | (add) | (add) | Plastic | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D750MG * | Hobby |
6.0V 215.3 oz-in15.50 kg-cm1.5 N-m 4.8V 170.8 oz-in12.30 kg-cm1.2 N-m |
6.0V 0.12 s/60°500.0 deg/s83.3 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.78 oz50.5 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.26–3.32 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D751MG * | Hobby |
6.0V 215.3 oz-in15.50 kg-cm1.5 N-m 4.8V 170.8 oz-in12.30 kg-cm1.2 N-m |
6.0V 0.11 s/60°545.5 deg/s90.9 RPM 4.8V 0.14 s/60°428.6 deg/s71.4 RPM |
(add) | 1.90 oz53.8 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.26–3.62 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D760HB * | Hobby |
6.0V 106.9 oz-in7.70 kg-cm0.8 N-m 4.8V 94.4 oz-in6.80 kg-cm0.7 N-m |
6.0V 0.08 s/60°750.0 deg/s125.0 RPM 4.8V 0.10 s/60°600.0 deg/s100.0 RPM |
(add) | 1.68 oz47.6 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Plastic | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.75–2.47 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D760MG * | Hobby |
6.0V 161.1 oz-in11.60 kg-cm1.1 N-m 4.8V 136.1 oz-in9.80 kg-cm1.0 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.84 oz52.3 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.29–3.31 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| INO-Lab | HG-D761MG * | Hobby |
6.0V 161.1 oz-in11.60 kg-cm1.1 N-m 4.8V 136.1 oz-in9.80 kg-cm1.0 N-m |
6.0V 0.09 s/60°666.7 deg/s111.1 RPM 4.8V 0.11 s/60°545.5 deg/s90.9 RPM |
(add) | 1.90 oz53.8 g | 1.55×0.77×1.44 in 39.4×19.6×36.6 mm | — | Standard | (add) | Coreless | (add) | Metal | (add) | Dual Bearings | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 2.29–3.31 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Integy | C22510D * | Hobby | (add) | (add) | (add) | (add) | 0.96×0.45×0.91 in 24.4×11.4×23.1 mm | — | Micro | (add) | (add) | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Integy | DS3120MG | Hobby | 6.0V 277.8 oz-in20.00 kg-cm2.0 N-m | 6.0V 0.16 s/60°375.0 deg/s62.5 RPM | (add) | 2.12 oz60.0 g | 1.58×0.79×1.59 in 40.0×20.0×40.5 mm | — | Standard | Metal | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 6–6 V | (add) | (add) | (add) | (add) | (add) | (add) | 320 mm12.60 in | China | 3.21 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Integy | DS3235SG | Hobby | 6.0V 486.2 oz-in35.01 kg-cm3.4 N-m | 6.0V 0.12 s/60°500.0 deg/s83.3 RPM | (add) | (add) | (add) | — | Unknown | (add) | Coreless | (add) | (add) | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | Waterproof | (add) | (add) | (add) | China | 7.49 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Integy | MG946R | Hobby | 4.8V 145.9 oz-in10.50 kg-cm1.0 N-m | 4.8V 0.20 s/60°300.0 deg/s50.0 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.46 in 40.9×20.1×37.1 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | (add) | 1.35 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Integy | MG996R | Hobby | 4.8V 130.6 oz-in9.40 kg-cm0.9 N-m | 4.8V 0.17 s/60°352.9 deg/s58.8 RPM | (add) | 1.94 oz55.0 g | 1.61×0.79×1.46 in 40.9×20.1×37.1 mm | — | Standard | (add) | (add) | (add) | Metal | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | JR (Universal) | (add) | China | 1.42 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Jamara | 5g Digi * | Hobby |
6.0V 17.4 oz-in1.25 kg-cm0.1 N-m 4.8V 13.9 oz-in1.00 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.18 oz5.0 g | 0.87×0.39×0.64 in 22.1×9.9×16.3 mm | — | Micro | (add) | (add) | (add) | Plastic | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.21–0.32 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Jamara | 929HMG | Hobby | (add) | (add) | ≤730 A≤730000 mA | 0.49 oz14.0 g | 0.89×0.45×1.10 in 22.5×11.5×28.0 mm | — | Micro | (add) | (add) | (add) | Metal | 21 | Single Bearing | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | JR (Universal) | 212 mm8.35 in | Germany | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Jamara | Atom Mini Digital * | Hobby | 4.8V 13.9 oz-in1.00 kg-cm0.1 N-m |
6.0V 0.10 s/60°600.0 deg/s100.0 RPM 4.8V 0.12 s/60°500.0 deg/s83.3 RPM |
(add) | 0.16 oz4.4 g | 0.75×0.30×0.62 in 19.0×7.6×15.7 mm | — | Nano | (add) | (add) | (add) | Plastic | (add) | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 0.21 W | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
| Jamara | Q4 ST4119 | Hobby | (add) | (add) | ≤1000 A≤1000000 mA | 1.31 oz37.0 g | 1.59×0.77×1.61 in 40.5×19.5×41.0 mm | — | Standard | (add) | (add) | (add) | Plastic | 25 | (add) | Digital | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | (add) | 4.8–6 V | (add) | (add) | (add) | (add) | (add) | Futaba J | 300 mm11.81 in | Germany | — | — | (add) | — | — | — | — | — | — | — | (add) | (add) | (add) | — | — | ||
Make: INO-Lab
Stall Current: (add)
Shaft Power: 0.82–1.20 W
Weight: 0.85 oz24.0 g
Size Class: Mini
Diameter: —
Dimensions: 1.18×0.51×1.31 in 30.0×13.0×33.3 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 0.51–0.87 W
Weight: 0.59 oz16.9 g
Size Class: Mini
Diameter: —
Dimensions: 1.18×0.51×1.24 in 30.0×13.0×31.5 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 0.55–0.86 W
Weight: 0.74 oz21.1 g
Size Class: Mini
Diameter: —
Dimensions: 1.18×0.51×1.24 in 30.0×13.0×31.5 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 0.88–1.54 W
Weight: 0.73 oz20.7 g
Size Class: Mini
Diameter: —
Dimensions: 1.18×0.51×1.31 in 30.0×13.0×33.3 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 0.46–0.67 W
Weight: 0.59 oz16.7 g
Size Class: Mini
Diameter: —
Dimensions: 1.18×0.51×1.24 in 30.0×13.0×31.5 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 1.40–1.80 W
Weight: 1.68 oz47.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 1.40–1.80 W
Weight: 1.68 oz47.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 1.45–2.05 W
Weight: 1.69 oz47.9 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: 3-pole
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 2.26–3.32 W
Weight: 1.78 oz50.5 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 2.26–3.62 W
Weight: 1.90 oz53.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 1.75–2.47 W
Weight: 1.68 oz47.6 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 2.29–3.31 W
Weight: 1.84 oz52.3 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: INO-Lab
Stall Current: (add)
Shaft Power: 2.29–3.31 W
Weight: 1.90 oz53.8 g
Size Class: Standard
Diameter: —
Dimensions: 1.55×0.77×1.44 in 39.4×19.6×36.6 mm
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: Dual Bearings
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Integy
Stall Current: (add)
Shaft Power: —
Weight: (add)
Size Class: Micro
Diameter: —
Dimensions: 0.96×0.45×0.91 in 24.4×11.4×23.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Integy
Stall Current: (add)
Shaft Power: 3.21 W
Weight: 2.12 oz60.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.58×0.79×1.59 in 40.0×20.0×40.5 mm
Case Material: Metal
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 6–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: 320 mm12.60 in
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Integy
Stall Current: (add)
Shaft Power: 7.49 W
Weight: (add)
Size Class: Unknown
Diameter: —
Dimensions: (add)
Case Material: (add)
Motor Type: Coreless
Motor Drive: (add)
Gear Material: (add)
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: Waterproof
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Integy
Stall Current: (add)
Shaft Power: 1.35 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.46 in 40.9×20.1×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Integy
Stall Current: (add)
Shaft Power: 1.42 W
Weight: 1.94 oz55.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.61×0.79×1.46 in 40.9×20.1×37.1 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: (add)
Country of Origin: China
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Jamara
Stall Current: (add)
Shaft Power: 0.21–0.32 W
Weight: 0.18 oz5.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.87×0.39×0.64 in 22.1×9.9×16.3 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Jamara
Stall Current: ≤730 A≤730000 mA
Shaft Power: —
Weight: 0.49 oz14.0 g
Size Class: Micro
Diameter: —
Dimensions: 0.89×0.45×1.10 in 22.5×11.5×28.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Metal
Gear Spline/Teeth: 21
Rotation: Single Bearing
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: JR (Universal)
Wire Length: 212 mm8.35 in
Country of Origin: Germany
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Jamara
Stall Current: (add)
Shaft Power: 0.21 W
Weight: 0.16 oz4.4 g
Size Class: Nano
Diameter: —
Dimensions: 0.75×0.30×0.62 in 19.0×7.6×15.7 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: (add)
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: (add)
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: (add)
Wire Length: (add)
Country of Origin: (add)
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Make: Jamara
Stall Current: ≤1000 A≤1000000 mA
Shaft Power: —
Weight: 1.31 oz37.0 g
Size Class: Standard
Diameter: —
Dimensions: 1.59×0.77×1.61 in 40.5×19.5×41.0 mm
Case Material: (add)
Motor Type: (add)
Motor Drive: (add)
Gear Material: Plastic
Gear Spline/Teeth: 25
Rotation: (add)
Modulation: Digital
Direction: (add)
Op. Range: (add)
Mech. Limit: (add)
Pulse Cycle: (add)
Pulse Width: (add)
Neutral Pos.: (add)
Dead Band: (add)
Refresh Rate: (add)
Angle Sensor: (add)
Control System: (add)
Programmable: (add)
Op. Voltage: 4.8–6 V
Power Source: (add)
Regulator Type: (add)
Temperature: (add)
Water Rating: (add)
Certification: (add)
Connector: Futaba J
Wire Length: 300 mm11.81 in
Country of Origin: Germany
Shape: —
Shaft Size: —
Resolution: —
Gear Ratio: —
Baud Rate: —
Output Power: —
Radial Load: —
MCU: —
Operating Modes: —
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Unable to load results. Please try again.